Teradek Bolt 3000 Deluxe Kit
SDI/HDMI Wireless Video Transceiver Set with Receiver V Mount Included

OUR PART #  10-0995-1V

Log In for price!

Don't have an account? Apply today!

Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro. 

The Bolt 3000 Deluxe Kit from Teradek has everything you need to get up and running with Bolt. It comes with a Bolt 3000 Transmitter and Receiver set with options for 1 or 2 Receivers, an antenna array to improve reception, a Dual Battery Mount plate for the Receiver, that can all fit with the included SKB Utility Case. With highly refined software, new wireless radios, and a redesigned chassis, these models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.

Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. Teradek has also improved reconnect times so your wireless link is restored instantly when you come back into range.

Teradek Bolt 3000 Deluxe Kit Includes:

  • 1 x Protective SKB Case
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Dual V-Mount Battery Plate 14.4V
  • 4 x Bolt TX Color Identification Brackets to easily identify Bolt Sets (Red, Yellow, Green, Blue)
  • 4 x Bolt RX Color Identification Brackets to easily identify Bolt Sets (Red, Yellow, Green, Blue)
  • 1 x 2 pin Lemo to PowerTap - 11 inch Cable
  • 2 x SDI Cables (BNC to BNC)
  • 2 x HDMI Cables (Type A to Type A)
  • 1 x 1-Year Warranty

Teradek Bolt 3000 Deluxe Kit Features:

  • Longer Range: Transmit visually lossless video up to 3000ft with no delay.
  • 2 New DFS Channels: Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
  • Individual Identity: Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Built-In HDMI to SDI Converter: Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • 20MHz Channels: Use more than twice as many Bolts in one location or avoid interference like never before.
  • 20% Smaller Chassis: Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Rapid Reconnection: Reconnect times during a dropped link are now instantaneous once you move back into range.
  • More Robust Than Ever Before: Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link Teradek has ever created.

Teradek Bolt 3000 Deluxe Kit Specifications:

  • Part Number: 10-0995-1V
  • Bolt Pro 3000 3G-SDI/HDMI TX:
    • Video:
      • Video Inputs:
        • 1 x SD/HD/3G-SDI (75 Ohm BNC)
        • 1 x Type A receptacle HDMI
        • Video Outputs: 1 x HD/SD/3G-SDI Loop-out (75Ohm BNC)
        • SDI Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers.
      • Color Sampling:
        • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
        • HDMI: RGB 4:4:4, 8-bit
        • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf 23.98/24/25/29.97/30
      • 1080i 50/59.94/60
      • 720p 50/59.94/60
      • 480p 59.94/576p50 (via HDMI ports only)
      • 480i (NTSC)/576i(PAL) 
    • Video Processing:
      • Video Compression: visually lossless
      • Color Correction:
      • CDL/1024 1D LUT (supports 10-bit color)
      • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Processing:
      • Audio Compression: 48kHz 24-bit PCM 
    • Physical:
      • Dimensions: 0.95" x 2.6" x 4.47" (24 x 66 x 101.5 mm)
      • Weight: 8oz (226g)
      • Construction:
        • Milled Aluminum(Chassis) andregulation-compliant PCB
        • Plastic Cap 
    • Network:
      • Wireless:
        • Non-DFS Frequencies:
          • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
          • EU & JP: 5.19 ~ 5.23 GHz
        • DFS Frequencies:
          • US: 5.27 ~ 5.55 GHz and 5.67 GHz
          • EU & JP: 5.27 ~ 5.67 GHz
    • RF Channel Selection:
      • Auto 
      • Configurable Channel selection
      • Encryption: AES-128
      • RF Power: 22dbm EIRP(with two 5dbi TX antennas)
      • Range: Up to 3000ft line of sight
      • Unicast Multicast: Unicast / Multicast
      • Noise Rejection: Can coexist with WiFi and 5GHz cordless phones
    • Power:
      • Power Input: 2-Pin Connector 7-28 VDC
      • Battery: None
      • Nominal Power Consumption: 7.5 Watts (Measured at 1080p60)
      • Operating Temperature: 32 ~ 122°F (0 ~ 50°C)
  • Bolt Pro 3000 3G-SDI/HDMI TX:
    • Video:
      • Video Outputs:
        • 1 x SD/HD/3G-SDI (75 Ohm BNC)
        • 1 x HDMI Type-A receptacle
        • 1 x USB 3.0 micro B receptacle
        • SDI Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers.
    • Color Sampling:
      • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
      • HDMI: RGB 4:4:4, 8-bit
      • Delay Tx To Rx: <0.001sec (when no video format conversion isenabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
      • 480p59.94/576p50 (via HDMI ports only)
      • 480i(NTSC)/576i(PAL)
    • Video Processing:
      • Video Compression: Visually lossless
      • Test Pattern Generator Support: Custom output formatted test pattern over HDMI and SDI.
      • Color Correction:
        • CDL/1024 1D LUT (supports 10-bit color)
        • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Processing:
      • Audio Compression: 48kHz 24-bit PCM
    • Physical:
      • Dimensions: 5.5” x 3.5” x 1.0” (139 x 88.5 x 25 mm)
      • Weight: 13.3oz (376g)
      • Construction:
        • Milled Aluminum(Chassis) and regulation-compliant PCB
        • Plastic Cap 
    • Network:
      • Wireless:
        • Non-DFS Frequencies:
          • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
          • EU & JP: 5.19 ~ 5.23 GHz
        • DFS Frequencies:
          • US: 5.27 ~ 5.55 GHz and 5.67 GHz
          • EU & JP: 5.27 ~ 5.67 GHz
        • RF Channel Selection:
          • Auto
          • Configurable Channel selection
        • Encryption: AES-128
        • RF Power: 17dbm EIRP (with one 2dbi TX antenna)
        • Range: Up to 3000ft line of sight
        • Unicast Multicast: Unicast / Multicast
        • Noise Rejection: Can coexist with WiFi and 5GHz cordless phones 
    • Power:
      • Power Input: 2-Pin Connector 7-28 VDC
      • Battery: None
      • Nominal Power Consumption: 8.5 Watts (Measured at1080p60)
      • Operating Temperature: 32 ~ 122°F (0 ~ 50°C)

 

 

Teradek Bolt 3000 Deluxe Kit
SDI/HDMI Wireless Video Transceiver Set with Receiver V Mount Included

OUR PART #  10-0995-1V

Product Information:

Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro. 

The Bolt 3000 Deluxe Kit from Teradek has everything you need to get up and running with Bolt. It comes with a Bolt 3000 Transmitter and Receiver set with options for 1 or 2 Receivers, an antenna array to improve reception, a Dual Battery Mount plate for the Receiver, that can all fit with the included SKB Utility Case. With highly refined software, new wireless radios, and a redesigned chassis, these models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.

Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. Teradek has also improved reconnect times so your wireless link is restored instantly when you come back into range.

Teradek Bolt 3000 Deluxe Kit Includes:

  • 1 x Protective SKB Case
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Dual V-Mount Battery Plate 14.4V
  • 4 x Bolt TX Color Identification Brackets to easily identify Bolt Sets (Red, Yellow, Green, Blue)
  • 4 x Bolt RX Color Identification Brackets to easily identify Bolt Sets (Red, Yellow, Green, Blue)
  • 1 x 2 pin Lemo to PowerTap - 11 inch Cable
  • 2 x SDI Cables (BNC to BNC)
  • 2 x HDMI Cables (Type A to Type A)
  • 1 x 1-Year Warranty

Teradek Bolt 3000 Deluxe Kit Features:

  • Longer Range: Transmit visually lossless video up to 3000ft with no delay.
  • 2 New DFS Channels: Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
  • Individual Identity: Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Built-In HDMI to SDI Converter: Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • 20MHz Channels: Use more than twice as many Bolts in one location or avoid interference like never before.
  • 20% Smaller Chassis: Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Rapid Reconnection: Reconnect times during a dropped link are now instantaneous once you move back into range.
  • More Robust Than Ever Before: Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link Teradek has ever created.

Teradek Bolt 3000 Deluxe Kit Specifications:

  • Part Number: 10-0995-1V
  • Bolt Pro 3000 3G-SDI/HDMI TX:
    • Video:
      • Video Inputs:
        • 1 x SD/HD/3G-SDI (75 Ohm BNC)
        • 1 x Type A receptacle HDMI
        • Video Outputs: 1 x HD/SD/3G-SDI Loop-out (75Ohm BNC)
        • SDI Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers.
      • Color Sampling:
        • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
        • HDMI: RGB 4:4:4, 8-bit
        • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf 23.98/24/25/29.97/30
      • 1080i 50/59.94/60
      • 720p 50/59.94/60
      • 480p 59.94/576p50 (via HDMI ports only)
      • 480i (NTSC)/576i(PAL) 
    • Video Processing:
      • Video Compression: visually lossless
      • Color Correction:
      • CDL/1024 1D LUT (supports 10-bit color)
      • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Processing:
      • Audio Compression: 48kHz 24-bit PCM 
    • Physical:
      • Dimensions: 0.95" x 2.6" x 4.47" (24 x 66 x 101.5 mm)
      • Weight: 8oz (226g)
      • Construction:
        • Milled Aluminum(Chassis) andregulation-compliant PCB
        • Plastic Cap 
    • Network:
      • Wireless:
        • Non-DFS Frequencies:
          • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
          • EU & JP: 5.19 ~ 5.23 GHz
        • DFS Frequencies:
          • US: 5.27 ~ 5.55 GHz and 5.67 GHz
          • EU & JP: 5.27 ~ 5.67 GHz
    • RF Channel Selection:
      • Auto 
      • Configurable Channel selection
      • Encryption: AES-128
      • RF Power: 22dbm EIRP(with two 5dbi TX antennas)
      • Range: Up to 3000ft line of sight
      • Unicast Multicast: Unicast / Multicast
      • Noise Rejection: Can coexist with WiFi and 5GHz cordless phones
    • Power:
      • Power Input: 2-Pin Connector 7-28 VDC
      • Battery: None
      • Nominal Power Consumption: 7.5 Watts (Measured at 1080p60)
      • Operating Temperature: 32 ~ 122°F (0 ~ 50°C)
  • Bolt Pro 3000 3G-SDI/HDMI TX:
    • Video:
      • Video Outputs:
        • 1 x SD/HD/3G-SDI (75 Ohm BNC)
        • 1 x HDMI Type-A receptacle
        • 1 x USB 3.0 micro B receptacle
        • SDI Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers.
    • Color Sampling:
      • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
      • HDMI: RGB 4:4:4, 8-bit
      • Delay Tx To Rx: <0.001sec (when no video format conversion isenabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
      • 480p59.94/576p50 (via HDMI ports only)
      • 480i(NTSC)/576i(PAL)
    • Video Processing:
      • Video Compression: Visually lossless
      • Test Pattern Generator Support: Custom output formatted test pattern over HDMI and SDI.
      • Color Correction:
        • CDL/1024 1D LUT (supports 10-bit color)
        • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Processing:
      • Audio Compression: 48kHz 24-bit PCM
    • Physical:
      • Dimensions: 5.5” x 3.5” x 1.0” (139 x 88.5 x 25 mm)
      • Weight: 13.3oz (376g)
      • Construction:
        • Milled Aluminum(Chassis) and regulation-compliant PCB
        • Plastic Cap 
    • Network:
      • Wireless:
        • Non-DFS Frequencies:
          • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
          • EU & JP: 5.19 ~ 5.23 GHz
        • DFS Frequencies:
          • US: 5.27 ~ 5.55 GHz and 5.67 GHz
          • EU & JP: 5.27 ~ 5.67 GHz
        • RF Channel Selection:
          • Auto
          • Configurable Channel selection
        • Encryption: AES-128
        • RF Power: 17dbm EIRP (with one 2dbi TX antenna)
        • Range: Up to 3000ft line of sight
        • Unicast Multicast: Unicast / Multicast
        • Noise Rejection: Can coexist with WiFi and 5GHz cordless phones 
    • Power:
      • Power Input: 2-Pin Connector 7-28 VDC
      • Battery: None
      • Nominal Power Consumption: 8.5 Watts (Measured at1080p60)
      • Operating Temperature: 32 ~ 122°F (0 ~ 50°C)

 

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM