ETC/Elec Theatre Controls Source 4WRD-C-1
LED Retrofit Module with Grounded 20A Twistlock Connector, White

OUR PART #  S4WRD-C-1-WHITE


ETC's Source 4WRD-C-1 (Watt Reduction Device) LED, part of their Source 4WRD series, is a replacement for a standard Source Four® burner assembly that converts the HPL source to a whilte-light LED and delivers a significant reduction in power consumption. This particular model comes in a white housing and is terminated with a grounded 20A twistlock connector.

It's a simple and quick upgrade that is nondestructive and takes less than a minute. In most cases, it can even be performed without breaking the fixture's focus. The Source 4WRD LED is theatrically dimmable using DMX, or line dimmable, with a traditional LED curve, to enable flexibility for your installation. And, because it's an LED source, your fixtures will run cool and efficient without lamp replacements.

Applications:

  • Energy saving retrofits
  • Houses of worship
  • Universities and schools
  • Hospitality
  • Retail
  • Exhibition centers
  • Meeting rooms
  • Clubs
  • Cafetoriums
  • Theaters

ETC Source 4WRD-C-1 Specifications:

  • Physical:
    • Rugged, die cast aluminum construction
    • Can be fitted to any Source Four fixture body (not for Source Four Par/nel, Fresnel, or jr.)
    • (7) segment display for simple DMX setup
    • 2-button user interface
    • Easy mounting with single screw attachment
    • Replaces Source Four burner assembly
    • IP20 rating for indoor use only
    • UL and cUL Listed
      • UL1598C
  • Electrical:
    • 114-125V, 60 Hz
    • 155 Watt draw at full (182 Watt theoretical max draw)
    • 30,000 hour L70 rating (ETC estimate)
    • DMX in and thru via RJ45 connector (DMX is not self-terminating)
    • AC and DMX dimmable
    • (2) fixtures per circuit (D20 module) when using AC dimming
    • (14) fixtures per non-dim circuit (R20 module) when using DMX dimming
    • Inrush: 30A (first half-cycle) at 120V
    • Typical Power Consumption at 120V:
      • Idle Power / Current:
        • DMX Mode: 1.2W/0.046A
        • AC Mode: 0W
      • Full Intensity Power / Current: 155.7W/1.35A
  • Optical:
    • Tool free field adjustment
    • LED lamp consisting of four CREE LED modules
      • LED lamp is fragile and should not be touched
    • 3000K, 80CRI output
    • Uses the Source Four ellipsoidal's existing reflector and optical system
  • Thermal/Environmental:
    • 41° F to 104° F operating range (5° to 40° C)
      • Fixture must be above freezing temperatures for one hour before being energized
    • Quiet fan cooling
    • Fixture is designed for continuous operation up to 104° F (40° C) ambient temperature, and requires free flow of air around fixture housing
DMX to RJ45 Data Accessory Kit
ETC/Elec Theatre Controls 7067K1001 DMX to RJ45 Data Accessory Kit
The 7067K1001 DMX to RJ45 Data Accessory Kit from ETC is designed for use with ETC's Source 4WRD and ColorSource fixtures. Well suited for adapting a run of RJ45 fixtures to an existing 5-pin infrastructure, this kit includes two RJ45 to ...
RJ45 DMX Terminator
ETC/Elec Theatre Controls N4086 RJ45 DMX Terminator
The N4086 from ETC is an RJ45 DMX terminator.
RJ45 to Female 5-Pin XLR adapter
ETC/Elec Theatre Controls W6538 RJ45 to Female 5-Pin XLR adapter
The W6538 from ETC is an RJ45 to 5-pin XLR female adapter.
RJ45 to Male 5-Pin XLR adapter
ETC/Elec Theatre Controls W6539 RJ45 to Male 5-Pin XLR adapter
The W6539 from ETC is an RJ45 to 5-pin XLR male adapter.

ETC/Elec Theatre Controls Source 4WRD-C-1
LED Retrofit Module with Grounded 20A Twistlock Connector, White

OUR PART #  S4WRD-C-1-WHITE

Product Information:

ETC's Source 4WRD-C-1 (Watt Reduction Device) LED, part of their Source 4WRD series, is a replacement for a standard Source Four® burner assembly that converts the HPL source to a whilte-light LED and delivers a significant reduction in power consumption. This particular model comes in a white housing and is terminated with a grounded 20A twistlock connector.

It's a simple and quick upgrade that is nondestructive and takes less than a minute. In most cases, it can even be performed without breaking the fixture's focus. The Source 4WRD LED is theatrically dimmable using DMX, or line dimmable, with a traditional LED curve, to enable flexibility for your installation. And, because it's an LED source, your fixtures will run cool and efficient without lamp replacements.

Applications:

  • Energy saving retrofits
  • Houses of worship
  • Universities and schools
  • Hospitality
  • Retail
  • Exhibition centers
  • Meeting rooms
  • Clubs
  • Cafetoriums
  • Theaters

ETC Source 4WRD-C-1 Specifications:

  • Physical:
    • Rugged, die cast aluminum construction
    • Can be fitted to any Source Four fixture body (not for Source Four Par/nel, Fresnel, or jr.)
    • (7) segment display for simple DMX setup
    • 2-button user interface
    • Easy mounting with single screw attachment
    • Replaces Source Four burner assembly
    • IP20 rating for indoor use only
    • UL and cUL Listed
      • UL1598C
  • Electrical:
    • 114-125V, 60 Hz
    • 155 Watt draw at full (182 Watt theoretical max draw)
    • 30,000 hour L70 rating (ETC estimate)
    • DMX in and thru via RJ45 connector (DMX is not self-terminating)
    • AC and DMX dimmable
    • (2) fixtures per circuit (D20 module) when using AC dimming
    • (14) fixtures per non-dim circuit (R20 module) when using DMX dimming
    • Inrush: 30A (first half-cycle) at 120V
    • Typical Power Consumption at 120V:
      • Idle Power / Current:
        • DMX Mode: 1.2W/0.046A
        • AC Mode: 0W
      • Full Intensity Power / Current: 155.7W/1.35A
  • Optical:
    • Tool free field adjustment
    • LED lamp consisting of four CREE LED modules
      • LED lamp is fragile and should not be touched
    • 3000K, 80CRI output
    • Uses the Source Four ellipsoidal's existing reflector and optical system
  • Thermal/Environmental:
    • 41° F to 104° F operating range (5° to 40° C)
      • Fixture must be above freezing temperatures for one hour before being energized
    • Quiet fan cooling
    • Fixture is designed for continuous operation up to 104° F (40° C) ambient temperature, and requires free flow of air around fixture housing
DMX to RJ45 Data Accessory Kit
ETC/Elec Theatre Controls 7067K1001 DMX to RJ45 Data Accessory Kit
The 7067K1001 DMX to RJ45 Data Accessory Kit from ETC is designed for use with ETC's Source 4WRD and ColorSource fixtures. Well suited for adapting a run of RJ45 fixtures to an existing 5-pin infrastructure, this kit includes two RJ45 to ...
RJ45 DMX Terminator
ETC/Elec Theatre Controls N4086 RJ45 DMX Terminator
The N4086 from ETC is an RJ45 DMX terminator.
RJ45 to Female 5-Pin XLR adapter
ETC/Elec Theatre Controls W6538 RJ45 to Female 5-Pin XLR adapter
The W6538 from ETC is an RJ45 to 5-pin XLR female adapter.
RJ45 to Male 5-Pin XLR adapter
ETC/Elec Theatre Controls W6539 RJ45 to Male 5-Pin XLR adapter
The W6539 from ETC is an RJ45 to 5-pin XLR male adapter.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM