DPA Microphones VO-4099-A
4099A Instrument Microphone Stereo Kit for Accordion

OUR PART #  VO-4099-A


The DPA Microphones d:vote™ VO4099A Stereo Microphone System for Accordion is a solution that makes it easy to achieve a high level of isolation on stage. The solution also provides clean and transparent stereo sound quality with realistic dynamics. It is a complete system, which includes a pair of d:vote™ Instrument Microphones selected on sensitivity within +/- 1.5 dB. The mic clips can be attached permanently to the instrument using screws.

The d:vote™ Instrument Microphone series is truly a musician’s mic without equal. This series allows you to achieve the purest reproduction of your instrument. The mics feature supercardioid polar patterns for superior gain-before-feedback. They offer extremely natural sound and are fully capable of handling the accordion’s dynamic range.

Known for their discreet size and elegance, these mics feature a lightweight design. Yet, d:vote™ Instrument Microphones are also rugged. The versatile gooseneck provides stable and repeatable positioning. The mics can easily be unclipped from the mount and moved to a new holder on another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

DPA Microphones d:vote VO4099A Features:

  • Superior gain before feedback
  • Flexible and easy one-hand mounting
  • Gentle yet secure adhesion to instrument
  • Compact, discreet size
  • Detachable cable and versatile gooseneck extender
  • Flexible adapter system fits most professional wireless systems

DPA Microphones d:vote VO4099A Specifications:

  • Directional pattern: Supercardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, +/- 2 dB, at 20 cm (7.9 in): 80 Hz -15 kHz with 2 dB soft boost at 10-12 kHz
  • Sensitivity, nominal, +/- 3 dB at 1 kHz: 6 mV/Pa; -44dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 23 dB(A) re.20 µPa (max. 26 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 71 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dBSPL peak
  • Dynamic range: Typ. 100 dB
  • Max. SPL, peak before clipping: 142 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm. FromDAD4099/DAD6001-BC: 100 Ohm
  • Cable drive capability: Up to 300 m (984 ft) withDAD4099 or DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD4099 or DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD4099 or DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Black
  • Weight: 46 g (1.62 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 45 mm (1.8 in)
  • Cable length: 1.8 m (5.9 ft)
  • Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
  • Polarity: +V at MicroDot pin for positive soundpressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Gooseneck length: 140 mm (5.5 in)
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
Stand Mount
DPA Microphones SM4099 Stand Mount
DPA Microphones SM4099 is a stand mount to easily and quickly connect a a d:vote™ 4099 Instrument Microphone to a microphone stand. The mic can be easily unclipped and repositioned or moved to another mic stand (or instrument with the ...
Sabine SW70-T Adapter  (for low DC microphones)
DPA Microphones DAD3053 Sabine SW70-T Adapter (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot to TA-4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Clamp Mount for d:vote 4099 Instrument Microphones
DPA Microphones CM4099 Clamp Mount for d:vote 4099 Instrument Microphones
DPA's CM4099 clamp mount easily and quickly connects a DPA d:vote™ 4099 Instrument Microphone to many types of instruments, such as saxophones and brass instruments. The mounting mechanism makes it easy to move the mic between ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shock Mount Replacement Kit for d:vote 4099
DPA Microphones DUZ0002 Shock Mount Replacement Kit for d:vote 4099
DPA's DUZ0002 is a Shock Mount Replacement Kit designed for their d:vote™ 4099 Instrument Microphone.
Usually ships in 7-14 business days.
Need it sooner? Call us!

DPA Microphones VO-4099-A
4099A Instrument Microphone Stereo Kit for Accordion

OUR PART #  VO-4099-A

Product Information:

The DPA Microphones d:vote™ VO4099A Stereo Microphone System for Accordion is a solution that makes it easy to achieve a high level of isolation on stage. The solution also provides clean and transparent stereo sound quality with realistic dynamics. It is a complete system, which includes a pair of d:vote™ Instrument Microphones selected on sensitivity within +/- 1.5 dB. The mic clips can be attached permanently to the instrument using screws.

The d:vote™ Instrument Microphone series is truly a musician’s mic without equal. This series allows you to achieve the purest reproduction of your instrument. The mics feature supercardioid polar patterns for superior gain-before-feedback. They offer extremely natural sound and are fully capable of handling the accordion’s dynamic range.

Known for their discreet size and elegance, these mics feature a lightweight design. Yet, d:vote™ Instrument Microphones are also rugged. The versatile gooseneck provides stable and repeatable positioning. The mics can easily be unclipped from the mount and moved to a new holder on another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

DPA Microphones d:vote VO4099A Features:

  • Superior gain before feedback
  • Flexible and easy one-hand mounting
  • Gentle yet secure adhesion to instrument
  • Compact, discreet size
  • Detachable cable and versatile gooseneck extender
  • Flexible adapter system fits most professional wireless systems

DPA Microphones d:vote VO4099A Specifications:

  • Directional pattern: Supercardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, +/- 2 dB, at 20 cm (7.9 in): 80 Hz -15 kHz with 2 dB soft boost at 10-12 kHz
  • Sensitivity, nominal, +/- 3 dB at 1 kHz: 6 mV/Pa; -44dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 23 dB(A) re.20 µPa (max. 26 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 71 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dBSPL peak
  • Dynamic range: Typ. 100 dB
  • Max. SPL, peak before clipping: 142 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm. FromDAD4099/DAD6001-BC: 100 Ohm
  • Cable drive capability: Up to 300 m (984 ft) withDAD4099 or DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD4099 or DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD4099 or DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Black
  • Weight: 46 g (1.62 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 45 mm (1.8 in)
  • Cable length: 1.8 m (5.9 ft)
  • Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
  • Polarity: +V at MicroDot pin for positive soundpressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Gooseneck length: 140 mm (5.5 in)
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
Stand Mount
DPA Microphones SM4099 Stand Mount
DPA Microphones SM4099 is a stand mount to easily and quickly connect a a d:vote™ 4099 Instrument Microphone to a microphone stand. The mic can be easily unclipped and repositioned or moved to another mic stand (or instrument with the ...
Sabine SW70-T Adapter  (for low DC microphones)
DPA Microphones DAD3053 Sabine SW70-T Adapter (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot to TA-4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Clamp Mount for d:vote 4099 Instrument Microphones
DPA Microphones CM4099 Clamp Mount for d:vote 4099 Instrument Microphones
DPA's CM4099 clamp mount easily and quickly connects a DPA d:vote™ 4099 Instrument Microphone to many types of instruments, such as saxophones and brass instruments. The mounting mechanism makes it easy to move the mic between ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shock Mount Replacement Kit for d:vote 4099
DPA Microphones DUZ0002 Shock Mount Replacement Kit for d:vote 4099
DPA's DUZ0002 is a Shock Mount Replacement Kit designed for their d:vote™ 4099 Instrument Microphone.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.