DPA Microphones SCO61B10-N53
d:Screet Necklace Microphone with TA4F Termination

OUR PART #  SCO61B10-N53


The DPA Microphones SCO61B10-N53 is a  d:screet™ necklace microphone with TA4F mini XLR termination and 53 cm necklace length.

Sometimes convenient mounting and consistent output are the primary requirements. In these cases, the d:screet™ Necklace 4061 Microphone is the right solution. The mic features the legendary d:screet™ 4061 Miniature Omnidirectional Capsule in a soft rubber necklace.

This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.

DPA Microphones SCO61B10-N53 Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones SCO61B10-N53 Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ±2 dB: High boost grid: 20 Hz - 20kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dBre. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re.20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dBSPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm. FromDAD6001: 100 Ohm
  • Cable drive capability: Up to 300 m (984 ft) withDAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Black
  • Weight: 17 g (0.04 oz) incl. Cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable color: Black
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressureproduces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLRadapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
Pack of 5 Black High Boost Miniature Grids
DPA Microphones DUA6002 Pack of 5 Black High Boost Miniature Grids
The DUA6002 is a kit of 5 black protection grids for the Miniature Microphones. When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

DPA Microphones SCO61B10-N53
d:Screet Necklace Microphone with TA4F Termination

OUR PART #  SCO61B10-N53

Product Information:

The DPA Microphones SCO61B10-N53 is a  d:screet™ necklace microphone with TA4F mini XLR termination and 53 cm necklace length.

Sometimes convenient mounting and consistent output are the primary requirements. In these cases, the d:screet™ Necklace 4061 Microphone is the right solution. The mic features the legendary d:screet™ 4061 Miniature Omnidirectional Capsule in a soft rubber necklace.

This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.

DPA Microphones SCO61B10-N53 Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones SCO61B10-N53 Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ±2 dB: High boost grid: 20 Hz - 20kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dBre. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re.20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dBSPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm. FromDAD6001: 100 Ohm
  • Cable drive capability: Up to 300 m (984 ft) withDAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Black
  • Weight: 17 g (0.04 oz) incl. Cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable color: Black
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressureproduces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLRadapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
Pack of 5 Black High Boost Miniature Grids
DPA Microphones DUA6002 Pack of 5 Black High Boost Miniature Grids
The DUA6002 is a kit of 5 black protection grids for the Miniature Microphones. When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM