Radio Design Labs EZ-VM12
VGA/XGA Distribution Amplifier - 1 x 2

OUR PART #  EZ-VM12


The Radio Design Labs EZ-VM12 is a high-resolution computer video distribution amplifier with two outputs. The input has an associated front-panel BIT ID switch to assure compatibility with various computers. The two outputs are driven by video line amplifiers that provide flat, wideband response. The EZ-VM12 is used in houses of worship, restaurants, clubs, meeting rooms, class rooms, conference rooms, stores and in commercial A/V systems.

Radio Design Labs EZ-VM12 Features:

  • Input and Two Outputs on HD15 Female Connectors
  • Wide RGB Bandwidth > 360 MHz Loaded
  • High Resolution Compatibility VGA through QXGA
  • Reliable Full-Size Front-Panel Switch for ID Bit Selection
  • NORM ID BIT Connects LOCAL MONITOR and INPUT ID
  • DC RGB Coupling, Output Polarity & Offset Follow Input
  • HD15 Input Cable Included - 36", 91.44 cm long

Radio Design Labs EZ-VM12 Specifications:

  • Input: VGA - QXGA RGBHV or RGB with combined sync
  • Outputs (2): LOCAL MONITOR (1, ID bit pass-thru to INPUT), MONITOR (1)
  • Gain: Unity
  • Video bandwidth: > 360 MHz
  • Video impedance: 75 Ohm (Input and output)
  • Sync (HV) input: 500 Ohm TTL 0.7 V to 5 V p-p
  • Sync (HV) output: 5V TTL
  • Sync (HV) Propogation delay: < 4 nS typ.
  • Sync (HV) Rise time: < 4 nS typ.
  • Sync (combined): Output follows input
  • Bit Control: Switch-selectable (Pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
  • 24 Vdc power supply current: 50 mA (idle), 60 mA(max.)
  • Case dimensions (WxD): 5.75" x 3" (14.6 x 7.6 cm)
  • Mounting size: 1/3 rack width
  • Package Type: Cardboard Box
  • Package Dimensions: 9.5" x 7" x 2.25"
  • Shipping Weight: 1.26 lbs.
  • WEEE weight: 0.87 lbs.
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths. Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet
Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Radio Design Labs EZ-VM12
VGA/XGA Distribution Amplifier - 1 x 2

OUR PART #  EZ-VM12

Product Information:

The Radio Design Labs EZ-VM12 is a high-resolution computer video distribution amplifier with two outputs. The input has an associated front-panel BIT ID switch to assure compatibility with various computers. The two outputs are driven by video line amplifiers that provide flat, wideband response. The EZ-VM12 is used in houses of worship, restaurants, clubs, meeting rooms, class rooms, conference rooms, stores and in commercial A/V systems.

Radio Design Labs EZ-VM12 Features:

  • Input and Two Outputs on HD15 Female Connectors
  • Wide RGB Bandwidth > 360 MHz Loaded
  • High Resolution Compatibility VGA through QXGA
  • Reliable Full-Size Front-Panel Switch for ID Bit Selection
  • NORM ID BIT Connects LOCAL MONITOR and INPUT ID
  • DC RGB Coupling, Output Polarity & Offset Follow Input
  • HD15 Input Cable Included - 36", 91.44 cm long

Radio Design Labs EZ-VM12 Specifications:

  • Input: VGA - QXGA RGBHV or RGB with combined sync
  • Outputs (2): LOCAL MONITOR (1, ID bit pass-thru to INPUT), MONITOR (1)
  • Gain: Unity
  • Video bandwidth: > 360 MHz
  • Video impedance: 75 Ohm (Input and output)
  • Sync (HV) input: 500 Ohm TTL 0.7 V to 5 V p-p
  • Sync (HV) output: 5V TTL
  • Sync (HV) Propogation delay: < 4 nS typ.
  • Sync (HV) Rise time: < 4 nS typ.
  • Sync (combined): Output follows input
  • Bit Control: Switch-selectable (Pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
  • 24 Vdc power supply current: 50 mA (idle), 60 mA(max.)
  • Case dimensions (WxD): 5.75" x 3" (14.6 x 7.6 cm)
  • Mounting size: 1/3 rack width
  • Package Type: Cardboard Box
  • Package Dimensions: 9.5" x 7" x 2.25"
  • Shipping Weight: 1.26 lbs.
  • WEEE weight: 0.87 lbs.
Surface Mount Bezel 1/3 Rack
Radio Design Labs EZ-SMB2 Surface Mount Bezel 1/3 Rack
Surface mount bezel for 1/3 rack width EZ products.
Under Counter Bracket
Radio Design Labs EZ-UCB2 Under Counter Bracket
The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths. Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to ...
Component Chasis, 6 x 1/6 RU
Radio Design Labs EZ-CC6 Component Chasis, 6 x 1/6 RU
Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet
Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter
Radio Design Labs EZ-RA6 Rack Adapter
Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Chassis 1/3 Rack
Radio Design Labs EZ-DC2 Desktop Chassis 1/3 Rack
Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
Usually ships in 7-14 business days.
Need it sooner? Call us!
1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
Radio Design Labs EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6
RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Filler Panel, 1/6RU
Radio Design Labs EZ-FP1 Filler Panel, 1/6RU
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.