Gentner RX-1a
Single Channel Receiver

OUR PART #  910-402-002


The Gentner RX-1a Single Channel Receiver operates in the 72-76 MHz auditory assitance band. The RX-1a is continuously turnable by a concealed control over over that band. The audio frequency response is 100Hz-10KHz.

The RX-1a is housed in a high-strength, plastic case with an integral pocket clip. The only exposed controls are the on/off and volume controls. There is a 1/8" headphone jack output.

The receiver provides an audio ourput of 140mW into a 32O load. The receiver runs on two AA batteries and has a built-in charger.

Gentner RX-1a Features:

  • Wide area FM system works outdoors or in bright light with no line of sight restrictions
  • Extra-long battery life (60+ hours), uses two AA batteries
  • Elegant, simple design makes it easy to use by virtually anyone. Large On/Off/Volume control, Power LED indicating power ison and batteries are charged
  • High power output stage (140mW) provides superior audio quality
  • Convenient and easy to carry, built in belt/pocketclip, wrist strap and single earbud included
  • Field tunable to all FCC approved assistive listening channels. No factory service or additional parts required to change channels

Gentner RX-1a Specifications:

  • Dimensions (LxDxH): 2.63" x 0.75" x 3.50" (6.68 x1.91 x 8.89 cm)
  • Weight: 4 oz (113.4 g) (dry)
  • Type: FM, medium bandwidth (50kHz)
  • Audio Frequency Range: 100Hz–10kHz
  • Audio Output Level: 140mW into 32O
  • Signal to Noise Ratio: >60dB
  • Distortion: <2%
  • RF Frequency Range: Tunable, 72–76MHz
  • Sensitivity: 0.6uV typical, 1uV max for 12dB SINAD
  • Controls: On/Off/Volume, Channel Tuning (hidden)
  • Earphone Jack: Standard 3.5 mm mono
  • Power Requirements: 2 AA batteries
  • Battery Life (Typical): 60 hours with alkaline types

Gentner RX-1a
Single Channel Receiver

OUR PART #  910-402-002

Product Information:

The Gentner RX-1a Single Channel Receiver operates in the 72-76 MHz auditory assitance band. The RX-1a is continuously turnable by a concealed control over over that band. The audio frequency response is 100Hz-10KHz.

The RX-1a is housed in a high-strength, plastic case with an integral pocket clip. The only exposed controls are the on/off and volume controls. There is a 1/8" headphone jack output.

The receiver provides an audio ourput of 140mW into a 32O load. The receiver runs on two AA batteries and has a built-in charger.

Gentner RX-1a Features:

  • Wide area FM system works outdoors or in bright light with no line of sight restrictions
  • Extra-long battery life (60+ hours), uses two AA batteries
  • Elegant, simple design makes it easy to use by virtually anyone. Large On/Off/Volume control, Power LED indicating power ison and batteries are charged
  • High power output stage (140mW) provides superior audio quality
  • Convenient and easy to carry, built in belt/pocketclip, wrist strap and single earbud included
  • Field tunable to all FCC approved assistive listening channels. No factory service or additional parts required to change channels

Gentner RX-1a Specifications:

  • Dimensions (LxDxH): 2.63" x 0.75" x 3.50" (6.68 x1.91 x 8.89 cm)
  • Weight: 4 oz (113.4 g) (dry)
  • Type: FM, medium bandwidth (50kHz)
  • Audio Frequency Range: 100Hz–10kHz
  • Audio Output Level: 140mW into 32O
  • Signal to Noise Ratio: >60dB
  • Distortion: <2%
  • RF Frequency Range: Tunable, 72–76MHz
  • Sensitivity: 0.6uV typical, 1uV max for 12dB SINAD
  • Controls: On/Off/Volume, Channel Tuning (hidden)
  • Earphone Jack: Standard 3.5 mm mono
  • Power Requirements: 2 AA batteries
  • Battery Life (Typical): 60 hours with alkaline types
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM