Turbosound TSB-110-WH
10" Band Pass Subwoofer for Installation Applications, White

OUR PART #  TSB-110WH


The TURBOSOUND TSB-110-WH is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship. It comprises a dual voice coil 10" LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.

The TSB-110-WH provides sub-bass support for several Turbosound enclosures. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single sub-bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110-WH has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to be permanently installed.

The TSB-110-WH provides sub-bass support for several Turbosound enclosures. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single sub-bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110-WH has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to be permanently installed.

TURBOSOUND TSB-110-WH Features:

  • Compact enclosure
  • 350 watt power rating
  • Dual voice coil speaker

TURBOSOUND TSB-110-WH Specifications:

  • Components: 1 x 254mm (10”) dual voice coil LF driver
  • Frequency Range: 45Hz to 180Hz @±4dB
  • Power Handling: 300 watts r.m.s., 600 watts program
  • Sensitivity: 95dB SPL, 1 watt @ 1 metre
  • Max. SPL: 120dB continuous, 126dB peak
  • Crossover: Built in high-pass crossover network at150Hz
  • Impedance: 2 x 4 ohms nominal
  • Construction: 15mm (5/8”) birch plywood, finished in black textured paint
  • Connectors: 2 x input L&R spring-loaded push terminals; 2x NL4MP; 2x output spring-loaded push terminals
  • Rigging: 4 x M10 rigging points
  • Dimensions: 13" H x 23" W x 13" D (330 x 585 x 330 mm)
  • Weight: 36.3 lbs (16.5 kg)

Turbosound TSB-110-WH
10" Band Pass Subwoofer for Installation Applications, White

OUR PART #  TSB-110WH

Product Information:

The TURBOSOUND TSB-110-WH is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship. It comprises a dual voice coil 10" LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.

The TSB-110-WH provides sub-bass support for several Turbosound enclosures. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single sub-bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110-WH has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to be permanently installed.

The TSB-110-WH provides sub-bass support for several Turbosound enclosures. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single sub-bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110-WH has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to be permanently installed.

TURBOSOUND TSB-110-WH Features:

  • Compact enclosure
  • 350 watt power rating
  • Dual voice coil speaker

TURBOSOUND TSB-110-WH Specifications:

  • Components: 1 x 254mm (10”) dual voice coil LF driver
  • Frequency Range: 45Hz to 180Hz @±4dB
  • Power Handling: 300 watts r.m.s., 600 watts program
  • Sensitivity: 95dB SPL, 1 watt @ 1 metre
  • Max. SPL: 120dB continuous, 126dB peak
  • Crossover: Built in high-pass crossover network at150Hz
  • Impedance: 2 x 4 ohms nominal
  • Construction: 15mm (5/8”) birch plywood, finished in black textured paint
  • Connectors: 2 x input L&R spring-loaded push terminals; 2x NL4MP; 2x output spring-loaded push terminals
  • Rigging: 4 x M10 rigging points
  • Dimensions: 13" H x 23" W x 13" D (330 x 585 x 330 mm)
  • Weight: 36.3 lbs (16.5 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM