Enttec 9VL4-1
Roll of High-Quality RGB LED Tape, Sold by the Meter

OUR PART #  9VL4-1-BY-THE-METER


Enttec's 9VL4-1, part of their 9VL4 family, is a roll of high-quality RGB LED tape sold by the meter. Designed especially for use with Enttec's 8E series aluminum LED Extrusions (sold separately, as well as power supply - consult your Sales Pro for more details).

Note: Extrusions & power supplies shown in diagram above are sold separately

Enttec 9VL4-1 Features:

  • 12mm pitch
  • Standard size (WxHxL): approx. 0.39" x 0.16" x 197" (10 x 4 x 5000mm)
  • Customized Length available
  • 60pcs of RGB LEDs per meter
  • High light output
  • High-quality LEDs for maximum color vibrancy and longevity
  • Dimmable by ENTTEC CV Driver or DIN-LED4PX
  • Can be cut to a smaller length
    • Minimum cut length: 100mm
  • Can be joined together
  • Input and output connections (loose cable)
  • Constant Voltage control
  • IP20 Indoor use only (available separately in IP65 - consult your Sales Pro for more details)

Enttec 9VL4-1 Specifications:

  • Input Voltage (VCC): +24 VDC
  • Consumption (W/m)*:
    • Red: 4.45
    • Green: 3.31
    • Blue: 3.12
      *Please Note: Operating the strip without a proper heat-sink can permanently damage the electronics and void the warranty. Various heatsink extrusions can be purchased separately.
  • RGB Luminance (lm/m):
    • Red: 66
    • Green: 179
    • Blue: 42.6
  • Beam Angle: 120°
  • Net Weight (Grams): 150g/5m
  • Operation Temperature: 14° to 122° F (-10° to 50° C)
  • Connection (In/Out): Loose Cable

Due to continuous improvements and innovations of all ENTTEC products, specifications and features are subject to change without notice.

Enttec 9VL4-1
Roll of High-Quality RGB LED Tape, Sold by the Meter

OUR PART #  9VL4-1-BY-THE-METER

Product Information:

Enttec's 9VL4-1, part of their 9VL4 family, is a roll of high-quality RGB LED tape sold by the meter. Designed especially for use with Enttec's 8E series aluminum LED Extrusions (sold separately, as well as power supply - consult your Sales Pro for more details).

Note: Extrusions & power supplies shown in diagram above are sold separately

Enttec 9VL4-1 Features:

  • 12mm pitch
  • Standard size (WxHxL): approx. 0.39" x 0.16" x 197" (10 x 4 x 5000mm)
  • Customized Length available
  • 60pcs of RGB LEDs per meter
  • High light output
  • High-quality LEDs for maximum color vibrancy and longevity
  • Dimmable by ENTTEC CV Driver or DIN-LED4PX
  • Can be cut to a smaller length
    • Minimum cut length: 100mm
  • Can be joined together
  • Input and output connections (loose cable)
  • Constant Voltage control
  • IP20 Indoor use only (available separately in IP65 - consult your Sales Pro for more details)

Enttec 9VL4-1 Specifications:

  • Input Voltage (VCC): +24 VDC
  • Consumption (W/m)*:
    • Red: 4.45
    • Green: 3.31
    • Blue: 3.12
      *Please Note: Operating the strip without a proper heat-sink can permanently damage the electronics and void the warranty. Various heatsink extrusions can be purchased separately.
  • RGB Luminance (lm/m):
    • Red: 66
    • Green: 179
    • Blue: 42.6
  • Beam Angle: 120°
  • Net Weight (Grams): 150g/5m
  • Operation Temperature: 14° to 122° F (-10° to 50° C)
  • Connection (In/Out): Loose Cable

Due to continuous improvements and innovations of all ENTTEC products, specifications and features are subject to change without notice.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.