K-Array KMT18 Mark I
Lightweight High-Power 18" Subwoofer

OUR PART #  KMT18-I


The KMT18 puts out 2x1000W at 8 Ohm with its Class D amplifier and comes equipped with multiple analog and digital outputs to connect a wide array of passive speakers including mid-high models or additional passive subwoofers. The onboard DSP includes up to 40 programmable presets for optimal performance.

K-Array KMT181 Features:

  • Unique performance-to-size ratio
  • Fitted with integral handles and castors
  • Direct radiating, long excursion 18” driver
  • Analog and digital AES-EBU inputs
  • RS485 and USB connectivity for remote control
  • High power 127 dB continuous - 133 dB peak
  • Direct radiating, 18" long-excursion driver
  • Fitted with integral handles and castors
  • Ultra-fast setup and dismantling system
  • RS485 and USB connectivity for remote control
  • Analog and digital AES-EBU inputs

K-Array KMT181 Specifications:

  • ACOUSTICS
    • Speaker Power handling: 800 W
    • Max power: 1400 W
    • Impedance: 8 Ohm
    • Frequency range: 30 Hz - 150 Hz ± 3dB (preset relating)
    • SPL 1W / 1mt: 99 dB
    • Maximum SPL: 130 dB continuous - 136 dB peak
  • COVERAGE: Omni
  • CROSSOVER
    • Type: DSP controlled
    • Frequency: 150 Hz (preset dependent)
  • TRANDUCERS
    • Full range: 1 x 18” Neodymium speakers with 3” voice coil
  • AUDIO INPUT
    • Analog Connectors: 2 male + 2 female 3-pin balanced XLR
    • Digital Connectors: 1 male + 1 female 3-pin XLR
  • AUDIO POWERED OUTPUT
    • Connector: Female Speakon
    • Wiring: Pin1+= CH1+  Pin1= CH1- Pin2+= N.C. Pin2= N.C.
  • REMOTE CONTROL INPUT
    • Connectors: 1 male + 1 female XLR parallel  / 1 USB B Jack serial converter
  • POWER INPUT
    • Connectors: 2 x PowerCon IN/OUT
  • AMPLIFIERS
    • Type: 1 modules class D - DSP controlled
    • Subwoofer power: 1000 Watt @ 8 Ohm
    • Speaker power output: 1000 Watt @ 8 Ohm
    • Speaker power output: Dynamic limiter, over current, over temp, short circuits
  • AC POWER
    • Nominal power requirements: 100 - 240 Vac ± 10% 50-60 Hz
    • Operating range: 85 – 265 Vac (auto-range)
  • CONSUMPTION
    • 1/8 rated power (pink noise) @ 8 Ohm: 300 W
  • PHYSICAL
    • Dimensions: 18.3“ x 18.3” x 23.3“ (46.5 cm x 46.5 cm x 59.2 cm)
    • Weight: 60.8 lbs (27.6 kg)
USB-RS485 Interface for K-Array
K-Array K-USB USB-RS485 Interface for K-Array
USB-RS485 interface for K-Array systems. 

Usually ships in 7-14 business days.
Need it sooner? Call us!

K-Array KMT18 Mark I
Lightweight High-Power 18" Subwoofer

OUR PART #  KMT18-I

Product Information:

The KMT18 puts out 2x1000W at 8 Ohm with its Class D amplifier and comes equipped with multiple analog and digital outputs to connect a wide array of passive speakers including mid-high models or additional passive subwoofers. The onboard DSP includes up to 40 programmable presets for optimal performance.

K-Array KMT181 Features:

  • Unique performance-to-size ratio
  • Fitted with integral handles and castors
  • Direct radiating, long excursion 18” driver
  • Analog and digital AES-EBU inputs
  • RS485 and USB connectivity for remote control
  • High power 127 dB continuous - 133 dB peak
  • Direct radiating, 18" long-excursion driver
  • Fitted with integral handles and castors
  • Ultra-fast setup and dismantling system
  • RS485 and USB connectivity for remote control
  • Analog and digital AES-EBU inputs

K-Array KMT181 Specifications:

  • ACOUSTICS
    • Speaker Power handling: 800 W
    • Max power: 1400 W
    • Impedance: 8 Ohm
    • Frequency range: 30 Hz - 150 Hz ± 3dB (preset relating)
    • SPL 1W / 1mt: 99 dB
    • Maximum SPL: 130 dB continuous - 136 dB peak
  • COVERAGE: Omni
  • CROSSOVER
    • Type: DSP controlled
    • Frequency: 150 Hz (preset dependent)
  • TRANDUCERS
    • Full range: 1 x 18” Neodymium speakers with 3” voice coil
  • AUDIO INPUT
    • Analog Connectors: 2 male + 2 female 3-pin balanced XLR
    • Digital Connectors: 1 male + 1 female 3-pin XLR
  • AUDIO POWERED OUTPUT
    • Connector: Female Speakon
    • Wiring: Pin1+= CH1+  Pin1= CH1- Pin2+= N.C. Pin2= N.C.
  • REMOTE CONTROL INPUT
    • Connectors: 1 male + 1 female XLR parallel  / 1 USB B Jack serial converter
  • POWER INPUT
    • Connectors: 2 x PowerCon IN/OUT
  • AMPLIFIERS
    • Type: 1 modules class D - DSP controlled
    • Subwoofer power: 1000 Watt @ 8 Ohm
    • Speaker power output: 1000 Watt @ 8 Ohm
    • Speaker power output: Dynamic limiter, over current, over temp, short circuits
  • AC POWER
    • Nominal power requirements: 100 - 240 Vac ± 10% 50-60 Hz
    • Operating range: 85 – 265 Vac (auto-range)
  • CONSUMPTION
    • 1/8 rated power (pink noise) @ 8 Ohm: 300 W
  • PHYSICAL
    • Dimensions: 18.3“ x 18.3” x 23.3“ (46.5 cm x 46.5 cm x 59.2 cm)
    • Weight: 60.8 lbs (27.6 kg)
USB-RS485 Interface for K-Array
K-Array K-USB USB-RS485 Interface for K-Array
USB-RS485 interface for K-Array systems. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM