DPA Microphones MMP-F30 [RESTOCK ITEM]
30cm Modular Podium Boom Arm with Gooseneck Top and Microphone Preamplifier for d:dictate Series

OUR PART #  MMP-F30-RST-01


A 30 cm long modular podium boom arm with gooseneck top and microphone preamplifier, DPA Microphones' MMP-F30 is engineered for use with any of DPA's d:dictate™ modular microphone capsules. The MMP-F30 comes with state-of-the-art preamplifier design, and features excellent radio frequency rejection thanks to the DPA designed impedance balancing with active drive.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

DPA Microphones MMP-F30 Features:

  • Maximum speech intelligibility regardless of acoustical environment
  • High-gain before feedback leading to fewer speaker placement issues
  • Rejection of mobile phone interference
  • Consistent sound from every microphone, every time

DPA Microphones MMP-F30 Specifications:

  • Output Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: -phase
  • Low-Cut Frequency, -3 dB: 15 Hz
  • Noise with Shorted Input, A-weighted: 0.6 µV
  • Output Voltage, RMS: 2.2V
  • Output Voltage, Peak: 3.1V
  • Type of Electronic Circuit: Active
  • THD @ 1VRMS, 1kHz: < 0.2 %
  • Dynamic Range: 131 dB
  • Output Impedance: 100 Ohms
  • Minimum Load Impedance: 2 kOhms
  • Current Consumption: 3.5 mA
  • Output Balance Principle: Impedance balancing
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power Supply (for full specifications): 48 V Phantom power (+/- 4 V)
  • Cable Drive Capability: 328ft (100m)
  • Color: Matte Black
  • Diameter: 0.75" (19 mm)
  • Length: 30 cm
  • Temperature Range: -40 °F to 113 °F (-40 °C to 45 °C)
  • Relative Humidity (RH): Up to 90%

DPA Microphones MMP-F30 [RESTOCK ITEM]
30cm Modular Podium Boom Arm with Gooseneck Top and Microphone Preamplifier for d:dictate Series

OUR PART #  MMP-F30-RST-01

Product Information:

A 30 cm long modular podium boom arm with gooseneck top and microphone preamplifier, DPA Microphones' MMP-F30 is engineered for use with any of DPA's d:dictate™ modular microphone capsules. The MMP-F30 comes with state-of-the-art preamplifier design, and features excellent radio frequency rejection thanks to the DPA designed impedance balancing with active drive.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

DPA Microphones MMP-F30 Features:

  • Maximum speech intelligibility regardless of acoustical environment
  • High-gain before feedback leading to fewer speaker placement issues
  • Rejection of mobile phone interference
  • Consistent sound from every microphone, every time

DPA Microphones MMP-F30 Specifications:

  • Output Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: -phase
  • Low-Cut Frequency, -3 dB: 15 Hz
  • Noise with Shorted Input, A-weighted: 0.6 µV
  • Output Voltage, RMS: 2.2V
  • Output Voltage, Peak: 3.1V
  • Type of Electronic Circuit: Active
  • THD @ 1VRMS, 1kHz: < 0.2 %
  • Dynamic Range: 131 dB
  • Output Impedance: 100 Ohms
  • Minimum Load Impedance: 2 kOhms
  • Current Consumption: 3.5 mA
  • Output Balance Principle: Impedance balancing
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power Supply (for full specifications): 48 V Phantom power (+/- 4 V)
  • Cable Drive Capability: 328ft (100m)
  • Color: Matte Black
  • Diameter: 0.75" (19 mm)
  • Length: 30 cm
  • Temperature Range: -40 °F to 113 °F (-40 °C to 45 °C)
  • Relative Humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM