Bogen Communications S810T725
8-Inch Cone Loudspeaker with XFMR, with 10 oz Magnet

OUR PART #  S810T725


The Bogen Models S86 and S810 are 8" unmounted cone-type loudspeakers with 6- or 10-ounce magnets,with or without speaker transformers. Models with transformers work with both 70V and 25V amplifier outputs.

Bogen Communications S810T725 Features:

  • 7 watts and 15 watts power handling capacity
  • 8" cone speaker for excellent audio quality
  • Available with transformer mounted and wired (T725 models)
  • Easy to install in wall baffles or ceiling grilles

Bogen Communications S810T725 Specifications:

  • Dimensions: 8" Dia x 3-1/4" D
  • Magnet Weight: 10 oz.
  • Frequency Response: 70 Hz-15 kHz
  • Sensitivity (1W/ 4 ft.): 96 dBspl
  • Power/Taps (in Watts): 4, 2, 1, 1/2, 1/4, 1/8W @ 25& 70V
  • Connections: Wire
  • Shipping Weight (16/Carton): 50 lb. / crtn
Tile Bridge
Bogen Communications TB8 Tile Bridge
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in ...
35W Single Gang Attenuator with Override
Bogen Communications ATP35 35W Single Gang Attenuator with Override
Bogen's ATP-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings.  A bypass function overrides the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
10W Single Gang Attenuator with Bypass
Bogen Communications ATP10 10W Single Gang Attenuator with Bypass
Bogen's ATP-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings.  A bypass function overrides the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
30W Dual-Gang Wall-Mount Attenuator for 25V/70V Speaker Line
Bogen Communications AT-35A 30W Dual-Gang Wall-Mount Attenuator for 25V/70V Speaker Line
Bogen's AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
10W Attenuator
Bogen Communications AT10A 10W Attenuator
The AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Ring for Bogen Ceiling Grilles
Bogen Communications MR8 Mounting Ring for Bogen Ceiling Grilles
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles, for installations where the RE84 is not used.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Round Recessed Enclosure
Bogen Communications RE84 Round Recessed Enclosure
The RE84 is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Bogen Communications S810T725
8-Inch Cone Loudspeaker with XFMR, with 10 oz Magnet

OUR PART #  S810T725

Product Information:

The Bogen Models S86 and S810 are 8" unmounted cone-type loudspeakers with 6- or 10-ounce magnets,with or without speaker transformers. Models with transformers work with both 70V and 25V amplifier outputs.

Bogen Communications S810T725 Features:

  • 7 watts and 15 watts power handling capacity
  • 8" cone speaker for excellent audio quality
  • Available with transformer mounted and wired (T725 models)
  • Easy to install in wall baffles or ceiling grilles

Bogen Communications S810T725 Specifications:

  • Dimensions: 8" Dia x 3-1/4" D
  • Magnet Weight: 10 oz.
  • Frequency Response: 70 Hz-15 kHz
  • Sensitivity (1W/ 4 ft.): 96 dBspl
  • Power/Taps (in Watts): 4, 2, 1, 1/2, 1/4, 1/8W @ 25& 70V
  • Connections: Wire
  • Shipping Weight (16/Carton): 50 lb. / crtn
Tile Bridge
Bogen Communications TB8 Tile Bridge
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in ...
35W Single Gang Attenuator with Override
Bogen Communications ATP35 35W Single Gang Attenuator with Override
Bogen's ATP-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings.  A bypass function overrides the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
10W Single Gang Attenuator with Bypass
Bogen Communications ATP10 10W Single Gang Attenuator with Bypass
Bogen's ATP-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings.  A bypass function overrides the ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
30W Dual-Gang Wall-Mount Attenuator for 25V/70V Speaker Line
Bogen Communications AT-35A 30W Dual-Gang Wall-Mount Attenuator for 25V/70V Speaker Line
Bogen's AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
10W Attenuator
Bogen Communications AT10A 10W Attenuator
The AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Ring for Bogen Ceiling Grilles
Bogen Communications MR8 Mounting Ring for Bogen Ceiling Grilles
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles, for installations where the RE84 is not used.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Round Recessed Enclosure
Bogen Communications RE84 Round Recessed Enclosure
The RE84 is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM