Countryman I2HH10XLR-FKIT
Flute Microphone Kit

OUR PART #  I2HH10XLR-FKIT


The Countryman I2 Flute Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman's Flute Mount, an extremely low-profile mount which brings the microphone close for excellent pickup and isolation.

Countryman I2 Flute Microphone Specifications:

  • Frequency Response:
    • Omnidirectional: 20 Hz to 20 kHz
    • Directional: 50 Hz to 20 kHz
  • Overload Sound Level: 150 dB SPL at 1% THD
  • Output Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
  • Equivalent Acoustic Noise:
    • Omnidirectional: 25 dBA
    • Directional: 29 dBA
  • Power Requirements: 6V to 50V Phantom at 4mA. Voltage below 24V wil result in reduced overload SPL.
  • Sensitivity: 1.4 mV/Pascal
  • Dimensions: 5/16" x 5/8" x 5/32" (8mm x 16mm x 4mm) excluding cable strainrelief.

Countryman I2HH10XLR-FKIT
Flute Microphone Kit

OUR PART #  I2HH10XLR-FKIT

Product Information:

The Countryman I2 Flute Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman's Flute Mount, an extremely low-profile mount which brings the microphone close for excellent pickup and isolation.

Countryman I2 Flute Microphone Specifications:

  • Frequency Response:
    • Omnidirectional: 20 Hz to 20 kHz
    • Directional: 50 Hz to 20 kHz
  • Overload Sound Level: 150 dB SPL at 1% THD
  • Output Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
  • Equivalent Acoustic Noise:
    • Omnidirectional: 25 dBA
    • Directional: 29 dBA
  • Power Requirements: 6V to 50V Phantom at 4mA. Voltage below 24V wil result in reduced overload SPL.
  • Sensitivity: 1.4 mV/Pascal
  • Dimensions: 5/16" x 5/8" x 5/32" (8mm x 16mm x 4mm) excluding cable strainrelief.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM