DPA Microphones FIOB34-M
d:fine Single-Ear Omnidirectional Microphone, 3.5 mm Locking Ring, For Sennheiser Wireless Transmitters, Black

OUR PART #  FIOB34-M


The DPA Microphone FIOB34-M is a d:fine single-ear onmidirectional microphone. It has a 3.5 mm locking ring for Sennheiser wireless transmitters.

The d:fine™ Series of headsets has the leading position when it comes to head worn microphones. Combining pristine audio quality with unique and simple mechanical solutions alongside an extensive accessory line.

The d:fine™ Slim Directional Headset Microphone rejects side and background noise while creating higher separation from nearby sound sources. This improves the gain-to-feedback ratio and gives more channel control. Yet natural voice intelligibility is preserved. The mic also has very high SPL capabilities. You can both speak and sing into the mic with no hint of distortion.

Windscreens, a capsule protection cap, a cable clip (to anchor the cable to your clothing) and a color-coded cable clip (offering easy recognition of a specific headset among many) are included.

DPA Microphones FIOB34-M Features:

  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones FIOB34-M Specifications:

  • Polar pattern: omnidirectional
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Dynamic range: Typ. 95 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Connector: MicroDot
  • Color: Black
  • Weight: Microphone boom: 0.8 g (0.03 oz). Earhook:1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Cable length: 1.3 m (4.3 ft)
  • Polarity: +V at MicroDot pin for positive soundpressure (and pin 2 on DAD6001-BC XLR adapter)
  • Electromagnetic compatibility (EMC): Fully compatible
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%

DPA Microphones FIOB34-M
d:fine Single-Ear Omnidirectional Microphone, 3.5 mm Locking Ring, For Sennheiser Wireless Transmitters, Black

OUR PART #  FIOB34-M

Product Information:

The DPA Microphone FIOB34-M is a d:fine single-ear onmidirectional microphone. It has a 3.5 mm locking ring for Sennheiser wireless transmitters.

The d:fine™ Series of headsets has the leading position when it comes to head worn microphones. Combining pristine audio quality with unique and simple mechanical solutions alongside an extensive accessory line.

The d:fine™ Slim Directional Headset Microphone rejects side and background noise while creating higher separation from nearby sound sources. This improves the gain-to-feedback ratio and gives more channel control. Yet natural voice intelligibility is preserved. The mic also has very high SPL capabilities. You can both speak and sing into the mic with no hint of distortion.

Windscreens, a capsule protection cap, a cable clip (to anchor the cable to your clothing) and a color-coded cable clip (offering easy recognition of a specific headset among many) are included.

DPA Microphones FIOB34-M Features:

  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones FIOB34-M Specifications:

  • Polar pattern: omnidirectional
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Dynamic range: Typ. 95 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 Ohm
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Connector: MicroDot
  • Color: Black
  • Weight: Microphone boom: 0.8 g (0.03 oz). Earhook:1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Cable length: 1.3 m (4.3 ft)
  • Polarity: +V at MicroDot pin for positive soundpressure (and pin 2 on DAD6001-BC XLR adapter)
  • Electromagnetic compatibility (EMC): Fully compatible
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM