1-800-828-0509
Hours: Mon–Fri 7:00AM – 7:00PM
Pros Available by phone Mon-Fri 7.00AM - 7.30PM Central
Home » Audio & Sound Equipment » Headphones/Earphones » Headsets, Broadcast, Sportscaster, with Microphone » HME 27
Sennheiser HME 27
Broadcast Headset with Pre-Polarized Condenser Microphone
OUR PART # HME27
 |  |  |
The new Sennheiser HME 27-series invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort. HME 27 are a closed and circumaural earcup design to provide a high passive attenuation but nevertheless unusually lightweight and comfortable over long working hours. Soft circumaural earpads ensure a comfortable fit. The headset is similar to the HMS 26series equipped with the automatically opening two-piece headband, hence no pressure on the sensitive fontanelle. For those users who still prefer a conventional headband, a wide headband padding is included that converts the two-piece headband into a compact single piece.
Sennheiser HME 27 Includes:
- (1) HME 27
- (1) large headband padding
- (1) wind and pop screen
- (1) cable clip
- (1) QuickGuide
- (1) SafetyGuide
- Without connection cable (sold separately)
Sennheiser HME 27 Features:
- Highest wearing comfort due to the lightweightcircumaural design and the splitted headband (no pressure on the sensitivefontanelle)
- Accurate and linear sound reproduction for verydemanding monitoring
- Pre-polarized condenser microphone with cardioiddirectivity for a precise audio reproduction and higher intelligibility inhighest broadcast quality even in noisy environments
- ActiveGard© (on/off switch) for protected hearingagainst noise peaks > 110dB
- Modular concept of different cables and boom arms tooffer highest flexibility
- Cables of the cable 26-II series are compatible
- Swiveling ear cap for single sided listening
- Microphone can be worn either on right or left handside
- Wide headband padding is included that converts the two-piece headband into a compact single piece
Sennheiser HME 27 Specifications:
- Impedance: 64 ohms
- Frequency response (microphone): 40 Hz – 20 kHz
- Transducer principle (Microphone): Pre-polarizedcondenser microphone
- Frequency response (headphones): 8 Hz – 18 kHz
- Microphone: BKE 10-4
- Frequency response: 8 Hz – 18 kHz
- Max. sound pressure level
- ActiveGard™ Limiter off: 128 dB SPL @ 1 kHz
- ActiveGard™ Limiter on: 110 dB SPL @ 1 kHz
- Contact pressure: approx. 3.3 N
- Ear coupling: circumaural
- Pick-up pattern: cardioid
- Microphone sensitivity: 16 mV/Pa @ 1 kHz
- Maximum sound pressure level (passiv): 128 dB SPL @ 1kHz
- ActiveGard™: 110 dB SPL @ 1 kHz
- Distortion: < 0.1% @ 1 kHz, 100 dB SPL
- Transducer principle (headphones): dynamic, closed
- Weight without cable: approx. 240 g
Sennheiser HME 27
Broadcast Headset with Pre-Polarized Condenser Microphone
OUR PART # HME27
Product Information:
Description
The new Sennheiser HME 27-series invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort. HME 27 are a closed and circumaural earcup design to provide a high passive attenuation but nevertheless unusually lightweight and comfortable over long working hours. Soft circumaural earpads ensure a comfortable fit. The headset is similar to the HMS 26series equipped with the automatically opening two-piece headband, hence no pressure on the sensitive fontanelle. For those users who still prefer a conventional headband, a wide headband padding is included that converts the two-piece headband into a compact single piece.
Sennheiser HME 27 Includes:
- (1) HME 27
- (1) large headband padding
- (1) wind and pop screen
- (1) cable clip
- (1) QuickGuide
- (1) SafetyGuide
- Without connection cable (sold separately)
Sennheiser HME 27 Features:
- Highest wearing comfort due to the lightweightcircumaural design and the splitted headband (no pressure on the sensitivefontanelle)
- Accurate and linear sound reproduction for verydemanding monitoring
- Pre-polarized condenser microphone with cardioiddirectivity for a precise audio reproduction and higher intelligibility inhighest broadcast quality even in noisy environments
- ActiveGard© (on/off switch) for protected hearingagainst noise peaks > 110dB
- Modular concept of different cables and boom arms tooffer highest flexibility
- Cables of the cable 26-II series are compatible
- Swiveling ear cap for single sided listening
- Microphone can be worn either on right or left handside
- Wide headband padding is included that converts the two-piece headband into a compact single piece
Sennheiser HME 27 Specifications:
- Impedance: 64 ohms
- Frequency response (microphone): 40 Hz – 20 kHz
- Transducer principle (Microphone): Pre-polarizedcondenser microphone
- Frequency response (headphones): 8 Hz – 18 kHz
- Microphone: BKE 10-4
- Frequency response: 8 Hz – 18 kHz
- Max. sound pressure level
- ActiveGard™ Limiter off: 128 dB SPL @ 1 kHz
- ActiveGard™ Limiter on: 110 dB SPL @ 1 kHz
- Contact pressure: approx. 3.3 N
- Ear coupling: circumaural
- Pick-up pattern: cardioid
- Microphone sensitivity: 16 mV/Pa @ 1 kHz
- Maximum sound pressure level (passiv): 128 dB SPL @ 1kHz
- ActiveGard™: 110 dB SPL @ 1 kHz
- Distortion: < 0.1% @ 1 kHz, 100 dB SPL
- Transducer principle (headphones): dynamic, closed
- Weight without cable: approx. 240 g
