Intelix INT-HD70-RX
HDMI, IR & RS232 Receiver with PoH

OUR PART #  INT-HD70-RX


The Intelix INT-HD70-RX extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010RX HDBaseT chip. The INT-HD70-RX supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 70m, as well as 3D and 4K x 2K (UHD) signals up to 40m. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required.

The INT-HD70 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.

Intelix INT-HD70-RX Includes:

  • Installation Guide
  • Power Supply
  • 3-pin Removable Screw Terminal

Intelix INT-HD70-RX Features:

  • Extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010TX HDBaseT chip
  • 1080p, including HDCP 2.2 and multichannel audio, up to 70m
  • 3D and 4K x 2K (UHD) signals up to 40m
  • Built-in surge protection and diagnostic LEDs
  • Powered at either the TX or RX end, and only one power supply is required
  • The power supply is included; IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately
  • Compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications

Intelix INT-HD70-RX Specifications:

  • Product Line: INT-HD70-RX\
  • Input/Output Connections:
    • HDMI Output: One (1) HDMI Type A Receptacle
    • HDBaseT Port: One (1) 8P8C port (Shielded RJ45)
    • Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
    • RS232 Port: One (1) 3-pin Removable Terminal Block Connector
    • IR Input: One (1) 3.5 mm TRS Receptacle
    • IR Output: One (1) 3.5 mm TRS Receptacle
  • Supported Audio, Video and Control:
    • Video Resolutions:
      • SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
      • VESA: Resolutions up to 1920x1200
      • Color Depth: 24, 30, 36, 48bit
    • Maximum Video Compatibility at 70 m: Deep Color 36/30/24 Bit at 1080p
    • Maximum Video Compatibility at 40 m: 1080p 3D, UHD/30, Deep Color 48 Bit at 1080p
    • Video Compliance: HDMI 1.4 and HDCP 1.4/2.2
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • ARC (Audio Return Channel): No
    • HEC (HDMI Ethernet Channel): No
    • CEC (Consumer Electronics Control): Yes (Pass-through Only)
    • Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
    • Supported IR Carrier Frequencies: 33 to 55 kHz
  • HDBaseT Signal Characteristics:
    • Maximum Distance: 70 m (229 ft)
    • Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
    • Bandwidth: 10.2 Gbps
    • HDBaseT Chipset: VS010RX
  • Chassis and Environmental:
    • Construction: Black Alumininum
    • Dimensions (HxWxD): 0.64" x 4.73" x 3.31" (16.2 mm x 115 mm x 84 mm)
    • Operating Temperature: +32° to +104° F (0° to +40° C)
    • Operating Humidity: 20% to 90%, Non-condensing
    • Storage Temperature: +14° to +140° F (-10° to +60° C)
    • Storage Humidity: 20% to 90%, Non-condensing
  • Power and Regulatory:
    • Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
    • Power Output: 48V DC PoH (Power over HDBaseT)
    • Power over Ethernet (PoE) Compatibility: 802.3af Alternative A
    • Power Consumption: 5 watts
    • ESD Protection: 15kV air, 8kV contact
    • Regulatory: FCC, CE, RoHS
  • Other:
    • Warranty: 2 years
    • Diagnostic Indicators: HDCP, Link, and Power
    • Optional Accessories: IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
    • HDBaseT Transmitter (A/V, PoE, Control) Compatibility: DIGI-HD60C-S, DIGI-HDX-S, FLX-64, INT-HD70-TX, INT-HDX100-TX, DIGI-1X4B-1H, FLX-44, INT-44HDX, INT-66HDX, INT-88HDX, AS-1H1V, AS-1H1V-WP, AS-1H1DP, AS-1H1DP-WP, AS-2H, AS-2H-WP, ASW-WP
    • HDBaseT Transmitter (A/V, Control) Compatibility: FLX-BO4A, DIGI-P123, DIGI-44B, DIGI-88B
    • HDBaseT Transmitter (A/V and PoE) Compatibility: DIGI-HD60-S, DIGI-HD60-WP-S

Intelix INT-HD70-RX
HDMI, IR & RS232 Receiver with PoH

OUR PART #  INT-HD70-RX

Product Information:

The Intelix INT-HD70-RX extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010RX HDBaseT chip. The INT-HD70-RX supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 70m, as well as 3D and 4K x 2K (UHD) signals up to 40m. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required.

The INT-HD70 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.

Intelix INT-HD70-RX Includes:

  • Installation Guide
  • Power Supply
  • 3-pin Removable Screw Terminal

Intelix INT-HD70-RX Features:

  • Extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010TX HDBaseT chip
  • 1080p, including HDCP 2.2 and multichannel audio, up to 70m
  • 3D and 4K x 2K (UHD) signals up to 40m
  • Built-in surge protection and diagnostic LEDs
  • Powered at either the TX or RX end, and only one power supply is required
  • The power supply is included; IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately
  • Compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications

Intelix INT-HD70-RX Specifications:

  • Product Line: INT-HD70-RX\
  • Input/Output Connections:
    • HDMI Output: One (1) HDMI Type A Receptacle
    • HDBaseT Port: One (1) 8P8C port (Shielded RJ45)
    • Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
    • RS232 Port: One (1) 3-pin Removable Terminal Block Connector
    • IR Input: One (1) 3.5 mm TRS Receptacle
    • IR Output: One (1) 3.5 mm TRS Receptacle
  • Supported Audio, Video and Control:
    • Video Resolutions:
      • SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
      • VESA: Resolutions up to 1920x1200
      • Color Depth: 24, 30, 36, 48bit
    • Maximum Video Compatibility at 70 m: Deep Color 36/30/24 Bit at 1080p
    • Maximum Video Compatibility at 40 m: 1080p 3D, UHD/30, Deep Color 48 Bit at 1080p
    • Video Compliance: HDMI 1.4 and HDCP 1.4/2.2
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • ARC (Audio Return Channel): No
    • HEC (HDMI Ethernet Channel): No
    • CEC (Consumer Electronics Control): Yes (Pass-through Only)
    • Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
    • Supported IR Carrier Frequencies: 33 to 55 kHz
  • HDBaseT Signal Characteristics:
    • Maximum Distance: 70 m (229 ft)
    • Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
    • Bandwidth: 10.2 Gbps
    • HDBaseT Chipset: VS010RX
  • Chassis and Environmental:
    • Construction: Black Alumininum
    • Dimensions (HxWxD): 0.64" x 4.73" x 3.31" (16.2 mm x 115 mm x 84 mm)
    • Operating Temperature: +32° to +104° F (0° to +40° C)
    • Operating Humidity: 20% to 90%, Non-condensing
    • Storage Temperature: +14° to +140° F (-10° to +60° C)
    • Storage Humidity: 20% to 90%, Non-condensing
  • Power and Regulatory:
    • Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
    • Power Output: 48V DC PoH (Power over HDBaseT)
    • Power over Ethernet (PoE) Compatibility: 802.3af Alternative A
    • Power Consumption: 5 watts
    • ESD Protection: 15kV air, 8kV contact
    • Regulatory: FCC, CE, RoHS
  • Other:
    • Warranty: 2 years
    • Diagnostic Indicators: HDCP, Link, and Power
    • Optional Accessories: IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
    • HDBaseT Transmitter (A/V, PoE, Control) Compatibility: DIGI-HD60C-S, DIGI-HDX-S, FLX-64, INT-HD70-TX, INT-HDX100-TX, DIGI-1X4B-1H, FLX-44, INT-44HDX, INT-66HDX, INT-88HDX, AS-1H1V, AS-1H1V-WP, AS-1H1DP, AS-1H1DP-WP, AS-2H, AS-2H-WP, ASW-WP
    • HDBaseT Transmitter (A/V, Control) Compatibility: FLX-BO4A, DIGI-P123, DIGI-44B, DIGI-88B
    • HDBaseT Transmitter (A/V and PoE) Compatibility: DIGI-HD60-S, DIGI-HD60-WP-S
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM