Attero Tech CommandHub
Dante Protocol Translation Server

OUR PART #  COMMANDHUB


The CommandHub is a cost-effective device that allows Dante audio routing, device discovery and device control by 3rd party control systems. The CommandHub provides a simplified interface to these systems, allowing the programmer to interact with Attero Tech endpoint devices for parameter control using a name-based protocol, and eliminating the need to communicate directly to endpoint devices using specific IP addresses. Additionally, the CommandHub provides control system access to Dante routing and device monitoring functions for any Dante compatible hardware available on the Dante network.

Realtime control of Dante endpoint device parameters is often times a in requirement in Dante audio network installations. The CommandHub addresses this need and provides a simple solution to bridge a networked control system to the audio network. A simple to program command protocol is exposed to the systems integrator that allows the control system realtime control over Attero Tech endpoint product parameters such as phantom power and mic preamp gain settings.

AtteroTech CommandHub Applications:

  • Consolidate control of many Attero Tech endpointsthrough a single interface
  • Separates control network traffic from Dante traffic,allowing both wired and wireless system control
  • Allows a control system to change Dante audio routing in real time,without the use of Dante Controller

AtteroTech CommandHub Comes With:

  • CommandHub device
  • Mains adapter
  • Figure-8 power adapter
  • Figure-8 style mains cable
  • DC power cable
  • Two blanking plates (1 PSU, 1 main unit)
  • Ethernet cable

AtteroTech CommandHub Features:

  • 3rd party control proxy for Attero Tech end pointproducts
  • Provides access to Dante routing and monitoringfunctions for 3rd party control systems
  • Allows complete separation of Dante network andcontrol network
  • Simplifies control system programming for managementof Dante devices
  • Web server based setup

Attero Tech CommandHub
Dante Protocol Translation Server

OUR PART #  COMMANDHUB

Product Information:

The CommandHub is a cost-effective device that allows Dante audio routing, device discovery and device control by 3rd party control systems. The CommandHub provides a simplified interface to these systems, allowing the programmer to interact with Attero Tech endpoint devices for parameter control using a name-based protocol, and eliminating the need to communicate directly to endpoint devices using specific IP addresses. Additionally, the CommandHub provides control system access to Dante routing and device monitoring functions for any Dante compatible hardware available on the Dante network.

Realtime control of Dante endpoint device parameters is often times a in requirement in Dante audio network installations. The CommandHub addresses this need and provides a simple solution to bridge a networked control system to the audio network. A simple to program command protocol is exposed to the systems integrator that allows the control system realtime control over Attero Tech endpoint product parameters such as phantom power and mic preamp gain settings.

AtteroTech CommandHub Applications:

  • Consolidate control of many Attero Tech endpointsthrough a single interface
  • Separates control network traffic from Dante traffic,allowing both wired and wireless system control
  • Allows a control system to change Dante audio routing in real time,without the use of Dante Controller

AtteroTech CommandHub Comes With:

  • CommandHub device
  • Mains adapter
  • Figure-8 power adapter
  • Figure-8 style mains cable
  • DC power cable
  • Two blanking plates (1 PSU, 1 main unit)
  • Ethernet cable

AtteroTech CommandHub Features:

  • 3rd party control proxy for Attero Tech end pointproducts
  • Provides access to Dante routing and monitoringfunctions for 3rd party control systems
  • Allows complete separation of Dante network andcontrol network
  • Simplifies control system programming for managementof Dante devices
  • Web server based setup
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM