Dynaudio Professional BM9S-MKII
10" Subwoofer With Aluminum Coil, 200W At 4 Ohms

OUR PART #  BM9S-MKII


The Dynaudio BM9S-MKII is a 10" subwoofer with aluminum coil. The BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments. Dynaudio mkII-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.

Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Dynaudio BM9S-MKII Features:

  • 10" woofer with pure aluminum voice coil. 200W @ 4 ohm
  • Phase adjustment in 0° / 180°; Auto on/off, power LED
  • Discrete LFE input, slave output for linking
  • Adjustment of low-pass corner frequencies (50-150 hz)
  • Frequency response of 29 Hz to 250 Hz
  • SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz

Dynaudio BM9S-MKII Specifications:

  • System: Precision Subwoofer
  • Frequency Response: 29 Hz to 250 Hz
  • Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
  • XLR Input impedance: + branch 20 kOhm, – branch 10 kOhm
  • Sensitivity: 75 mVRMS to 5 VRMS, adjustable
  • Max. Input voltage: 10 VRMS
  • Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
  • XLR Output impedance: 100 Ohm (each branch)
  • XLR Pin-out: 1: 0 / 2: + / 3: –
  • Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
  • SAT High-pass: Flat, 60 Hz, 80 Hz
  • SUB Low-pass: 50 Hz to 150 Hz
  • Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15to 20 min.
  • Amplifier power: 200 W, 4 Ohm
  • Power consumption: <16 W Standby, 325 W Max.
  • Woofer: 240 mm/10” One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
  • Weight: 8,8 kg. (19.4 lbs)
  • Dimensions (W x H x L): 290 x 290 x 300 mm (11.4” x 11.4” x 11.8”)

Dynaudio Professional BM9S-MKII
10" Subwoofer With Aluminum Coil, 200W At 4 Ohms

OUR PART #  BM9S-MKII

Product Information:

The Dynaudio BM9S-MKII is a 10" subwoofer with aluminum coil. The BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments. Dynaudio mkII-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.

Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Dynaudio BM9S-MKII Features:

  • 10" woofer with pure aluminum voice coil. 200W @ 4 ohm
  • Phase adjustment in 0° / 180°; Auto on/off, power LED
  • Discrete LFE input, slave output for linking
  • Adjustment of low-pass corner frequencies (50-150 hz)
  • Frequency response of 29 Hz to 250 Hz
  • SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz

Dynaudio BM9S-MKII Specifications:

  • System: Precision Subwoofer
  • Frequency Response: 29 Hz to 250 Hz
  • Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
  • XLR Input impedance: + branch 20 kOhm, – branch 10 kOhm
  • Sensitivity: 75 mVRMS to 5 VRMS, adjustable
  • Max. Input voltage: 10 VRMS
  • Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
  • XLR Output impedance: 100 Ohm (each branch)
  • XLR Pin-out: 1: 0 / 2: + / 3: –
  • Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
  • SAT High-pass: Flat, 60 Hz, 80 Hz
  • SUB Low-pass: 50 Hz to 150 Hz
  • Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15to 20 min.
  • Amplifier power: 200 W, 4 Ohm
  • Power consumption: <16 W Standby, 325 W Max.
  • Woofer: 240 mm/10” One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
  • Weight: 8,8 kg. (19.4 lbs)
  • Dimensions (W x H x L): 290 x 290 x 300 mm (11.4” x 11.4” x 11.8”)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM