MicW i3DMic Pro 750
Binaural mic for GoPro or DSLR

OUR PART #  I-3D-MIC-PRO-750

Log In for price!

Don't have an account? Apply today!

The MicW i3DMic Pro 750 binaural recording microphone is special designed for 3D audio (binaural) recording solution. The i3DMicTM Pro750 combines matched back-electret stereo microphones with high-class headphones, provides combined binaural recording and headset monitoring, enhancing the convenience and enjoyment of field recording. Simply wear the microphone-equipped earphones and capture what you hear, then listen back instantly. You can enjoy realistic sound as if you were there. You can also monitor while recording.

The i3DMic Pro 750 is ideal product to replacing traditional Dummy Head. It is much easier to use to find the sweet spot location for indoor and outdoor 3D recordings.

MicW i3DMic Pro 750 Specifications:

  • Microphone Type: Electret Condenser
  • Capsule Diameter: 7.0 mm
  • Principe of Operation: Pressure
  • Polar Pattern: Omnidirectional
  • Sensitivity (+/- 3 dB): -44 dB (6.3mV/Pa)
  • Frequency Response: 20Hz~20kHz
  • S/N Ratio: > 62dB
  • Impedance: < 2.2k Ohm
  • Maximum SPL: 128 dB
  • Power Source: Plug and Play
  • Operating Temperature: -20?~ 50?
  • Connector: Lemo - 3 Pin, Lemo-3.5mm Cable
  • Headphone: Ultrasone Pro750
  • Frequency Range: 8 Hz ~ 35 kHz
  • Impedance: 40 ohm
  • Sound Pressure Level: 94 dB
  • Driver: 40 mm Titanium-plated
  • Weight: 364 g

MicW i3DMic Pro 750
Binaural mic for GoPro or DSLR

OUR PART #  I-3D-MIC-PRO-750

Product Information:

The MicW i3DMic Pro 750 binaural recording microphone is special designed for 3D audio (binaural) recording solution. The i3DMicTM Pro750 combines matched back-electret stereo microphones with high-class headphones, provides combined binaural recording and headset monitoring, enhancing the convenience and enjoyment of field recording. Simply wear the microphone-equipped earphones and capture what you hear, then listen back instantly. You can enjoy realistic sound as if you were there. You can also monitor while recording.

The i3DMic Pro 750 is ideal product to replacing traditional Dummy Head. It is much easier to use to find the sweet spot location for indoor and outdoor 3D recordings.

MicW i3DMic Pro 750 Specifications:

  • Microphone Type: Electret Condenser
  • Capsule Diameter: 7.0 mm
  • Principe of Operation: Pressure
  • Polar Pattern: Omnidirectional
  • Sensitivity (+/- 3 dB): -44 dB (6.3mV/Pa)
  • Frequency Response: 20Hz~20kHz
  • S/N Ratio: > 62dB
  • Impedance: < 2.2k Ohm
  • Maximum SPL: 128 dB
  • Power Source: Plug and Play
  • Operating Temperature: -20?~ 50?
  • Connector: Lemo - 3 Pin, Lemo-3.5mm Cable
  • Headphone: Ultrasone Pro750
  • Frequency Range: 8 Hz ~ 35 kHz
  • Impedance: 40 ohm
  • Sound Pressure Level: 94 dB
  • Driver: 40 mm Titanium-plated
  • Weight: 364 g
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.