Community D6-B
6.5-Inch Ceiling Speaker, Black

OUR PART #  D6-B


The Community D6-B is a 6.5" ceiling speaker, black.

The D6 has a more focused dispersion, higher sensitivity, output and greater LF extension than the smaller models. The high performance D6 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.

The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model is available as a complete assembly, including everything needed for standard installations, and can also be ordered as separate faces and back cans. The model has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.

Community D6-B Features:

  • Drop-Stop™ and Twist-Assist™ tabs
  • Superb intelligibility with reduced distortion, uniform voicing
  • Easy installation
  • Carbon Ring Cone Technology and Tru-Phase™ waveguide

Community D6-B Specifications:

  • Ceiling Loudspeaker Type: Full Range Coax
  • Max Input Power Rating: 100 Watts
  • Maximum Voltage at Driver (RMS): 30.98 V (100W)
  • Nominal -6 dB Beamwidth: 125° conical
  • HF Compression driver (VC dia.): .803" / 20.4 mm
  • LF loudspeaker (cone dia.): 6.5" / 165.1 mm
  • LF loudspeaker (Voice Coil dia.): 1.5" / 38.1 mm
  • Low Impedance: 8 ohms
  • Grille: Powder Coated Steel Grille with Safety MetalClip\
  • Included Accessories: (2) C-Ring Supporting Plates, (2) Grilles, (2) paintmasks, cut-out template, screwdriver
New Construction Bracket for D6 Ceiling Speaker
Community D6-NCB New Construction Bracket for D6 Ceiling Speaker
The Community D6-NCB is an optional bracket for installing D6 loudspeakers in new construction before drywall or plaster is put into place.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Black D6 Can Adapter/Trim Ring
Community D6-CATR-B Black D6 Can Adapter/Trim Ring
The Community D6-CATR-B is a 6.5" black can adapter for the D6 light. NOTE: Product is BLACK in Apperance 

Usually ships in 7-14 business days.
Need it sooner? Call us!

Community D6-B
6.5-Inch Ceiling Speaker, Black

OUR PART #  D6-B

Product Information:

The Community D6-B is a 6.5" ceiling speaker, black.

The D6 has a more focused dispersion, higher sensitivity, output and greater LF extension than the smaller models. The high performance D6 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.

The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model is available as a complete assembly, including everything needed for standard installations, and can also be ordered as separate faces and back cans. The model has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.

Community D6-B Features:

  • Drop-Stop™ and Twist-Assist™ tabs
  • Superb intelligibility with reduced distortion, uniform voicing
  • Easy installation
  • Carbon Ring Cone Technology and Tru-Phase™ waveguide

Community D6-B Specifications:

  • Ceiling Loudspeaker Type: Full Range Coax
  • Max Input Power Rating: 100 Watts
  • Maximum Voltage at Driver (RMS): 30.98 V (100W)
  • Nominal -6 dB Beamwidth: 125° conical
  • HF Compression driver (VC dia.): .803" / 20.4 mm
  • LF loudspeaker (cone dia.): 6.5" / 165.1 mm
  • LF loudspeaker (Voice Coil dia.): 1.5" / 38.1 mm
  • Low Impedance: 8 ohms
  • Grille: Powder Coated Steel Grille with Safety MetalClip\
  • Included Accessories: (2) C-Ring Supporting Plates, (2) Grilles, (2) paintmasks, cut-out template, screwdriver
New Construction Bracket for D6 Ceiling Speaker
Community D6-NCB New Construction Bracket for D6 Ceiling Speaker
The Community D6-NCB is an optional bracket for installing D6 loudspeakers in new construction before drywall or plaster is put into place.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Black D6 Can Adapter/Trim Ring
Community D6-CATR-B Black D6 Can Adapter/Trim Ring
The Community D6-CATR-B is a 6.5" black can adapter for the D6 light. NOTE: Product is BLACK in Apperance 

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM