Earthworks FMR500HD
19-Inch Cardioid High Definition Podium Microphone With Full Gooseneck Flex

OUR PART #  FMR500HD


Earthworks FMR500HD is a 19 inch cardioid high definition podium microphone with full gooseneck flex.

The 40khz High Definition FlexMic™ podium microphones will allow you to hear more detail with greater clarity than previously possible. Just plug one into the XLR connector on a podium and you will find the audible results absolutely spectacular. The new FMHD podium microphones are the perfect choice for those who demand only the very best and are ideal for use in civic centers, boardrooms, educational facilities, theatres, churches and houses of congress.

Earthworks’ patented technologies incorporated into the HD FlexMic™ Series provide a high level of speech intelligibility and uniform off-axis response to ensure the orator is heard clearly, with no loss in sound quality, when speaking at the front or at the sides of the microphone. This smooth off-axis response also provides more gain before feedback. With 145dB SPL max acoustic input, it is virtually impossible to overload the microphone. There is also high rejection of sounds from the rear of the microphone, with no handling noise in addition to incredible RFI rejection.

Earthworks FMR500HD Features:

  • Uniform frequency response on or off-axis
  • Flat from 50Hz to 40 kHz within +/- 2 dB at 12 inches
  • Will handle up to 139 dB SPL
  • No handling noise
  • High rejection of sounds to the rear of the microphone
  • RFI resistant
  • Incredible gain before feedback
  • Orators can speak above, below or to either side of the microphone andmaintain the same pristine sound quality with high intelligibility

Earthworks FMR500HD Specifications:

  • Frequency Response: 50Hz to 40kHz +/- 2 dB at 12inches (30cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 20mV/Pa (-34dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 139dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 65 Ohm balanced (between pins 2 and3)
  • Min Output Load: 600 Ohm between pins 2 and 3
  • Noise: 16 dB SPL equivalent (A weighted)
  • Weight: .25 lb. (25g)

Earthworks FMR500HD
19-Inch Cardioid High Definition Podium Microphone With Full Gooseneck Flex

OUR PART #  FMR500HD

Product Information:

Earthworks FMR500HD is a 19 inch cardioid high definition podium microphone with full gooseneck flex.

The 40khz High Definition FlexMic™ podium microphones will allow you to hear more detail with greater clarity than previously possible. Just plug one into the XLR connector on a podium and you will find the audible results absolutely spectacular. The new FMHD podium microphones are the perfect choice for those who demand only the very best and are ideal for use in civic centers, boardrooms, educational facilities, theatres, churches and houses of congress.

Earthworks’ patented technologies incorporated into the HD FlexMic™ Series provide a high level of speech intelligibility and uniform off-axis response to ensure the orator is heard clearly, with no loss in sound quality, when speaking at the front or at the sides of the microphone. This smooth off-axis response also provides more gain before feedback. With 145dB SPL max acoustic input, it is virtually impossible to overload the microphone. There is also high rejection of sounds from the rear of the microphone, with no handling noise in addition to incredible RFI rejection.

Earthworks FMR500HD Features:

  • Uniform frequency response on or off-axis
  • Flat from 50Hz to 40 kHz within +/- 2 dB at 12 inches
  • Will handle up to 139 dB SPL
  • No handling noise
  • High rejection of sounds to the rear of the microphone
  • RFI resistant
  • Incredible gain before feedback
  • Orators can speak above, below or to either side of the microphone andmaintain the same pristine sound quality with high intelligibility

Earthworks FMR500HD Specifications:

  • Frequency Response: 50Hz to 40kHz +/- 2 dB at 12inches (30cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 20mV/Pa (-34dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 139dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 65 Ohm balanced (between pins 2 and3)
  • Min Output Load: 600 Ohm between pins 2 and 3
  • Noise: 16 dB SPL equivalent (A weighted)
  • Weight: .25 lb. (25g)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM