Celestion FTR18-4080HDX
18" Ferrite Subwoofer, 8 Ohm

OUR PART #  FTR18-4080HDX


The Celestion FTR18-4080HDX is a 18" 100-watt low frequency cast chassis ferrite PA subwoofer speaker.

Celestion FTR18-4080HDX Features:

  • 18" ferrite subwoofer provides 1000Wrms (AES standard) power handling anda frequency response of 30 Hz-2500 Hz
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat,preventing sensitivity loss through thermal compression
  • Double suspension and a “multi-roll” surround provide exceptionallinearity at extremes of cone excursion
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
  • Less than 10kg – very low weight for this product class

Celestion FTR18-4080HDX Specifications:

  • Nominal diameter: 457mm/18in
  • Power rating: 1000Wrms
  • Nominal impedance: 8 Ohms
  • Sensitivity: 95 dB
  • Frequency range: 30-2500 Hz
  • Voice coil diameter: 100mm/4in
  • Chassis type: Cast aluminium
  • Magnet type: Ferrite
  • Magnet weight: 3.1kg/110oz
  • Coil material: Round copper
  • Former material: Glass Fibre
  • Cone material:  Glass loaded paper with weather-resistant
  • Surround material: Cloth-sealed
  • Suspension: Double
  • Xmax: 8mm/0.33in
  • Gap depth: 9.5mm/0.37in
  • Voice coil winding width: 25mm/0.99in

General Parts Questions

Question:
What do I do if my item still doesn’t work or has additional problems?
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnos......See more
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnosed fault, incorrect installation, or incorrect operation of your device.

If you’re not confident in your diagnosis it may be best to take your item to a qualified technician.

Question:
The part I purchased is defective or failed soon after my purchase. Does it have a warranty?
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t ......See more
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t consider an item eligible for return if the part isn’t installed by an authorized center.

If you’re concerned about the duration of a spare part warranty please contact us before placing your order. Be aware that if you install a part to repair an item that’s still under the manufacturer’s warranty you may void the warranty in your item by performing unauthorized repairs.

Question:
Can you help me diagnose my item?
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item;......See more
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item; it may be best to take your item to a qualified technician.
Question:
Am I ordering the correct part?
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a ......See more
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a part that appears to be a match for your item but your model isn’t listed - please contact us so we can confirm compatibility. It is possible that a part can fit more models than we have listed.

Parts appearance may vary from the original component depending on the manufacturer the vendor uses. Please be aware that we cannot be responsible for damages because of installation of an incorrect part. Unopened, uninstalled parts can be returned within 30 days.

Celestion FTR18-4080HDX
18" Ferrite Subwoofer, 8 Ohm

OUR PART #  FTR18-4080HDX

Product Information:

The Celestion FTR18-4080HDX is a 18" 100-watt low frequency cast chassis ferrite PA subwoofer speaker.

Celestion FTR18-4080HDX Features:

  • 18" ferrite subwoofer provides 1000Wrms (AES standard) power handling anda frequency response of 30 Hz-2500 Hz
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat,preventing sensitivity loss through thermal compression
  • Double suspension and a “multi-roll” surround provide exceptionallinearity at extremes of cone excursion
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
  • Less than 10kg – very low weight for this product class

Celestion FTR18-4080HDX Specifications:

  • Nominal diameter: 457mm/18in
  • Power rating: 1000Wrms
  • Nominal impedance: 8 Ohms
  • Sensitivity: 95 dB
  • Frequency range: 30-2500 Hz
  • Voice coil diameter: 100mm/4in
  • Chassis type: Cast aluminium
  • Magnet type: Ferrite
  • Magnet weight: 3.1kg/110oz
  • Coil material: Round copper
  • Former material: Glass Fibre
  • Cone material:  Glass loaded paper with weather-resistant
  • Surround material: Cloth-sealed
  • Suspension: Double
  • Xmax: 8mm/0.33in
  • Gap depth: 9.5mm/0.37in
  • Voice coil winding width: 25mm/0.99in
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM