Atlas Sound I8SC+
8" In-Wall/In-Ceiling, PoE+ Indoor IP Loudspeaker System With LED Display

OUR PART #  I8SC+


AtlasIED I8SC+ is an indoor wall mount IP loudspeaker with integrated LED display. It leverages VoIP communication to extend tele-presence with enhanced audio for environments where network-wide communication is desired and high-output loudspeakers are required to overcome high ambient noise and/or large spaces.

AtlasIED I8SC+ registers as a communication endpoint directly within InformaCast, GCK, and SA-Announce advanced notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded and scheduled announcements, while leveraging the WAN or LAN network architecture.

When used within a Cisco environment, the I8SC+ loudspeakers can join Cisco’s Unified Survivable Remote Site Telephony (SRST)
as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco
Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination
of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the I8SC+ loudspeakers can register as SIP devices directly to a SIP server or
VoIP Communications Manager for critical alerts and public address applications.

Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with
disabilities. The AtlasIED I8SC+ IP loudspeakers with LED display provide effective communication for all individuals.

AtlasIED I8SC+ Features:

  • 2 General Purpose Inputs
  • 1 Relay Output (2A @ 30 VDC)
  • Phone/Night Loud Ringer
  • External Power Supply Option
  • (8) 64 LED Display for Clock or Scrolling Text

AtlasIED I8SC+ Specifications:

  • System:
    • Type: PoE+ Indoor IP Loudspeaker System with LED Display
    • Operation Mode: Self Powered
    • Indicators: Network Status (On Back)
    • Operating Range (-10 db): 70 Hz - 15.5 kHz
    • Frequency Response (+/- 5 dB): 86 Hz - 15.5 kHz
    • Vertical Coverage: 105° 800 Hz - 4 kHz
    • Horizontal Coverage: 105° 800 Hz - 4 kHz
    • Directivity Factor (Q): 4.7 @ 2 kHz
    • Max SPL at 1 m (passive): 106 dB SPL Continuous / 109 dB SPL Peak
    • Recommended Signal Processing: Built-In Processing
    • General Purpose Interface: Two Trigger Inputs / One Relay Output (2A @ 30 VDC)
  • Enclosure
    • Color: White (RAL9010)
    • Grille Material: Powder Coated Steel, White Finish, Paintable
    • Baffle Material: 18-gauge Corrosion-Resistant Zinc Plated Steel
    • Mounting/Rigging Provisions: Mounting Enclosure is Not Included (See Optional Enclosure) Safety Agency Ratings: ETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1
    • Ingress Protection: IP-30
    • Logo: Blue and Removable
    • Product Dimensions (H x W x D): 14.38 x 12.88 x 2.77" (365 x 327 x 70.36 mm)
    • Shipping Dimensions (H x W x D): 14.56 x 13.19 x 4.5" (369 x 335 x 114 mm)
    • Net Weight: 4.82 lbs (2.2kg)
    • Shipping Weight:  6 lbs (2.7kg)

Atlas Sound I8SC+
8" In-Wall/In-Ceiling, PoE+ Indoor IP Loudspeaker System With LED Display

OUR PART #  I8SC+

Product Information:

AtlasIED I8SC+ is an indoor wall mount IP loudspeaker with integrated LED display. It leverages VoIP communication to extend tele-presence with enhanced audio for environments where network-wide communication is desired and high-output loudspeakers are required to overcome high ambient noise and/or large spaces.

AtlasIED I8SC+ registers as a communication endpoint directly within InformaCast, GCK, and SA-Announce advanced notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded and scheduled announcements, while leveraging the WAN or LAN network architecture.

When used within a Cisco environment, the I8SC+ loudspeakers can join Cisco’s Unified Survivable Remote Site Telephony (SRST)
as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco
Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination
of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the I8SC+ loudspeakers can register as SIP devices directly to a SIP server or
VoIP Communications Manager for critical alerts and public address applications.

Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with
disabilities. The AtlasIED I8SC+ IP loudspeakers with LED display provide effective communication for all individuals.

AtlasIED I8SC+ Features:

  • 2 General Purpose Inputs
  • 1 Relay Output (2A @ 30 VDC)
  • Phone/Night Loud Ringer
  • External Power Supply Option
  • (8) 64 LED Display for Clock or Scrolling Text

AtlasIED I8SC+ Specifications:

  • System:
    • Type: PoE+ Indoor IP Loudspeaker System with LED Display
    • Operation Mode: Self Powered
    • Indicators: Network Status (On Back)
    • Operating Range (-10 db): 70 Hz - 15.5 kHz
    • Frequency Response (+/- 5 dB): 86 Hz - 15.5 kHz
    • Vertical Coverage: 105° 800 Hz - 4 kHz
    • Horizontal Coverage: 105° 800 Hz - 4 kHz
    • Directivity Factor (Q): 4.7 @ 2 kHz
    • Max SPL at 1 m (passive): 106 dB SPL Continuous / 109 dB SPL Peak
    • Recommended Signal Processing: Built-In Processing
    • General Purpose Interface: Two Trigger Inputs / One Relay Output (2A @ 30 VDC)
  • Enclosure
    • Color: White (RAL9010)
    • Grille Material: Powder Coated Steel, White Finish, Paintable
    • Baffle Material: 18-gauge Corrosion-Resistant Zinc Plated Steel
    • Mounting/Rigging Provisions: Mounting Enclosure is Not Included (See Optional Enclosure) Safety Agency Ratings: ETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1
    • Ingress Protection: IP-30
    • Logo: Blue and Removable
    • Product Dimensions (H x W x D): 14.38 x 12.88 x 2.77" (365 x 327 x 70.36 mm)
    • Shipping Dimensions (H x W x D): 14.56 x 13.19 x 4.5" (369 x 335 x 114 mm)
    • Net Weight: 4.82 lbs (2.2kg)
    • Shipping Weight:  6 lbs (2.7kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM