DPA Microphones SCO61B00-N47
d:screet Omnidirectional Necklace Microphone, 47 cm, Black

OUR PART #  SCO61B00-N47


The DPA microphones SCO61B00-N47 is a d:Screet necklace microphone. It is 47 cm long and features a frequency response of 20 Hz to 20 kHz.

 This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range.

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Specifications:

  • Directional pattern: Onmidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, + / - 2 dB: High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, + / - 3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB (A) re. 20 µPa (max. 28 dB (A))
  • Equivalaent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1 % up to 123 dB SPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Weight: 17 g (0.04 oz) including Cable and MicroDot connector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative Humidity (RH): Up to 90%
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6034 MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6034 is a MicroDot to Mini-Jack (with thread) adapter for DPA's series of Miniature Microphones and for use with Sennhesier's Evolution G2 / G3 / X2 digital wireless systems.
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Pack of 5 Black High Boost Miniature Grids
DPA Microphones DUA6002 Pack of 5 Black High Boost Miniature Grids
The DUA6002 is a kit of 5 black protection grids for the Miniature Microphones. When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

DPA Microphones SCO61B00-N47
d:screet Omnidirectional Necklace Microphone, 47 cm, Black

OUR PART #  SCO61B00-N47

Product Information:

The DPA microphones SCO61B00-N47 is a d:Screet necklace microphone. It is 47 cm long and features a frequency response of 20 Hz to 20 kHz.

 This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range.

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Specifications:

  • Directional pattern: Onmidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, + / - 2 dB: High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, + / - 3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB (A) re. 20 µPa (max. 28 dB (A))
  • Equivalaent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1 % up to 123 dB SPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Weight: 17 g (0.04 oz) including Cable and MicroDot connector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative Humidity (RH): Up to 90%
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6034 MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6034 is a MicroDot to Mini-Jack (with thread) adapter for DPA's series of Miniature Microphones and for use with Sennhesier's Evolution G2 / G3 / X2 digital wireless systems.
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).
Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 
Usually ships in 7-14 business days.
Need it sooner? Call us!
Pack of 5 Black High Boost Miniature Grids
DPA Microphones DUA6002 Pack of 5 Black High Boost Miniature Grids
The DUA6002 is a kit of 5 black protection grids for the Miniature Microphones. When fitted the grids introduces a 10 dB soft boost around 12 kHz for applications where the Miniature Microphones need to be placed on the chest of the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.