DPA Microphones Necklace 4061 Microphone
d:screet Omnidirectional Necklace Microphone, 47 cm, with TA4F Connector for Shure, White

OUR PART #  SCO61W10-N47


This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range.

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Specifications:

  • Directional pattern: Onmidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, + / - 2 dB: High boost grid: 20 Hz -20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, + / - 3 dB at 1 kHz: 6 mV / Pa;-44 dB re. 1 V / Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB (A)re. 20 µPa (max. 28 dB (A))
  • Equivalaent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1 % up to 123dB SPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Cable drive capability: Up to 300 m (984 ft) withDAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Weight: 17 g (0.04 oz) including Cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressureproduces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLRadapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative Humidity (RH): Up to 90%

DPA Microphones Necklace 4061 Microphone
d:screet Omnidirectional Necklace Microphone, 47 cm, with TA4F Connector for Shure, White

OUR PART #  SCO61W10-N47

Product Information:

This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range.

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Features:

  • Plug and play mounting
  • Consistent output
  • Minimal visual impact
  • Modular adapter system fits most professional wireless systems

DPA Microphones d:screet™ NECKLACE 4061 MICROPHONE Specifications:

  • Directional pattern: Onmidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, + / - 2 dB: High boost grid: 20 Hz -20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, + / - 3 dB at 1 kHz: 6 mV / Pa;-44 dB re. 1 V / Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB (A)re. 20 µPa (max. 28 dB (A))
  • Equivalaent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1 % up to 123dB SPL peak
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Cable drive capability: Up to 300 m (984 ft) withDAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced withDAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max.50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mAwith DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Weight: 17 g (0.04 oz) including Cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)
  • Cable length: 1.2 m (3.9 ft)
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressureproduces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLRadapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative Humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM