Powersoft Advanced Tech M30D-HDSP+ETH
2-Channel Power Amplifier With DSP And Ethernet

OUR PART #  M30D-HDSP+ETH

Log In for price!

Don't have an account? Apply today!

The PowersoftAudio M30D-HDSP+ETH is a 2-channel power amplifier with DSP and Ethernet for portable and permanently installed applications. Equally versatile in both portable and installed system configurations and with delivering up to 3,000 W out of one single rack unit weighing just over 7 kg / 16 lb, the M30D HDSP+ETH is a highly flexible, cost-effective solution for small to medium sound systems.

The M30D HDSP+ETH provides unparalleled levels of control and monitoring through the Armonía Pro Audio Suite™ software, with the same user interface and on the same network as all Powersoft amplifiers. Locally, the M30D HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel. Furthermore, the high-performance DSP is tucked away inside and safe against accidental or intentional tampering.

Powersoft Audio M30D-HDSP+ETH Features:

  • Driving distributed line systems: Able to drive 70 V/ 100 V distributed lines directly without the need for transformers
  • Direct PC/network connection
  • Four presets on board with selection button
  • Optimized for 4 Ohm loads
  • Fully protected circuit design
  • Temperature controlled continuous variable speed fan,front to rear airflow
  • Recessed stepped level attenuators

Powersoft Audio M30D-HDSP+ETH Specifications:

  • General
    • Number of channels: 2
    • Output Power:
      • 2-Channel Mode
      • 4 Ohms / Ch: 1,500 W
      • 8 Ohms / Ch: 900 W
      • 70 V: 1,200 W
      • 100 V: 1,500 W
    • Max output voltage / current: 135 v peak / 65 A peak
  • AC Mains
    • Power Supply: Universal, regulated switch mode
    • Operating voltage / Inrush current: 115 V / 230 V (factory selection) + / - 15%, 50 Hz - 60 Hz / < 28 ARMS
  • Thermal
    • Environmental operating temperature: 32° - 113° F (0° - 45° C)
    • Thermal dissipation: Fan, continuously variable speed, temperature controlled, front to rear airflow
  • Audio
    • Gain: 32 dB, 30 dB, 28 dB, 26 dB, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 4 dB, etc., user selectable
    • Frequency response: 10 Hz - 30 kHz (1 W @ 8 O, + / - 3 dB)
    • S/N ratio (amplifier section): 108 dBA (20 Hz - 20 kHz, A weighted)
    • Crosstalk separation: > 70 dB @ 1 kHz
    • Input sensitivity @ 8 Ohm: 2.13 V / 8.8 dBu
    • Max input level: 6 V / 17.7 dBu
    • Input impedance: 10 kOhms
    • THD+N / SMPTE IMD: </= 0.08 % @ 1/2 of full power
    • DIM100 IMD: typ. < 0.005 % (< 0.02 % @ > 0.1 W)
    • Damping factor @ 8 Ohm: > 5000 @ 100 Hz
  • DSP
    • A/D converter: CS5381, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • D/A converter: CS4398, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • Frequency response @ -3 dB: 7 Hz - 22 kHz
    • THD: < 0.01% (20 Hz - 20 kHz)
    • Presets: Bank of 4 presets, management and upload via Armonía Pro Audio Suite
    • Delay for time alignment: 10 ms per output
    • Crossover filters: Butterworth, Linkwitz-Riley, Bessel, 6 dB / oct to 48 dB / oct
    • Output equalizer: up to 12 biquad fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass.
    • Input equalizer: up to 5 biquad filters (PEQ, shelving, band pass, band stop, all pass)
      Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
    • Damping control: < 120 Hz, range +/- 2 Ohm
    • System Delay: up to 170 ms for 2 IN / 2 OUT or 340 ms for 1 IN / 2 OUT
  • Front Panel
    • Indicators:
      • 4 LEDs per channel: 3 x green, 1 x red
      • 2 status LEDs: 1 x green, 1 x yellow
    • Controls: 1 stepped level attenuator pot per channel; mains switch
    • Maintenance: Dust filter foam behind front panel
  • Rear Panel
    • Audio signal input connectors: (2) balanced Neutrik® XLR female
    • Loudspeaker output connectors: (2) Neutrik® Speakon NL4MD, 2 x Neutrik® XLR male hard-wired to the corresponding input
    • Network data port Ethernet: (1) RJ45 with activity LED with 2 rotary address switches
    • DSP preset selection: (1) Pushbutton (stepping through bank of 4 presets); 1 x 4 LED preset indicators
    • Aux voltage 1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
    • AC mains: IEC C13 16 A connector; AC mains cord with 3-pin plug 15 A for US, IEC Schuko 16 A for every other nation
    • Controls: (1) link switch, linking analog inputs 1 and 2
  • Construction
    • Dimensions (W x H x D): 19" x 1.75" x 14" (483 x 44.5 x 358 mm)
    • Chassis: 1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole protection, steel side reinforcement & rear support
    • Weight: 16 lb (7.3 kg)

Powersoft Advanced Tech M30D-HDSP+ETH
2-Channel Power Amplifier With DSP And Ethernet

OUR PART #  M30D-HDSP+ETH

Product Information:

The PowersoftAudio M30D-HDSP+ETH is a 2-channel power amplifier with DSP and Ethernet for portable and permanently installed applications. Equally versatile in both portable and installed system configurations and with delivering up to 3,000 W out of one single rack unit weighing just over 7 kg / 16 lb, the M30D HDSP+ETH is a highly flexible, cost-effective solution for small to medium sound systems.

The M30D HDSP+ETH provides unparalleled levels of control and monitoring through the Armonía Pro Audio Suite™ software, with the same user interface and on the same network as all Powersoft amplifiers. Locally, the M30D HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel. Furthermore, the high-performance DSP is tucked away inside and safe against accidental or intentional tampering.

Powersoft Audio M30D-HDSP+ETH Features:

  • Driving distributed line systems: Able to drive 70 V/ 100 V distributed lines directly without the need for transformers
  • Direct PC/network connection
  • Four presets on board with selection button
  • Optimized for 4 Ohm loads
  • Fully protected circuit design
  • Temperature controlled continuous variable speed fan,front to rear airflow
  • Recessed stepped level attenuators

Powersoft Audio M30D-HDSP+ETH Specifications:

  • General
    • Number of channels: 2
    • Output Power:
      • 2-Channel Mode
      • 4 Ohms / Ch: 1,500 W
      • 8 Ohms / Ch: 900 W
      • 70 V: 1,200 W
      • 100 V: 1,500 W
    • Max output voltage / current: 135 v peak / 65 A peak
  • AC Mains
    • Power Supply: Universal, regulated switch mode
    • Operating voltage / Inrush current: 115 V / 230 V (factory selection) + / - 15%, 50 Hz - 60 Hz / < 28 ARMS
  • Thermal
    • Environmental operating temperature: 32° - 113° F (0° - 45° C)
    • Thermal dissipation: Fan, continuously variable speed, temperature controlled, front to rear airflow
  • Audio
    • Gain: 32 dB, 30 dB, 28 dB, 26 dB, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 4 dB, etc., user selectable
    • Frequency response: 10 Hz - 30 kHz (1 W @ 8 O, + / - 3 dB)
    • S/N ratio (amplifier section): 108 dBA (20 Hz - 20 kHz, A weighted)
    • Crosstalk separation: > 70 dB @ 1 kHz
    • Input sensitivity @ 8 Ohm: 2.13 V / 8.8 dBu
    • Max input level: 6 V / 17.7 dBu
    • Input impedance: 10 kOhms
    • THD+N / SMPTE IMD: </= 0.08 % @ 1/2 of full power
    • DIM100 IMD: typ. < 0.005 % (< 0.02 % @ > 0.1 W)
    • Damping factor @ 8 Ohm: > 5000 @ 100 Hz
  • DSP
    • A/D converter: CS5381, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • D/A converter: CS4398, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • Frequency response @ -3 dB: 7 Hz - 22 kHz
    • THD: < 0.01% (20 Hz - 20 kHz)
    • Presets: Bank of 4 presets, management and upload via Armonía Pro Audio Suite
    • Delay for time alignment: 10 ms per output
    • Crossover filters: Butterworth, Linkwitz-Riley, Bessel, 6 dB / oct to 48 dB / oct
    • Output equalizer: up to 12 biquad fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass.
    • Input equalizer: up to 5 biquad filters (PEQ, shelving, band pass, band stop, all pass)
      Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
    • Damping control: < 120 Hz, range +/- 2 Ohm
    • System Delay: up to 170 ms for 2 IN / 2 OUT or 340 ms for 1 IN / 2 OUT
  • Front Panel
    • Indicators:
      • 4 LEDs per channel: 3 x green, 1 x red
      • 2 status LEDs: 1 x green, 1 x yellow
    • Controls: 1 stepped level attenuator pot per channel; mains switch
    • Maintenance: Dust filter foam behind front panel
  • Rear Panel
    • Audio signal input connectors: (2) balanced Neutrik® XLR female
    • Loudspeaker output connectors: (2) Neutrik® Speakon NL4MD, 2 x Neutrik® XLR male hard-wired to the corresponding input
    • Network data port Ethernet: (1) RJ45 with activity LED with 2 rotary address switches
    • DSP preset selection: (1) Pushbutton (stepping through bank of 4 presets); 1 x 4 LED preset indicators
    • Aux voltage 1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
    • AC mains: IEC C13 16 A connector; AC mains cord with 3-pin plug 15 A for US, IEC Schuko 16 A for every other nation
    • Controls: (1) link switch, linking analog inputs 1 and 2
  • Construction
    • Dimensions (W x H x D): 19" x 1.75" x 14" (483 x 44.5 x 358 mm)
    • Chassis: 1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole protection, steel side reinforcement & rear support
    • Weight: 16 lb (7.3 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.