DBX DriveRack VENU360-D
Complete Loudspeaker Management System With Dante

OUR PART #  DRVRACK-VENU-360-DAN


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

The VENU360-D model provides all the features of the standard VENU360 model but adds Dante-enabled RJ-45 ports for interfacing with other Dante-equipped devices. It offers a 7 x 6 routing/mixing matrix (using any available combination of AES, analog, and Dante input channels) and a 3 x 6 signal processing chain.

dbx DriveRack VENU360-D Features:

  • Input Processing
    • dbx Compression
    • AFS™ (Advanced Feedback Suppression)
    • 31-Band Graphic EQ
    • 12-Band Parametric EQ (with narrow notch capabilities)
    • Subharmonic Synthesis
    • Backline Delay
    • Noise Gate
  • Output Processing
    • Crossover (supports full range up to mono 6-way systems)
    • 12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
    • dbx Compression
    • Automatic Gain Control
    • Subharmonic Synthesis
    • Noise Gate
    • Tower Delays (up to 1000ms per output)
    • 8-Band Parametric EQs (used for speaker tunings)
    • dbx Limiting
    • Driver Alignment Delays

dbx DriveRack VENU360-D Specifications:

  • Input: (3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
  • Input Connectors: (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
  • Input Type: Electronically balanced/RF filtered
  • Input Impedance: > 30 k Ohm, balanced line to line
  • Max Input Level (line inputs): > +28 dBu, balanced, </= 1% THD
  • CMRR: > 50 dB @ 1 kHz
  • RTA Mic Preamp Phantom Power: +48 VDC
  • Output: (6) Line Outputs
  • Output Connectors: Male XLR
  • Output Type: Electronically balanced, RF filtered
  • Output Impedance: 120 Ohms, balanced line to line
  • Max Output Level: +22 dBu, balanced, </= 1% THD
  • DANTE™ Audio Connectors: (2) RJ-45 connectors
  • DANTE™ Audio Maximum Cable Length: 100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices
  • DANTE™ Latency : 0.15ms-5.0ms
  • Alignment Delay: Up to 1000 ms per output channel
  • A/D Converter: 24-bit with dbx Type IV™ Conversion System
  • A/D Dynamic Range: 117 dB A-weighted, 114 dB unweighted, 22 kHz BW
  • Type IV Dynamic Range: 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
  • D/A Converter: 24-bit
  • D/A Dynamic Range: 116 dB A-weighted, 113 dB unweighted, 22 kHz BW
  • Internal Processing Wordlength: 32-bit floating point
  • Supported Sample Rates: 48 / 96 kHz (32 - 192 kHz using sample rate conversion)
  • System Performance Dynamic Range: 114 dB A-weighted; 110 dB unweighted
  • THD + Noise: 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
  • Frequency Response: 20 Hz – 20 kHz, +0 /- 0.5 dB
  • Interchannel Crosstalk: < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
  • Latency: Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)
  • Operating Voltage: 100-240 VAC 50/60 Hz
  • Power Consumption: 18 W
  • Unit Weight: 5.48 lbs. (2.49 kg)
  • Shipping Weight: 7.10 lbs. (3.22 kg)
  • Dimensions (H x D x W): 1.75 x 8.0 x 19” (4.4 x 20.32 x 48.26 cm)

DBX DriveRack VENU360-D
Complete Loudspeaker Management System With Dante

OUR PART #  DRVRACK-VENU-360-DAN

Product Information:

The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

The VENU360-D model provides all the features of the standard VENU360 model but adds Dante-enabled RJ-45 ports for interfacing with other Dante-equipped devices. It offers a 7 x 6 routing/mixing matrix (using any available combination of AES, analog, and Dante input channels) and a 3 x 6 signal processing chain.

dbx DriveRack VENU360-D Features:

  • Input Processing
    • dbx Compression
    • AFS™ (Advanced Feedback Suppression)
    • 31-Band Graphic EQ
    • 12-Band Parametric EQ (with narrow notch capabilities)
    • Subharmonic Synthesis
    • Backline Delay
    • Noise Gate
  • Output Processing
    • Crossover (supports full range up to mono 6-way systems)
    • 12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
    • dbx Compression
    • Automatic Gain Control
    • Subharmonic Synthesis
    • Noise Gate
    • Tower Delays (up to 1000ms per output)
    • 8-Band Parametric EQs (used for speaker tunings)
    • dbx Limiting
    • Driver Alignment Delays

dbx DriveRack VENU360-D Specifications:

  • Input: (3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
  • Input Connectors: (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
  • Input Type: Electronically balanced/RF filtered
  • Input Impedance: > 30 k Ohm, balanced line to line
  • Max Input Level (line inputs): > +28 dBu, balanced, </= 1% THD
  • CMRR: > 50 dB @ 1 kHz
  • RTA Mic Preamp Phantom Power: +48 VDC
  • Output: (6) Line Outputs
  • Output Connectors: Male XLR
  • Output Type: Electronically balanced, RF filtered
  • Output Impedance: 120 Ohms, balanced line to line
  • Max Output Level: +22 dBu, balanced, </= 1% THD
  • DANTE™ Audio Connectors: (2) RJ-45 connectors
  • DANTE™ Audio Maximum Cable Length: 100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices
  • DANTE™ Latency : 0.15ms-5.0ms
  • Alignment Delay: Up to 1000 ms per output channel
  • A/D Converter: 24-bit with dbx Type IV™ Conversion System
  • A/D Dynamic Range: 117 dB A-weighted, 114 dB unweighted, 22 kHz BW
  • Type IV Dynamic Range: 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
  • D/A Converter: 24-bit
  • D/A Dynamic Range: 116 dB A-weighted, 113 dB unweighted, 22 kHz BW
  • Internal Processing Wordlength: 32-bit floating point
  • Supported Sample Rates: 48 / 96 kHz (32 - 192 kHz using sample rate conversion)
  • System Performance Dynamic Range: 114 dB A-weighted; 110 dB unweighted
  • THD + Noise: 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
  • Frequency Response: 20 Hz – 20 kHz, +0 /- 0.5 dB
  • Interchannel Crosstalk: < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
  • Latency: Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)
  • Operating Voltage: 100-240 VAC 50/60 Hz
  • Power Consumption: 18 W
  • Unit Weight: 5.48 lbs. (2.49 kg)
  • Shipping Weight: 7.10 lbs. (3.22 kg)
  • Dimensions (H x D x W): 1.75 x 8.0 x 19” (4.4 x 20.32 x 48.26 cm)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM