DBX DJDI
2-Channel Passive Direct Box That Converts Unbalanced Signal

OUR PART #  DJDI


The 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of signal levels and its passive design means clean, quiet and uncolored operation with no power required.

DBX DJDI Features:

  • Dual Channel
  • (2) 1/4” 50k Ohm TS Inputs
  • (2) XLR Transformer-Isolated 600 Ohm Input/Outputs
  • Passive Circuit Design
  • Continuously Variable Input Attenuator
  • Ground Lift Switch 

DBX DJDI Specifications:

  • Circuit: Passive
  • Inputs: 2
  • Input Connectors: 1/4” TS (Tip Hot, Sleeve Ground)
  • Input Type: Unbalanced, RF Filtered
  • Input Impedance: 50 kOhm
  • Outputs: 2
  • Output Connectors: Male XLR, Balanced, Pin 2 hot
  • Output Impedance: 600 Ohms
  • Noise Level: -104 dBu (22 Hz - 22 kHz, Input Shorted)
  • THD+N (10 Hz - 22 kHz): 0.23% typical @ + 4 dBu @ 1kHz
  • Insertion Loss: 21 dB typical

DBX DJDI
2-Channel Passive Direct Box That Converts Unbalanced Signal

OUR PART #  DJDI

Product Information:

The 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of signal levels and its passive design means clean, quiet and uncolored operation with no power required.

DBX DJDI Features:

  • Dual Channel
  • (2) 1/4” 50k Ohm TS Inputs
  • (2) XLR Transformer-Isolated 600 Ohm Input/Outputs
  • Passive Circuit Design
  • Continuously Variable Input Attenuator
  • Ground Lift Switch 

DBX DJDI Specifications:

  • Circuit: Passive
  • Inputs: 2
  • Input Connectors: 1/4” TS (Tip Hot, Sleeve Ground)
  • Input Type: Unbalanced, RF Filtered
  • Input Impedance: 50 kOhm
  • Outputs: 2
  • Output Connectors: Male XLR, Balanced, Pin 2 hot
  • Output Impedance: 600 Ohms
  • Noise Level: -104 dBu (22 Hz - 22 kHz, Input Shorted)
  • THD+N (10 Hz - 22 kHz): 0.23% typical @ + 4 dBu @ 1kHz
  • Insertion Loss: 21 dB typical
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM