Tripp Lite SM1000RM1UTAA
SmartPro 120V Line-Interactive Sine Wave UPS System

OUR PART #  SM1000RM1UTAA


Tripp Lite's SM1000RM1UTAA SmartPro® 120V 1kVA 800W Line-Interactive Sine Wave UPS System provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Well suited for backing up servers and network storage devices, the SM1000RM1UTAA switches to 1kVA/800W battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Two of the six NEMA 5-15R outlets may be switched off remotely to reboot equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. The internal battery provides 14 minutes of support at half load (400W) and four minutes at full load (800W). Operating with a high 99% line mode efficiency, the ENERGY STAR-certified SM1000RM1UTAA meets strict EPA guidelines.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 450-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s included PowerAlert® software, the SM1000RM1UTAA enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional Tripp Lite SNMPWEBCARD accessory card (sold separately) allows remote management of the UPS, including reboots and activity logs.

Tripp Lite SM1000RM1UTAA SmartPro UPS System Includes:

  • SM1000RM1UTAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS
  • USB cable
  • DB9 cable
  • EPO cable
  • PowerAlert software
  • Mounting hardware

Tripp Lite SM1000RM1UTAA SmartPro UPS System Features:

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • (6) NEMA 5-15R outlets
  • 10 ft. power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating

Reliable Battery Backup

  • Supports half load up to 14 minutes and full load up to 4 minutes
  • Internal batteries designed for hot-swap field replacement

Switchable Outlets

  • (2) load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation(AVR)

  • Maintains 120V nominal output over input range of 83V–147V without using battery power

EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance

ENERGY STAR Certification

  • 99% line mode efficiency saves money and energy and protects environment by meeting strict EPA efficiency guidelines

LED Indicators

  • Front-panel LEDs signal power, voltage correction, load level and battery charge state

SNMP/Web Capability

  • Optional Tripp Lite SNMPWEBCARD (sold separately) permits remote management of UPS, including reboots, configuration, updates, and activity logs

Communications Ports

  • USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
  • EPO port supports emergency shutdown in large facilities

Versatile Installation Options

  • Hardware included for mounting in 1RU of EIA-standard 19" 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory (sold separately) available for extra support in 4-post installations

TAA Compliant

  • Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases

NOTE: For technical specifications, please view the data sheet located on the Documentation tab

Power Strip, 15' Cord
Tripp Lite PDU1215 Power Strip, 15' Cord
Tripp Lite's PDU1215 AC power distribution unit offers 15 amp, 120 volt capacity in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for wallmount, under-counter or 1U/0U rackmount installation. Uses only 1 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Tripp Lite SM1000RM1UTAA
SmartPro 120V Line-Interactive Sine Wave UPS System

OUR PART #  SM1000RM1UTAA

Product Information:

Tripp Lite's SM1000RM1UTAA SmartPro® 120V 1kVA 800W Line-Interactive Sine Wave UPS System provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Well suited for backing up servers and network storage devices, the SM1000RM1UTAA switches to 1kVA/800W battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Two of the six NEMA 5-15R outlets may be switched off remotely to reboot equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. The internal battery provides 14 minutes of support at half load (400W) and four minutes at full load (800W). Operating with a high 99% line mode efficiency, the ENERGY STAR-certified SM1000RM1UTAA meets strict EPA guidelines.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 450-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s included PowerAlert® software, the SM1000RM1UTAA enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional Tripp Lite SNMPWEBCARD accessory card (sold separately) allows remote management of the UPS, including reboots and activity logs.

Tripp Lite SM1000RM1UTAA SmartPro UPS System Includes:

  • SM1000RM1UTAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS
  • USB cable
  • DB9 cable
  • EPO cable
  • PowerAlert software
  • Mounting hardware

Tripp Lite SM1000RM1UTAA SmartPro UPS System Features:

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • (6) NEMA 5-15R outlets
  • 10 ft. power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating

Reliable Battery Backup

  • Supports half load up to 14 minutes and full load up to 4 minutes
  • Internal batteries designed for hot-swap field replacement

Switchable Outlets

  • (2) load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation(AVR)

  • Maintains 120V nominal output over input range of 83V–147V without using battery power

EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance

ENERGY STAR Certification

  • 99% line mode efficiency saves money and energy and protects environment by meeting strict EPA efficiency guidelines

LED Indicators

  • Front-panel LEDs signal power, voltage correction, load level and battery charge state

SNMP/Web Capability

  • Optional Tripp Lite SNMPWEBCARD (sold separately) permits remote management of UPS, including reboots, configuration, updates, and activity logs

Communications Ports

  • USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
  • EPO port supports emergency shutdown in large facilities

Versatile Installation Options

  • Hardware included for mounting in 1RU of EIA-standard 19" 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory (sold separately) available for extra support in 4-post installations

TAA Compliant

  • Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases

NOTE: For technical specifications, please view the data sheet located on the Documentation tab

Power Strip, 15' Cord
Tripp Lite PDU1215 Power Strip, 15' Cord
Tripp Lite's PDU1215 AC power distribution unit offers 15 amp, 120 volt capacity in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for wallmount, under-counter or 1U/0U rackmount installation. Uses only 1 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM