Rane RAD16Z
Remote Audio Device, Surface Mount

OUR PART #  RAD16Z


A RAD16z provides an alternative to standard switchboxes for areas in which a switchbox is impractical, such as in stage floor pockets or above ceilings. It contains 2 balanced Mic / Line / Line-Plus inputs and 2 balanced line outputs on Euroblock connectors. Line-Plus allows a stereo unbalanced source to connect to a single balanced input and be mono’ed. Inputs are individually software switchable to
Mic, Line or Line-Plus. 24 V phantom power can be enabled in software for a condenser mic. LEDs indicate input mode, Input and Output level, as well as RAD connectivity to the HAL.

Two Logic Inputs and Outputs interface other devices to HAL with toggles or commands, such as push-to-talk or mute switches, projectors, lights, alarms, etc. Logic In connects a device contact switch between pin 1 or 2 to ground. Logic Outs are 5 V high or 0 V low.

Galvanic isolation prevents current flow between the RAD and host technical grounds from interfering with audio. The Euro connections accept wire between 30 and 14 AWG.

The RAD16z is only available in black. Mountable to any flat surface, it measures 4.92" x 3.31" x 1.05" (12.5 x 8.4 x 2.7 cm).

Rane RAD16Z Features:

  • Universal Mic / Line / Line-Plus Inputs
  • Adds 2 Logic Inputs and 2 Logic Outputs
  • Power on/off transient suppression
  • 500 V galvanic isolation

Rane RAD16Z
Remote Audio Device, Surface Mount

OUR PART #  RAD16Z

Product Information:

A RAD16z provides an alternative to standard switchboxes for areas in which a switchbox is impractical, such as in stage floor pockets or above ceilings. It contains 2 balanced Mic / Line / Line-Plus inputs and 2 balanced line outputs on Euroblock connectors. Line-Plus allows a stereo unbalanced source to connect to a single balanced input and be mono’ed. Inputs are individually software switchable to
Mic, Line or Line-Plus. 24 V phantom power can be enabled in software for a condenser mic. LEDs indicate input mode, Input and Output level, as well as RAD connectivity to the HAL.

Two Logic Inputs and Outputs interface other devices to HAL with toggles or commands, such as push-to-talk or mute switches, projectors, lights, alarms, etc. Logic In connects a device contact switch between pin 1 or 2 to ground. Logic Outs are 5 V high or 0 V low.

Galvanic isolation prevents current flow between the RAD and host technical grounds from interfering with audio. The Euro connections accept wire between 30 and 14 AWG.

The RAD16z is only available in black. Mountable to any flat surface, it measures 4.92" x 3.31" x 1.05" (12.5 x 8.4 x 2.7 cm).

Rane RAD16Z Features:

  • Universal Mic / Line / Line-Plus Inputs
  • Adds 2 Logic Inputs and 2 Logic Outputs
  • Power on/off transient suppression
  • 500 V galvanic isolation
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM