Lewitt LCT640 TS
Multi-Pattern, Dual Output Condenser Microphone

OUR PART #  LCT640-TS


Lewitt's LCT 640 TS, designed and engineered in Austria, will revolutionize the way we approach the recording process. Set to Dual Output Mode, the signal of the mic's front and back diaphragm is provided by independent circuitries, so any type of polar pattern can be realized dynamically - even after recording. Previously recorded material can be changed dynamically by adjusting the polar pattern - room sound can be added or decreased, even by 180°. ?After recording with the LCT 640 TS you can use LEWITT’s Polarizer plugin to tweak the material with incredible ease of use. In Multi-Pattern Mode the LCT 640 TS has all the well-known characteristics of a great sounding studio multi-pattern condenser mic. It features 5 polar patterns: omni, wide cardioid, cardioid, supercardioid, and figure-8. Perfect Match technology takes care that all LCT 640 TS have the exact same sensitivity at 1 kHz. The Dual Output Mode allows to record in stereo with only a single LCT 640 TS - usually only accomplished using 2 microphones. Clipping History, 4 low-cut and pre-attenuation settings round off the outstanding feature list of the LCT 640 TS. The LCT 640 TS opens doors to a whole new world of recording techniques.

Mid-Side Stereo
The ability to record "Mid Side" stereo with only one LCT 640 TS is another possibility. Musicians and engineers just have to point the side of the microphone to the source they want to record. The front capsule then serves as the left-side channel while the back capsule serves as the right side. Summing both signals together creates the mid-channel.

Lewitt LCT 640 TS Includes:

  • LCT 640 TS microphone
  • Shock mount
  • Magnetic pop filter
  • Protective case

Lewitt LCT 640 TS Features:

  • Polarizer plugin to fine-tune the polar pattern
  • Dual Output Mode - all polar patterns at any time
  • Multi-Pattern Mode - 5 polar patterns
  • Clipping Indicator and Clipping History

Lewitt LCT 640 TS Specifications:

  • Type: Condenser, externally polarized
  • Acoustical operating principle: Pressure gradient transducer
  • Diaphragm: 3 micron gold sputtered Mylar
  • Transducer Ø: 1" (25.4mm)
  • Polar pattern (Dual Output Mode): Create any polar pattern in post-production
  • Polar pattern (Multi-Pattern Mode): omni, wide cardioid, cardioid, supercardioid, figure-8
  • Sensitivity:
    • 31.4 mV/Pa, -30.1 dBV/Pa (cardioid)
    • 30.3 mV/Pa, -30.3 dBV/Pa (omni)
    • 34.1 mV/Pa, -29.4 dBV/Pa (figure-8)
  • Equivalent noise level: 10.5 dB (A), cardioid
  • Max. SPL for 0.5 % THD: 133.8 dBSPL, 0 dB pre-attenuation
  • Signal / noise ratio: 83.5 dB (A)
  • Dynamic range: 123.3 dB (A)
  • Pre-attenuation pad
    • 0 dB
    • -6 dB
    • -12 dB
    • -18 dB
  • Low-cut filter:
    • linear 
    • 40 Hz (12 dB/oct)
    • 80 Hz (12 dB/oct)
    • 160 Hz (6 dB/oct)
  • Internal impedance: 110 Ohms
  • Rated load impedance: 1,000 Ohms
  • Supply voltage: 48 V +/- 4 V
  • Current consumption: 5.1 mA
  • Mic enclosure: Zinc die cast
  • Connector: Gold-plated 3-pin XLR + Mini 3-pin XLR
  • Dimensions: 6.22" x 2.04" x 1.42" (158 x 52 x 36 mm)
  • Microphone Net Weight: 14.9 oz. (425 g)

Notes:
Microphones measured according to: IEC 60268-4
Phantom power according to: IEC 61938
Noise measurement according to: IEC 60268-1

Shock Mount
Lewitt LCT 40 SHx Shock Mount
The LCT 40 SHx from Lewitt is a shock mount for studio microphones. It's made to attenuate noise, shock, and vibration transmitted through mic stands, booms, and mounts. Also, it features a quick-acting screw thread closure ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
LCT 640 TS Adapter Cable
Lewitt LCT 40 TS LCT 640 TS Adapter Cable
The LCT 40 TS is a Lewitt proprietary connector to standard Neutrik 3-pin male XLR cable, required for use with the LCT 640 TS microphone (sold separately) when in Dual Output Mode is needed.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Lewitt LCT640 TS
Multi-Pattern, Dual Output Condenser Microphone

OUR PART #  LCT640-TS

Product Information:

Lewitt's LCT 640 TS, designed and engineered in Austria, will revolutionize the way we approach the recording process. Set to Dual Output Mode, the signal of the mic's front and back diaphragm is provided by independent circuitries, so any type of polar pattern can be realized dynamically - even after recording. Previously recorded material can be changed dynamically by adjusting the polar pattern - room sound can be added or decreased, even by 180°. ?After recording with the LCT 640 TS you can use LEWITT’s Polarizer plugin to tweak the material with incredible ease of use. In Multi-Pattern Mode the LCT 640 TS has all the well-known characteristics of a great sounding studio multi-pattern condenser mic. It features 5 polar patterns: omni, wide cardioid, cardioid, supercardioid, and figure-8. Perfect Match technology takes care that all LCT 640 TS have the exact same sensitivity at 1 kHz. The Dual Output Mode allows to record in stereo with only a single LCT 640 TS - usually only accomplished using 2 microphones. Clipping History, 4 low-cut and pre-attenuation settings round off the outstanding feature list of the LCT 640 TS. The LCT 640 TS opens doors to a whole new world of recording techniques.

Mid-Side Stereo
The ability to record "Mid Side" stereo with only one LCT 640 TS is another possibility. Musicians and engineers just have to point the side of the microphone to the source they want to record. The front capsule then serves as the left-side channel while the back capsule serves as the right side. Summing both signals together creates the mid-channel.

Lewitt LCT 640 TS Includes:

  • LCT 640 TS microphone
  • Shock mount
  • Magnetic pop filter
  • Protective case

Lewitt LCT 640 TS Features:

  • Polarizer plugin to fine-tune the polar pattern
  • Dual Output Mode - all polar patterns at any time
  • Multi-Pattern Mode - 5 polar patterns
  • Clipping Indicator and Clipping History

Lewitt LCT 640 TS Specifications:

  • Type: Condenser, externally polarized
  • Acoustical operating principle: Pressure gradient transducer
  • Diaphragm: 3 micron gold sputtered Mylar
  • Transducer Ø: 1" (25.4mm)
  • Polar pattern (Dual Output Mode): Create any polar pattern in post-production
  • Polar pattern (Multi-Pattern Mode): omni, wide cardioid, cardioid, supercardioid, figure-8
  • Sensitivity:
    • 31.4 mV/Pa, -30.1 dBV/Pa (cardioid)
    • 30.3 mV/Pa, -30.3 dBV/Pa (omni)
    • 34.1 mV/Pa, -29.4 dBV/Pa (figure-8)
  • Equivalent noise level: 10.5 dB (A), cardioid
  • Max. SPL for 0.5 % THD: 133.8 dBSPL, 0 dB pre-attenuation
  • Signal / noise ratio: 83.5 dB (A)
  • Dynamic range: 123.3 dB (A)
  • Pre-attenuation pad
    • 0 dB
    • -6 dB
    • -12 dB
    • -18 dB
  • Low-cut filter:
    • linear 
    • 40 Hz (12 dB/oct)
    • 80 Hz (12 dB/oct)
    • 160 Hz (6 dB/oct)
  • Internal impedance: 110 Ohms
  • Rated load impedance: 1,000 Ohms
  • Supply voltage: 48 V +/- 4 V
  • Current consumption: 5.1 mA
  • Mic enclosure: Zinc die cast
  • Connector: Gold-plated 3-pin XLR + Mini 3-pin XLR
  • Dimensions: 6.22" x 2.04" x 1.42" (158 x 52 x 36 mm)
  • Microphone Net Weight: 14.9 oz. (425 g)

Notes:
Microphones measured according to: IEC 60268-4
Phantom power according to: IEC 61938
Noise measurement according to: IEC 60268-1

Shock Mount
Lewitt LCT 40 SHx Shock Mount
The LCT 40 SHx from Lewitt is a shock mount for studio microphones. It's made to attenuate noise, shock, and vibration transmitted through mic stands, booms, and mounts. Also, it features a quick-acting screw thread closure ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
LCT 640 TS Adapter Cable
Lewitt LCT 40 TS LCT 640 TS Adapter Cable
The LCT 40 TS is a Lewitt proprietary connector to standard Neutrik 3-pin male XLR cable, required for use with the LCT 640 TS microphone (sold separately) when in Dual Output Mode is needed.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM