DPA Microphones 4006ER
d:dicate™ Omnidirectional Mic with Rear Cable, XLR Connector

OUR PART #  4006-ER


The DPA Microphones 4006ER features an integrated cable solution with rear cable entry. These microphones are particularly popular in concert halls; it can be mounted, hung, or concealed to create clean, transparent recordings. The SM4000 Suspension Mount is included in the package, allowing it to be hung from the ceiling for precision spot-miking of orchestra sections or atmospheric ambience. The MMC4006 Omnidirectional Microphone Capsule offers total sonic transparency in virtually any recording situation. It picks up incredible sound detail and depth, and its high-frequency definition characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor, and extremely linear frequency response from 10 to 20 kHz (+/- 2 dB).

DPA Microphones 4006ER Features:

  • Ultra-compact recording mic for hanging applications
  • Full-bodied sound with minimal visual impact
  • Legendary recording reference capsule
  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Detailed and natural reproduction
  • High sensitivity and low noise floor
  • Excellent for concert halls and spot miking acoustical instruments
  • Modular flexibility

DPA Microphones 4006ER Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 20 kHz
  • Frequency range, +/- 2 dB: 20 Hz - 20 kHz
  • Sensitivity, nominal, +/- 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 132 dB SPL peak
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 132 dB
  • Output impedance: 100 Ohms
  • Minimum load impedance: 2 kOhms
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power supply (for full specifications): 48 V Phantom power (+/- 4 V)
  • Current consumption: 3.5 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 4 oz. (114g)
  • Microphone diameter: 0.6 - 0.75" (16-19mm)
  • Capsule diameter: 0.6" (16mm)
  • Microphone length: 1.38" (35mm)
  • Output voltage, RMS: 2.2 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 to +113° F (-40 to +45° C)
  • Relative Humidity (RH): Up to 90%

DPA Microphones 4006ER
d:dicate™ Omnidirectional Mic with Rear Cable, XLR Connector

OUR PART #  4006-ER

Product Information:

The DPA Microphones 4006ER features an integrated cable solution with rear cable entry. These microphones are particularly popular in concert halls; it can be mounted, hung, or concealed to create clean, transparent recordings. The SM4000 Suspension Mount is included in the package, allowing it to be hung from the ceiling for precision spot-miking of orchestra sections or atmospheric ambience. The MMC4006 Omnidirectional Microphone Capsule offers total sonic transparency in virtually any recording situation. It picks up incredible sound detail and depth, and its high-frequency definition characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor, and extremely linear frequency response from 10 to 20 kHz (+/- 2 dB).

DPA Microphones 4006ER Features:

  • Ultra-compact recording mic for hanging applications
  • Full-bodied sound with minimal visual impact
  • Legendary recording reference capsule
  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Detailed and natural reproduction
  • High sensitivity and low noise floor
  • Excellent for concert halls and spot miking acoustical instruments
  • Modular flexibility

DPA Microphones 4006ER Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 20 kHz
  • Frequency range, +/- 2 dB: 20 Hz - 20 kHz
  • Sensitivity, nominal, +/- 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 132 dB SPL peak
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 132 dB
  • Output impedance: 100 Ohms
  • Minimum load impedance: 2 kOhms
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power supply (for full specifications): 48 V Phantom power (+/- 4 V)
  • Current consumption: 3.5 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 4 oz. (114g)
  • Microphone diameter: 0.6 - 0.75" (16-19mm)
  • Capsule diameter: 0.6" (16mm)
  • Microphone length: 1.38" (35mm)
  • Output voltage, RMS: 2.2 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 to +113° F (-40 to +45° C)
  • Relative Humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM