DPA Microphones SC4071-W10
Mini Omnidirectional Lavalier Microphone, White, Wired for Shure

OUR PART #  SC4071-W10


The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost adapts to your needs. With eminent sound quality, a large range of accessories and adapters available for all pro wireless systems, this miniature condenser mic is the obvious choice for any application requiring a big sound and a small footprint.

The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost is a quality speech and vocal mic. It makes voice heard and intelligible. It is also resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the mic capsule so the built-in preamplifier (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.

Another equally important consideration is that when placing a microphone on the body, especially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost has a built-in boost to compensate for this loss. Especially for ENG work, this mic is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.

SC4071-W10 Features:

  • Rugged and reliable
  • Exceptional audio quality
  • Low noise and high sensitivity
  • Large selection of accessories
  • Modular adapter system fits most professional wireless systems

SC4071-W10 Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser element withvertical diaphragm
  • Frequency range, +/- 2 dB: 100 Hz - 15 kHz with typ.5 dB soft boost at 4 - 6 kHz
  • Sensitivity, nominal, +/- 3 dB at 1 kHz: 6 mV/Pa ved1 kHz; -44.4 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re.20 micropascal (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): 68 dB(A)
  • Total Harmonic Distortion (THD): < 1 % THD up to123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine
  • Dynamic range: Typ. 97 dB
  • Maximum SPL, peak before clipping: 144 dB
  • Output impedance: 30 - 40 Ohms
  • Cable drive capability: Up to 300 m (984 ft)
  • Power supply (for full performance): For wirelesssystems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001
  • BC/DAD6024/DAD4099: 48 V phantom power +/- 4 V forfull performance.
  • Connector: MicroDot
  • Color: white (also available in black or beige)
  • Weight: 7.5 g (0.26 oz) includes cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 17 mm (0.67 in)
  • Cable length: 1.8 m (5.9 ft)
  • Polarity: Positively increasing sound pressureproduces positive going voltage on MicroDot pin
  • Temperature range: -10 to 45°C (14 to 113°F)
MicroDot Extension Cable, 2.2 mm, 16.4 ft, White
DPA Microphones CM2250W00 MicroDot Extension Cable, 2.2 mm, 16.4 ft, White
DPA's CM2250W00 is a 16.4-foot heavy-duty, 2.2 mm diameter, minature microphone cable with a MicroDot connector. NOTE: The image above is shows the cable is black. Actual product comes in white.

Usually ships in 7-14 business days.
Need it sooner? Call us!

DPA Microphones SC4071-W10
Mini Omnidirectional Lavalier Microphone, White, Wired for Shure

OUR PART #  SC4071-W10

Product Information:

The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost adapts to your needs. With eminent sound quality, a large range of accessories and adapters available for all pro wireless systems, this miniature condenser mic is the obvious choice for any application requiring a big sound and a small footprint.

The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost is a quality speech and vocal mic. It makes voice heard and intelligible. It is also resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the mic capsule so the built-in preamplifier (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.

Another equally important consideration is that when placing a microphone on the body, especially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost has a built-in boost to compensate for this loss. Especially for ENG work, this mic is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.

SC4071-W10 Features:

  • Rugged and reliable
  • Exceptional audio quality
  • Low noise and high sensitivity
  • Large selection of accessories
  • Modular adapter system fits most professional wireless systems

SC4071-W10 Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser element withvertical diaphragm
  • Frequency range, +/- 2 dB: 100 Hz - 15 kHz with typ.5 dB soft boost at 4 - 6 kHz
  • Sensitivity, nominal, +/- 3 dB at 1 kHz: 6 mV/Pa ved1 kHz; -44.4 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re.20 micropascal (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB(max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): 68 dB(A)
  • Total Harmonic Distortion (THD): < 1 % THD up to123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine
  • Dynamic range: Typ. 97 dB
  • Maximum SPL, peak before clipping: 144 dB
  • Output impedance: 30 - 40 Ohms
  • Cable drive capability: Up to 300 m (984 ft)
  • Power supply (for full performance): For wirelesssystems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001
  • BC/DAD6024/DAD4099: 48 V phantom power +/- 4 V forfull performance.
  • Connector: MicroDot
  • Color: white (also available in black or beige)
  • Weight: 7.5 g (0.26 oz) includes cable and MicroDotconnector
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 17 mm (0.67 in)
  • Cable length: 1.8 m (5.9 ft)
  • Polarity: Positively increasing sound pressureproduces positive going voltage on MicroDot pin
  • Temperature range: -10 to 45°C (14 to 113°F)
MicroDot Extension Cable, 2.2 mm, 16.4 ft, White
DPA Microphones CM2250W00 MicroDot Extension Cable, 2.2 mm, 16.4 ft, White
DPA's CM2250W00 is a 16.4-foot heavy-duty, 2.2 mm diameter, minature microphone cable with a MicroDot connector. NOTE: The image above is shows the cable is black. Actual product comes in white.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM