Lab Gruppen E12-2 Amplifier
2 channel 2x600W

OUR PART #  E12-2

Log In for price!

Don't have an account? Apply today!

In designing the new E Series, Lab.gruppen engineers drew upon the cutting-edge amplifier design philosophies developed for the flagship PLM™ 20000Q Powered Loudspeaker Management system, evolving these to create new circuit topologies and control features to meet the demands of 21st century AV installations. The result is a new amplifier platform called IDEEA: IntelliDrive Energy Efficient Amplifier. The principal design challenge was maintaining Lab.gruppen’s impeccable sonic performance and robust power output while meeting – or exceeding – the rigorous efficiency requirements of Energy Star 2.1 certification. The challenge was met on two fronts: reducing current draw during operating cycles with vigorous program material and high output levels, and reducing power consumption during non-operational cycles.

Lab.gruppen E12:2 Amplifier Features:

  • High power density – Up to 2 × 600 W in 1U
  • Certified Energy Star 2.1 compliant
  • Flexible – IntelliDrive delivers similar power per channel at 70 V, 2, 4, 8 and 16 ohms
  • Asymmetric loading allows “mixing and matching” of loads with different impedances to maximize both overall system efficiency and inventory utilization
  • Patented IDEEA output stage based on Class D topology
  • High efficiency – Extremely low power consumption and heat output
  • Exceptionally low cost of ownership over lifetime
  • RSL switch circuit senses rail voltage and optimizes output for instantaneous load conditions
  • Efficient cooling – One temperature-controlled fan
  • Comprehensive circuit protection and fault indication

Lab.gruppen E12:2 Amplifier Specifications:

  • Number of channels: 2
  • Max total output all channels driven: 1200W
  • Peak output voltage per channel: 100 V / 70 Vrms
  • Max output current per channel: 18 Arms
  • THD 20Hz-20kHz for 1W
  • THD at 1kHz and 1dB below chipping: <0.05%
  • Signal to noise ratio: >112dBA
  • Channel separation (crosstalk) at 1kHz: >70dB
  • Frequency response: 2Hz - 40kHz
  • Input impedance: 20 kOhms
  • Common mode rejection: 50dB
  • Output impedance: 25 mOhms
  • Connectors & switches:
    • Input: 3-pin detachable screw terminals per channel, electronically balanced
    • Output: 2-pin detachable screw terminals per channel
    • High pass filter: Fixed at 50Hz, switchable per channel
    • Power control input and output

Lab Gruppen E12-2 Amplifier
2 channel 2x600W

OUR PART #  E12-2

Product Information:

In designing the new E Series, Lab.gruppen engineers drew upon the cutting-edge amplifier design philosophies developed for the flagship PLM™ 20000Q Powered Loudspeaker Management system, evolving these to create new circuit topologies and control features to meet the demands of 21st century AV installations. The result is a new amplifier platform called IDEEA: IntelliDrive Energy Efficient Amplifier. The principal design challenge was maintaining Lab.gruppen’s impeccable sonic performance and robust power output while meeting – or exceeding – the rigorous efficiency requirements of Energy Star 2.1 certification. The challenge was met on two fronts: reducing current draw during operating cycles with vigorous program material and high output levels, and reducing power consumption during non-operational cycles.

Lab.gruppen E12:2 Amplifier Features:

  • High power density – Up to 2 × 600 W in 1U
  • Certified Energy Star 2.1 compliant
  • Flexible – IntelliDrive delivers similar power per channel at 70 V, 2, 4, 8 and 16 ohms
  • Asymmetric loading allows “mixing and matching” of loads with different impedances to maximize both overall system efficiency and inventory utilization
  • Patented IDEEA output stage based on Class D topology
  • High efficiency – Extremely low power consumption and heat output
  • Exceptionally low cost of ownership over lifetime
  • RSL switch circuit senses rail voltage and optimizes output for instantaneous load conditions
  • Efficient cooling – One temperature-controlled fan
  • Comprehensive circuit protection and fault indication

Lab.gruppen E12:2 Amplifier Specifications:

  • Number of channels: 2
  • Max total output all channels driven: 1200W
  • Peak output voltage per channel: 100 V / 70 Vrms
  • Max output current per channel: 18 Arms
  • THD 20Hz-20kHz for 1W
  • THD at 1kHz and 1dB below chipping: <0.05%
  • Signal to noise ratio: >112dBA
  • Channel separation (crosstalk) at 1kHz: >70dB
  • Frequency response: 2Hz - 40kHz
  • Input impedance: 20 kOhms
  • Common mode rejection: 50dB
  • Output impedance: 25 mOhms
  • Connectors & switches:
    • Input: 3-pin detachable screw terminals per channel, electronically balanced
    • Output: 2-pin detachable screw terminals per channel
    • High pass filter: Fixed at 50Hz, switchable per channel
    • Power control input and output
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.