Kupo KG200912
Grip Arm Support with 360° Rotation

OUR PART #  KG200912

Log In for price!

Don't have an account? Apply today!

Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.

Today Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360° for infinite flexibility and extends from 22"-30.7" (56cm-78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.

Kupo KG200912 Grip Arm Support Specifications:

  • Length: 22.88" (58.1 cm)
  • Width: 2.43" (6.18 cm)
  • Height: 1.48" (3.75 cm)
  • Weight: 1.1 lbs (0.5 kg)
  • Risers: 1
  • Sections: 2
  • Primary Material: Aluminum
  • Secondary Material: Stainless Steel Bolts
  • Minimum Jaw Diameter: 0.08" (2 mm)
  • Maximum Jaw Diameter: 0.63" (16 mm)

Kupo KG200912
Grip Arm Support with 360° Rotation

OUR PART #  KG200912

Product Information:

Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.

Today Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360° for infinite flexibility and extends from 22"-30.7" (56cm-78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.

Kupo KG200912 Grip Arm Support Specifications:

  • Length: 22.88" (58.1 cm)
  • Width: 2.43" (6.18 cm)
  • Height: 1.48" (3.75 cm)
  • Weight: 1.1 lbs (0.5 kg)
  • Risers: 1
  • Sections: 2
  • Primary Material: Aluminum
  • Secondary Material: Stainless Steel Bolts
  • Minimum Jaw Diameter: 0.08" (2 mm)
  • Maximum Jaw Diameter: 0.63" (16 mm)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM