Lewitt DGT 450
Cardioid USB Microphone for iOS, PC, Mac

OUR PART #  AMS-DGT-450


The Lewitt DGT 450 is a professional USB recording solution for PC, Mac and iOS devices. 24 bit / 96 kHz, 93 dB dynamic range, pre-attenuation and low-cut filter lay the foundations for best-in-class recordings. Featuring asynchronous USB transfer, support for OS X Core Audio and ASIO for Windows, and the option to cross-fade between zero-latency direct and tape return monitoring, it is the ideal all-in-one piece of equipment for recording vocals, instruments and live acts, and as your go-to podcast and YouTube microphone working directly on your iPhone, iPad or iPod, to name just a few possibilities.

Lewitt DGT 450 Features:

  • 24 bit / 96 kHz high-end AD/DA converter
  • 93 dB dynamic range
  • 118 dB SPL max
  • Powerful built-in powerful headphone amp
  • 2 low-cut settings
  • 2 pre-attenuation settings
  • Asynchronous USB transfer
  • Micro-USB-powered

Lewitt DGT 450 Specifications:

  • Microphone
    • Type: Condenser, permanently polarized
    • Acoustical operating principle: Pressure gradient transducer
    • Transducer Ø: 0.67" (17mm)
    • Polar pattern: Cardioid
    • Frequency range: 50 ... 20,000 Hz
    • Dynamic range: 93 dB (A)
    • Pre-attenuation pad
      • 0 dB
      • -10 dB
    • Low-cut filter
      • linear
      • 80 Hz (12 dB/oct)
    • Front to back ratio at 1kHz: >/= 15 dB (A)
    • Sensitivity at 1 kHz: - 24 dBFS
    • Analog gain range: 0 ... 44 dB
    • Equivalent noise level: 25 dB (A)
    • Max. SPL for 0.5 %
    • THD: 118 dB SPL, 0 dB pre-attenuation
  • General
    • Resolution: 24 Bit
    • Sample rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
    • Recording modes: Cardioid/Cardioid + Line-in
    • Supply voltage (DGT): on iOS additional 5V/500mA, micro-USB power supply required
    • Connector: USB to 18-pin lockable hi-speed connector
  • Line-in
    • Input impedance: > 1 MOhm
    • Full scale input voltage (0 dB gain): 0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
    • Input dynamic range: >/= 96 dB (A)
    • Frequency response: 20 ... 20,000 Hz
    • Operating principle: Mono line input
    • Analog gain range: 0 ... 12 dB
  • Headphones
    • Headphone output power
      • 20 mW at 16 Ohm, THD+N < 0.5%
      • 16 mW at 32 Ohm, THD+N < 0.5%
    • Frequency response: 20 ... 20,000 Hz
    • Headphone volume control: - 60 dB ... 0 dB
Studio Microphone Shock Mount
Lewitt LCT 40 SH Studio Microphone Shock Mount
Lewitt's LCT 40 SH is a shock mount for select studio microphones (see below for compatibility). It's designed to attenuate noise, shock, and vibration transmitted through mic stands, booms, and mounts. It features a quick-acting ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Lewitt DGT 450
Cardioid USB Microphone for iOS, PC, Mac

OUR PART #  AMS-DGT-450

Product Information:

The Lewitt DGT 450 is a professional USB recording solution for PC, Mac and iOS devices. 24 bit / 96 kHz, 93 dB dynamic range, pre-attenuation and low-cut filter lay the foundations for best-in-class recordings. Featuring asynchronous USB transfer, support for OS X Core Audio and ASIO for Windows, and the option to cross-fade between zero-latency direct and tape return monitoring, it is the ideal all-in-one piece of equipment for recording vocals, instruments and live acts, and as your go-to podcast and YouTube microphone working directly on your iPhone, iPad or iPod, to name just a few possibilities.

Lewitt DGT 450 Features:

  • 24 bit / 96 kHz high-end AD/DA converter
  • 93 dB dynamic range
  • 118 dB SPL max
  • Powerful built-in powerful headphone amp
  • 2 low-cut settings
  • 2 pre-attenuation settings
  • Asynchronous USB transfer
  • Micro-USB-powered

Lewitt DGT 450 Specifications:

  • Microphone
    • Type: Condenser, permanently polarized
    • Acoustical operating principle: Pressure gradient transducer
    • Transducer Ø: 0.67" (17mm)
    • Polar pattern: Cardioid
    • Frequency range: 50 ... 20,000 Hz
    • Dynamic range: 93 dB (A)
    • Pre-attenuation pad
      • 0 dB
      • -10 dB
    • Low-cut filter
      • linear
      • 80 Hz (12 dB/oct)
    • Front to back ratio at 1kHz: >/= 15 dB (A)
    • Sensitivity at 1 kHz: - 24 dBFS
    • Analog gain range: 0 ... 44 dB
    • Equivalent noise level: 25 dB (A)
    • Max. SPL for 0.5 %
    • THD: 118 dB SPL, 0 dB pre-attenuation
  • General
    • Resolution: 24 Bit
    • Sample rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
    • Recording modes: Cardioid/Cardioid + Line-in
    • Supply voltage (DGT): on iOS additional 5V/500mA, micro-USB power supply required
    • Connector: USB to 18-pin lockable hi-speed connector
  • Line-in
    • Input impedance: > 1 MOhm
    • Full scale input voltage (0 dB gain): 0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
    • Input dynamic range: >/= 96 dB (A)
    • Frequency response: 20 ... 20,000 Hz
    • Operating principle: Mono line input
    • Analog gain range: 0 ... 12 dB
  • Headphones
    • Headphone output power
      • 20 mW at 16 Ohm, THD+N < 0.5%
      • 16 mW at 32 Ohm, THD+N < 0.5%
    • Frequency response: 20 ... 20,000 Hz
    • Headphone volume control: - 60 dB ... 0 dB
Studio Microphone Shock Mount
Lewitt LCT 40 SH Studio Microphone Shock Mount
Lewitt's LCT 40 SH is a shock mount for select studio microphones (see below for compatibility). It's designed to attenuate noise, shock, and vibration transmitted through mic stands, booms, and mounts. It features a quick-acting ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM