DPA Microphones FA2006VDPAB
d:facto Interview Microphone with DPA Handle for Wired Omnidirectional

OUR PART #  FA2006VDPAB


The FA2006VDPAB from DPA is a d:facto™ handheld interview microphone that is for wired (XLR) use that comes in the color black. This professional broadcast provides outstanding voice clarity, linearity and low noise. Wind and handling noise rejection is superior to competing microphones straight out of the box. And, in most cases, you will not need the extra foam windscreens or fur windjammers.

The phantom-powered DPA handle has a sleek look and state-of-the-art electronic design. And, if you decide to go wireless, you can just switch to an adapter for wireless systems at a quarter of the cost of a new d:facto™ microphone. The modular nature of the d:facto™ series allows you to replace both the capsule as well as the adapter.

The d:facto™ Twin Diaphragm Omnidirectional Microphone Capsule is a linear omnidirectional mic capsule optimized for broadcast interviews. This design is a special twin-diaphragm omnidirectional capsule. It is built out of two d:screet™ miniature capsules mounted back-to-back. The well-known sonic signature of these tiny capsules secures high consistency and frequency neutrality. You can remove the capsule and replace it with any other d:facto™ capsule if your needs change.

The mic also features a robust three-stage pop protection grid built into the microphone that removes unwanted noise.

Although this version of the d:facto™ Interview Microphone comes with a d:facto™ Handle for a wired solution, the d:facto™ Interview Microphone is also an ideal option to use with your favorite wireless system. 

DPA FA2006VDPAB Features: 

  • Extraordinarily natural sound
  • Best suppression of wind and handling noise
  • Freedom to move – directional precision less critical
  • Extremely low handling noise
  • Sleek design
  • Flexible adapter system fits most professional wireless systems

DPA FA2006VDPAB Specifications:

  • Product ID: FA2006VDPAB
  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz, permanent thirdorder high pass filter at 80 Hz
  • Frequency range, ±2 dB: 100 Hz - 20 kHz with typ. 3dB soft boost at 14 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB (A) re.20 µPa (max. 18 dB (A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 78 dB (A)
  • Total harmonic distortion (THD): < 1% up to 130 dBSPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, peak before clipping: 154 dB
  • Output impedance: 100 ohm
  • Minimum load impedance: 1 k ohm
  • Cable drive capability: 328 ft (100m)
  • Output balance principle: Impedance balancing with Active Drive
  • Common mode rejection ratio (CMRR): > 50 dB at 1kHz
  • Power supply (for full performance): 48 V Phantom power (± 4 V)
  • Current consumption: Max. 2 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal +phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 11 oz (311 g)
  • Microphone diameter: 2.05 in (52mm)
  • Capsule diameter: 0.75 in (19mm)
  • Microphone length: 8.1 in (205mm)
  • Maximum output voltage, RMS: 8 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°F to 113°F (-40°C to 45°C)
  • Relative humidity (RH): Up to 90%

DPA Microphones FA2006VDPAB
d:facto Interview Microphone with DPA Handle for Wired Omnidirectional

OUR PART #  FA2006VDPAB

Product Information:

The FA2006VDPAB from DPA is a d:facto™ handheld interview microphone that is for wired (XLR) use that comes in the color black. This professional broadcast provides outstanding voice clarity, linearity and low noise. Wind and handling noise rejection is superior to competing microphones straight out of the box. And, in most cases, you will not need the extra foam windscreens or fur windjammers.

The phantom-powered DPA handle has a sleek look and state-of-the-art electronic design. And, if you decide to go wireless, you can just switch to an adapter for wireless systems at a quarter of the cost of a new d:facto™ microphone. The modular nature of the d:facto™ series allows you to replace both the capsule as well as the adapter.

The d:facto™ Twin Diaphragm Omnidirectional Microphone Capsule is a linear omnidirectional mic capsule optimized for broadcast interviews. This design is a special twin-diaphragm omnidirectional capsule. It is built out of two d:screet™ miniature capsules mounted back-to-back. The well-known sonic signature of these tiny capsules secures high consistency and frequency neutrality. You can remove the capsule and replace it with any other d:facto™ capsule if your needs change.

The mic also features a robust three-stage pop protection grid built into the microphone that removes unwanted noise.

Although this version of the d:facto™ Interview Microphone comes with a d:facto™ Handle for a wired solution, the d:facto™ Interview Microphone is also an ideal option to use with your favorite wireless system. 

DPA FA2006VDPAB Features: 

  • Extraordinarily natural sound
  • Best suppression of wind and handling noise
  • Freedom to move – directional precision less critical
  • Extremely low handling noise
  • Sleek design
  • Flexible adapter system fits most professional wireless systems

DPA FA2006VDPAB Specifications:

  • Product ID: FA2006VDPAB
  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz, permanent thirdorder high pass filter at 80 Hz
  • Frequency range, ±2 dB: 100 Hz - 20 kHz with typ. 3dB soft boost at 14 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB (A) re.20 µPa (max. 18 dB (A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL): Typ. 78 dB (A)
  • Total harmonic distortion (THD): < 1% up to 130 dBSPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, peak before clipping: 154 dB
  • Output impedance: 100 ohm
  • Minimum load impedance: 1 k ohm
  • Cable drive capability: 328 ft (100m)
  • Output balance principle: Impedance balancing with Active Drive
  • Common mode rejection ratio (CMRR): > 50 dB at 1kHz
  • Power supply (for full performance): 48 V Phantom power (± 4 V)
  • Current consumption: Max. 2 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal +phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 11 oz (311 g)
  • Microphone diameter: 2.05 in (52mm)
  • Capsule diameter: 0.75 in (19mm)
  • Microphone length: 8.1 in (205mm)
  • Maximum output voltage, RMS: 8 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°F to 113°F (-40°C to 45°C)
  • Relative humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM