Ashdown Engineering RM-C115-420
Rootmaster Series 420W 1x15" Bass Combo Amplifier

OUR PART #  RMMAGC115420-DIS-01


The Ashdown Engineering RM-C115-420 features a comprehensive preamp with a classic 5-band EQ, a compressor, plus  footswitchable Drive and Sub Harmonic effects. A Class D power section helps to keep the weight down.  Other features include a mini jack auxiliary input with level control, FX loop, XLR DI, Speakon/Jack combination out and a jack input for an (optional) FS-2 footswitch. Its payload is delivered via a single Ashdown 15" speaker.

NOTE: This product was on display in our retail store and has been additionally discounted. Please contact your Sales Pro for more information on this and other products.

Ashdown Engineering RM-C115-420 Specifications:

  • Power Output: 420 Watt RMS
  • Power Handling: 230 Volt
  • Speaker Configuration: 1x 15"
  • Speaker Outputs: 2x Jack Sockets
  • Frequency Response: -3dB @17 Hz and 30 kHz
  • High Instrument Input: impedance 3.9 mOhms, input range 150mV - 20mV p-p
  • Low Instrument Input: Impedance 10 kOhms / Input range 300mV - 40V p-p
  • Line Input: Impedance 10 kOhms, Level 0 dBu Nominal
  • DI Output: 600 Ohm balanced / Level -20 dBu nominal
  • Tuner Output: impedance 22 kOhms / Level 0 dBu nominal
  • Impedance: 8 Ohm
  • Output Impedance: Minimum 4 Ohm
  • Signal to noise: Better than 80dB (EQ flat)
  • EQ: Bass ±15dB @ 100 Hz Lo Mid ±15 dB @ 220 Hz Middle ±15 dB @ 660 Hz Hi Mid ±15 dB @ 1.6 kHz Treble ±15 dB @ 7 kHz shelving Deep +
  • Effects Send: Impedance 22 kOhm / Level 0 dBu nominal
  • Effects Return: Impedance 22 kOhm / Level 0 dBu nominal
  • Distortion: Less than 0.5% THD
  • Dimensions (HxWxD): 603 x 468 x 335 mm
  • Weight: 22 kg

Ashdown Engineering RM-C115-420
Rootmaster Series 420W 1x15" Bass Combo Amplifier

OUR PART #  RMMAGC115420-DIS-01

Product Information:

The Ashdown Engineering RM-C115-420 features a comprehensive preamp with a classic 5-band EQ, a compressor, plus  footswitchable Drive and Sub Harmonic effects. A Class D power section helps to keep the weight down.  Other features include a mini jack auxiliary input with level control, FX loop, XLR DI, Speakon/Jack combination out and a jack input for an (optional) FS-2 footswitch. Its payload is delivered via a single Ashdown 15" speaker.

NOTE: This product was on display in our retail store and has been additionally discounted. Please contact your Sales Pro for more information on this and other products.

Ashdown Engineering RM-C115-420 Specifications:

  • Power Output: 420 Watt RMS
  • Power Handling: 230 Volt
  • Speaker Configuration: 1x 15"
  • Speaker Outputs: 2x Jack Sockets
  • Frequency Response: -3dB @17 Hz and 30 kHz
  • High Instrument Input: impedance 3.9 mOhms, input range 150mV - 20mV p-p
  • Low Instrument Input: Impedance 10 kOhms / Input range 300mV - 40V p-p
  • Line Input: Impedance 10 kOhms, Level 0 dBu Nominal
  • DI Output: 600 Ohm balanced / Level -20 dBu nominal
  • Tuner Output: impedance 22 kOhms / Level 0 dBu nominal
  • Impedance: 8 Ohm
  • Output Impedance: Minimum 4 Ohm
  • Signal to noise: Better than 80dB (EQ flat)
  • EQ: Bass ±15dB @ 100 Hz Lo Mid ±15 dB @ 220 Hz Middle ±15 dB @ 660 Hz Hi Mid ±15 dB @ 1.6 kHz Treble ±15 dB @ 7 kHz shelving Deep +
  • Effects Send: Impedance 22 kOhm / Level 0 dBu nominal
  • Effects Return: Impedance 22 kOhm / Level 0 dBu nominal
  • Distortion: Less than 0.5% THD
  • Dimensions (HxWxD): 603 x 468 x 335 mm
  • Weight: 22 kg
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM