Aphex 120B
1x4 Distribution Amplifier, 220 Volt

OUR PART #  120B-220V


The Aphex Model 120B is a high performance audio distribution amplifier with a single high impedance input and four low impedance outputs, all electronically servo-balanced and designed to be as transparent as possible. The 120's transformerless circuits are designed for wide, flat frequency response, free from ringing or overshoot, making it ideal for distribution of time code or audio. Each output has its own amplifier and level control for maximum versatility and isolation. The sturdy steel chassis may be used stand-alone or rackmounted, singly or in pairs.

Input

The input circuit is adjusted for optimal common-mode rejection. Servo-balancing compensates for high common-mode voltages, so headroom isn't sacrificed. The high input impedance allows bridging of the input signal with minimum loading. This way several amplifiers can be easily driven from the source.

Outputs

The individual output amplifiers are very low impedance so long lines and capacitive loads are easily driven with no loss of stability or high frequency response. Servo-balancing permits the outputs to be used single-ended at any time without a change in gain by simply grounding the unused pin. Individual output level controls are recessed for bump-proof operation, yet can be easily adjusted without tools. The front panel power LED also acts as a signal present and clip indicator for the input.

Aphex 120B Features:

  • 1 input, 4 output with output trim adjustments
  • Transformerless design for wide, flat frequency response
  • Works for audio or time code

Aphex 120B Specifications:

  • Audio:
    • Frequency Response: 5 Hz - 100 kHz (+0, -0.5 dB)
    • Dynamic Range: 94 dB
    • Hum and Noise: Better than -90 dBm at unity gain
    • THD: 0.002% @ + 4 dBm, 0.005% @ +20 dBm
    • IMD: 0.002% @ +10 dBm
    • Channel Isolation: 70 dB
    • Slew Rate: 13 V/usec
  • Input:
    • Connector: XLR 3-pin Female
    • Type: Transformerless, differential servo balanced
    • Impedance: 100 k ohms balanced
    • Maximum Level: +25 dBm
    • CMRR (typical): > 45 dB
  • Output:
    • Connector: XLR 3-pin Male
    • Impedance: 65 ohms
    • Maximum Level: + 25 dBm into 600 ohms balanced, +21 dBm unbalanced
    • Output Gain Range: +/- 15 dB
  • Other Specifications:
    • Power Requirements: 100, 120, 220, OR 240 VAC, 50-60Hz
    • Dimensions (H x W x D): 1.75 x 8.25 x 7.25" (44.5 x 209.5 x 184.2 mm)
    • Net Weight: 3.5 lbs (1.6 kg)

Aphex 120B
1x4 Distribution Amplifier, 220 Volt

OUR PART #  120B-220V

Product Information:

The Aphex Model 120B is a high performance audio distribution amplifier with a single high impedance input and four low impedance outputs, all electronically servo-balanced and designed to be as transparent as possible. The 120's transformerless circuits are designed for wide, flat frequency response, free from ringing or overshoot, making it ideal for distribution of time code or audio. Each output has its own amplifier and level control for maximum versatility and isolation. The sturdy steel chassis may be used stand-alone or rackmounted, singly or in pairs.

Input

The input circuit is adjusted for optimal common-mode rejection. Servo-balancing compensates for high common-mode voltages, so headroom isn't sacrificed. The high input impedance allows bridging of the input signal with minimum loading. This way several amplifiers can be easily driven from the source.

Outputs

The individual output amplifiers are very low impedance so long lines and capacitive loads are easily driven with no loss of stability or high frequency response. Servo-balancing permits the outputs to be used single-ended at any time without a change in gain by simply grounding the unused pin. Individual output level controls are recessed for bump-proof operation, yet can be easily adjusted without tools. The front panel power LED also acts as a signal present and clip indicator for the input.

Aphex 120B Features:

  • 1 input, 4 output with output trim adjustments
  • Transformerless design for wide, flat frequency response
  • Works for audio or time code

Aphex 120B Specifications:

  • Audio:
    • Frequency Response: 5 Hz - 100 kHz (+0, -0.5 dB)
    • Dynamic Range: 94 dB
    • Hum and Noise: Better than -90 dBm at unity gain
    • THD: 0.002% @ + 4 dBm, 0.005% @ +20 dBm
    • IMD: 0.002% @ +10 dBm
    • Channel Isolation: 70 dB
    • Slew Rate: 13 V/usec
  • Input:
    • Connector: XLR 3-pin Female
    • Type: Transformerless, differential servo balanced
    • Impedance: 100 k ohms balanced
    • Maximum Level: +25 dBm
    • CMRR (typical): > 45 dB
  • Output:
    • Connector: XLR 3-pin Male
    • Impedance: 65 ohms
    • Maximum Level: + 25 dBm into 600 ohms balanced, +21 dBm unbalanced
    • Output Gain Range: +/- 15 dB
  • Other Specifications:
    • Power Requirements: 100, 120, 220, OR 240 VAC, 50-60Hz
    • Dimensions (H x W x D): 1.75 x 8.25 x 7.25" (44.5 x 209.5 x 184.2 mm)
    • Net Weight: 3.5 lbs (1.6 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM