Countryman I2 Cello Mount
Double Bass and Cello Mount for I2 Mics

OUR PART #  I2CELLOMOUNT


Countryman's I2 Bass and Cello Mount holds gently and securely, providing vibration damping and ideal microphone positioning on cellos and double basses.

Countryman I2 Cello Mount Specifications:

  • Frequency Response:
    • Omnidirectional: 20 Hz to 20 kHz
    • Directional: 50 Hz to 20 kHz
  • Overload Sound Level: 150 dB SPL at 1% THD
  • Output Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
  • Equivalent Acoustic Noise:  
    • Omnidirectional: 25 dBA
    • Directional: 29 dBA
  • Power Requirements: 6V to 50V Phantom at 4mA.Voltage below 24V will result in reduced overload SPL.
  • Sensitivity: 1.4 mV/Pascal
  • Dimensions: 9/32" x 7/16" x 5/32" (7mm x 10.5mm x 3.5mm) excluding cable strain relief.

Countryman I2 Cello Mount
Double Bass and Cello Mount for I2 Mics

OUR PART #  I2CELLOMOUNT

Product Information:

Countryman's I2 Bass and Cello Mount holds gently and securely, providing vibration damping and ideal microphone positioning on cellos and double basses.

Countryman I2 Cello Mount Specifications:

  • Frequency Response:
    • Omnidirectional: 20 Hz to 20 kHz
    • Directional: 50 Hz to 20 kHz
  • Overload Sound Level: 150 dB SPL at 1% THD
  • Output Impedance: 600 Ohms +/- 2% balanced, transformerless. Will drive load impedance without distortion at full rated SPL.
  • Equivalent Acoustic Noise:  
    • Omnidirectional: 25 dBA
    • Directional: 29 dBA
  • Power Requirements: 6V to 50V Phantom at 4mA.Voltage below 24V will result in reduced overload SPL.
  • Sensitivity: 1.4 mV/Pascal
  • Dimensions: 9/32" x 7/16" x 5/32" (7mm x 10.5mm x 3.5mm) excluding cable strain relief.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM