DPA Microphones MMP-C
d:dictate™ Compact Microphone Preamp

OUR PART #  MMP-C


DPA Microphones' d:dictate™ MMP-C is an ultra-compact microphone preamp with active drive for impedance balancing, and a slightly softer character than the other preamps in the DPA d:dictate™ Recording Microphones series. The MMP-C can be combined with any capsule in DPA's d:dictate™ series.

DPA Microphones MMP-C Specifications:

  • Output connector: XLR-3M
    • Pin 1: shield
    • Pin 2: signal + phase
    • Pin 3: - phase
  • Low-cut frequency, -3 dB: 15 Hz
  • Noise with shorted input, A-weighted: 0.6 µV
  • Output voltage, RMS: > 4 V
  • Output voltage, peak: > 5.6 V
  • Type of electronic circuit: Active
  • THD@1VRMS, 1kHz: < 0.2 %
  • Dynamic range: 136 dB
  • Output impedance: < 200 ohm
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Color: Matte Black
  • Weight: 40 g (1.4 oz)
  • Diameter: 19 mm (0.75 in)
  • Length: 41 mm (1.6 in)
  • Cable drive capability: 100 m (328 ft)
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %

DPA Microphones MMP-C
d:dictate™ Compact Microphone Preamp

OUR PART #  MMP-C

Product Information:

DPA Microphones' d:dictate™ MMP-C is an ultra-compact microphone preamp with active drive for impedance balancing, and a slightly softer character than the other preamps in the DPA d:dictate™ Recording Microphones series. The MMP-C can be combined with any capsule in DPA's d:dictate™ series.

DPA Microphones MMP-C Specifications:

  • Output connector: XLR-3M
    • Pin 1: shield
    • Pin 2: signal + phase
    • Pin 3: - phase
  • Low-cut frequency, -3 dB: 15 Hz
  • Noise with shorted input, A-weighted: 0.6 µV
  • Output voltage, RMS: > 4 V
  • Output voltage, peak: > 5.6 V
  • Type of electronic circuit: Active
  • THD@1VRMS, 1kHz: < 0.2 %
  • Dynamic range: 136 dB
  • Output impedance: < 200 ohm
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Color: Matte Black
  • Weight: 40 g (1.4 oz)
  • Diameter: 19 mm (0.75 in)
  • Length: 41 mm (1.6 in)
  • Cable drive capability: 100 m (328 ft)
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM