Attero Tech unD3IO
2x2 Channel Dante Audio Interface 2-Gang Wall Box

OUR PART #  UND3IO


The Attero Tech unD3IO Dante audio interface multi-IO wall box features a balanced mic/line XLR input, a balanced XLR line output, two RCA line level inputs, and a 3.5mm TRS line level input. A 3.5mm TRS line level output is also included. The unD3IO is designed to fit into most dual-gang US junction boxes and is PoE-enabled, so all connectivity (power and data) is provided by a single Cat5 cable. The unD3IO's size and IO density make it easy to put Dante connectivity wherever it's needed - near the audio source or sink - thereby eliminating costly and interferenceprone analog wiring.

Attero Tech unD3IO Specifications:

  • Analog inputs (XLR):
    • Type: Balanced and RF filtered
    • Phantom Power: +48V, software selectable (XLR input only)
    • Impedence: >1.8K ohms at any gain setting
    • EIN (Mic mode): -115dBu (+40dB gain)
    • Maximum Input Levels:
      • +8dBu @ 0dB gain
      • -16dBu @ +25dB gain
      • -31dBu @ +40dB gain
  • Analog inputs (RCA / Stereojack): Balanced and RF filtered, line level, summed to mono
  • Analog Outputs:
    • Type: Unbalanced line level with automatic muting on loss of Dante signal
    • Maximum Output Level: +12dBu
    • Output Noise: <-90dBu @ 0dB gain
  • Frequency Response: +/- 1dB, 20 Hz - 20 kHz
  • System THD: <.01% at any gain
  • PoE Class: Class 0 802.3af PoE PD compliant
  • Power Consumption: Less than 3W
  • Dimensions: 1.06" H x 6.45" W x 3.45" D
  • Certifications:
    • FCC CFR 47 Parts 15B
    • ICES-003
    • CE (EN55022)
  • Operating Temperature: 0° C - 40° C

Attero Tech unD3IO
2x2 Channel Dante Audio Interface 2-Gang Wall Box

OUR PART #  UND3IO

Product Information:

The Attero Tech unD3IO Dante audio interface multi-IO wall box features a balanced mic/line XLR input, a balanced XLR line output, two RCA line level inputs, and a 3.5mm TRS line level input. A 3.5mm TRS line level output is also included. The unD3IO is designed to fit into most dual-gang US junction boxes and is PoE-enabled, so all connectivity (power and data) is provided by a single Cat5 cable. The unD3IO's size and IO density make it easy to put Dante connectivity wherever it's needed - near the audio source or sink - thereby eliminating costly and interferenceprone analog wiring.

Attero Tech unD3IO Specifications:

  • Analog inputs (XLR):
    • Type: Balanced and RF filtered
    • Phantom Power: +48V, software selectable (XLR input only)
    • Impedence: >1.8K ohms at any gain setting
    • EIN (Mic mode): -115dBu (+40dB gain)
    • Maximum Input Levels:
      • +8dBu @ 0dB gain
      • -16dBu @ +25dB gain
      • -31dBu @ +40dB gain
  • Analog inputs (RCA / Stereojack): Balanced and RF filtered, line level, summed to mono
  • Analog Outputs:
    • Type: Unbalanced line level with automatic muting on loss of Dante signal
    • Maximum Output Level: +12dBu
    • Output Noise: <-90dBu @ 0dB gain
  • Frequency Response: +/- 1dB, 20 Hz - 20 kHz
  • System THD: <.01% at any gain
  • PoE Class: Class 0 802.3af PoE PD compliant
  • Power Consumption: Less than 3W
  • Dimensions: 1.06" H x 6.45" W x 3.45" D
  • Certifications:
    • FCC CFR 47 Parts 15B
    • ICES-003
    • CE (EN55022)
  • Operating Temperature: 0° C - 40° C
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM