Laney IRT30-112
30W 3-Channel 1x12" Tube Combo Guitar Amplifier

OUR PART #  IRT-30-112

Log In for price!

Don't have an account? Apply today!

Forged deep within the Black Country - the metal beating industrial heartland of the UK - where the sound of metal guitar was born, comes the IRONHEART.

With molten metal flowing through its circuits, IRONHEART continues the legacy passed on by previous Laney amps such as KLIPP and AOR, and hits you hard between the eyes like a power hammer from hell.

When cranked, the IRT30-112 possesses massive amounts of gain, but is equally at home providing smooth rock and clean tones. Like its 80's metal predecessor the AOR, each channel features 3-band EQ push/pull pots for extreme tone shaping and flexibility. Along with a Watts control, which allows the output of an IRT30-112 to be screwed right down to less than 1 watt output power, it also features a
foot switchable Pre-Boost function which works just like kicking in a gain pedal in front of your amp. On the rear panel can be found sockets for the FX Loop, Loudspeakers, Aux In & Foot switch, along with a switchable DI which features cabinet emulation in the AMP mode.

The IRT30-112 combo features two independent channel controls, with a switchable clean mode, for extra versatility. It is loaded with a 12" custom designed HH Acoustics speaker and the base of the cabinet is fitted with a special Tilting Mechanism, allowing the cabinet to be used in the upright or tilted back positions.

Combine your IRT30-112 with an IRT112, IRT212 or IRT412 speaker cabinet for the ultimate tonal experience.

Laney IRT-30-112 Includes:

  • IRT30-112 Combo Amplifier
  • FS4-IRT Footswitch
  • 5 pin Footswitch Cable
  • Mains Cable
  • User Manual

Laney IRT-30-112 Features:

  • Pre-Boost Input Control
  • Switchable Channels, with switchable clean mode
  • Laney-designed digital reverb
  • Tone Control
  • Dynamics Control
  • "Watts" Output Level Control
  • DI - Switched AMP/INPUT
  • 3.5mm Stereo CD/MP3 Line input
  • Insert-type FX Loop (0dBu, -10dBu, Bypass)

Laney IRT-30-112 Specifications:

  • Supply Voltage:
    • Factory: 100V, 120V, 220V, 230V, 240V 50/60Hz
    • Mains Fuse:
      • 100V>-120V T1.6A L
      • 220V>-240V T630mA L
  • HT Fuse: T315mA L
  • Power Consumption: 100W
  • Output Power Rating: 30W
  • Equalisation Per channel: Passive Bass, Middle Treble with switchable Deep, Mid Shift & Treble Shift Master section: Dynamics & Tone
  • Footswitch: Laney FS4-IRT(included ): Channel, Clean, Reverb, Boost
  • Loudspeaker Outputs: 4-8 Ohms (switchable)
  • Input Impedance: 1M Ohm/47pF
  • Size (WxHxD): 473 x 578 x 288 mm
  • Unit Weight: 20.5Kg
  • Packed Weight: 23Kg

Laney IRT30-112
30W 3-Channel 1x12" Tube Combo Guitar Amplifier

OUR PART #  IRT-30-112

Product Information:

Forged deep within the Black Country - the metal beating industrial heartland of the UK - where the sound of metal guitar was born, comes the IRONHEART.

With molten metal flowing through its circuits, IRONHEART continues the legacy passed on by previous Laney amps such as KLIPP and AOR, and hits you hard between the eyes like a power hammer from hell.

When cranked, the IRT30-112 possesses massive amounts of gain, but is equally at home providing smooth rock and clean tones. Like its 80's metal predecessor the AOR, each channel features 3-band EQ push/pull pots for extreme tone shaping and flexibility. Along with a Watts control, which allows the output of an IRT30-112 to be screwed right down to less than 1 watt output power, it also features a
foot switchable Pre-Boost function which works just like kicking in a gain pedal in front of your amp. On the rear panel can be found sockets for the FX Loop, Loudspeakers, Aux In & Foot switch, along with a switchable DI which features cabinet emulation in the AMP mode.

The IRT30-112 combo features two independent channel controls, with a switchable clean mode, for extra versatility. It is loaded with a 12" custom designed HH Acoustics speaker and the base of the cabinet is fitted with a special Tilting Mechanism, allowing the cabinet to be used in the upright or tilted back positions.

Combine your IRT30-112 with an IRT112, IRT212 or IRT412 speaker cabinet for the ultimate tonal experience.

Laney IRT-30-112 Includes:

  • IRT30-112 Combo Amplifier
  • FS4-IRT Footswitch
  • 5 pin Footswitch Cable
  • Mains Cable
  • User Manual

Laney IRT-30-112 Features:

  • Pre-Boost Input Control
  • Switchable Channels, with switchable clean mode
  • Laney-designed digital reverb
  • Tone Control
  • Dynamics Control
  • "Watts" Output Level Control
  • DI - Switched AMP/INPUT
  • 3.5mm Stereo CD/MP3 Line input
  • Insert-type FX Loop (0dBu, -10dBu, Bypass)

Laney IRT-30-112 Specifications:

  • Supply Voltage:
    • Factory: 100V, 120V, 220V, 230V, 240V 50/60Hz
    • Mains Fuse:
      • 100V>-120V T1.6A L
      • 220V>-240V T630mA L
  • HT Fuse: T315mA L
  • Power Consumption: 100W
  • Output Power Rating: 30W
  • Equalisation Per channel: Passive Bass, Middle Treble with switchable Deep, Mid Shift & Treble Shift Master section: Dynamics & Tone
  • Footswitch: Laney FS4-IRT(included ): Channel, Clean, Reverb, Boost
  • Loudspeaker Outputs: 4-8 Ohms (switchable)
  • Input Impedance: 1M Ohm/47pF
  • Size (WxHxD): 473 x 578 x 288 mm
  • Unit Weight: 20.5Kg
  • Packed Weight: 23Kg
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM