Community WX-1526
15" Two-Way Loudspeaker in Black

OUR PART #  WX-1526


WET X features marine-grade, plywood lined, multi-layer fiberglass enclosures and innovative drivers providing premium sound quality for both outdoor and indoor venues. WET X full-range models offer unmatched flexibility, each with six rotatable horn pattern choices, and production grade high output performance. Featuring a large diaphragm 1.4-inch exit high frequency compression driver, WET X loudspeakers can produce the same output levels as the largest WET II models but in enclosures nearly half the size. The low frequency cone and internal circuitry have Community's proprietary Envirotech coating for improved  weather-resistance. All WET X loudspeakers are available in black or white finishes, and dual-layer powder-coated stainless steel mounting brackets are included with all models.

WET loudspeakers are protected by a limited five-year product warranty plus a fifteen-year enclosure warranty.

Community WX-1526 Features:

  • Greater flexibility, higher output, smaller size than comparable WET II loudspeakers
  • Attractive architectural enclosure
  • Included color-matched 304 stainless steel mounting yoke
  • Fiberglass sealed 18mm marine-grade plywood interior, deep gloss fiberglass exterior
  • Solid bass, uncolored premium quality music reproduction for stadiums, theme parks, cruise ships, beach clubs and restaurants

Community WX-1526 Specifications:

  • Loudspeaker Type 2-way, full-range
  • Driver Complement LF: 1 x 15" cone, HF: 1 x 1.4" driver
  • Coverage Pattern (H x V) 120° x 60°
  • Operating Range (-10 dB) 40 Hz - 22 kHz
  • Frequency Response: (-3 dB) 50 Hz - 18 kHz
  • Input Ratings 600W RMS,1200W Program, 69 volts RMS, 138 volts momentary peak
  • Sensitivity 1W/1m (Frequency range):
  • 99dB (63 Hz–16 kHz)
  • 98dB (250 Hz–4 kHz)
  • Maximum SPL Continuous / Peak: 127dB / 133dB peak
  • Nominal Minimal Impedance:
  • 8 Ohms,
  • 6.3 Ohms @ 9kHz
  • Crossover Frequency 1.5 kHz
  • Recommended High Pass Filter: 50Hz 24dB/oct
  • Horn Rotatable Yes
  • Input Connection 12' (4m) SJOW #16 gauge cable (stripped ends)
  • Rigging Provisions Two 1/2"-13 points; mounting bracket included; Integral 1/2"-13 Safety Cable Mounting Point
  • Construction Modified trapezoidal fiberglass outer shell and face lined and reinforced with 18 mm marine grade plywood
  • Finish Black or White gel coat fiberglass
  • Dimensions: H x W x D 19.5" (495 mm) H x 33.63" (854 mm) W x 20.5" (520 mm)
  • Net Weight with bracket 133 lbs (60.3 kg

Community WX-1526
15" Two-Way Loudspeaker in Black

OUR PART #  WX-1526

Product Information:

WET X features marine-grade, plywood lined, multi-layer fiberglass enclosures and innovative drivers providing premium sound quality for both outdoor and indoor venues. WET X full-range models offer unmatched flexibility, each with six rotatable horn pattern choices, and production grade high output performance. Featuring a large diaphragm 1.4-inch exit high frequency compression driver, WET X loudspeakers can produce the same output levels as the largest WET II models but in enclosures nearly half the size. The low frequency cone and internal circuitry have Community's proprietary Envirotech coating for improved  weather-resistance. All WET X loudspeakers are available in black or white finishes, and dual-layer powder-coated stainless steel mounting brackets are included with all models.

WET loudspeakers are protected by a limited five-year product warranty plus a fifteen-year enclosure warranty.

Community WX-1526 Features:

  • Greater flexibility, higher output, smaller size than comparable WET II loudspeakers
  • Attractive architectural enclosure
  • Included color-matched 304 stainless steel mounting yoke
  • Fiberglass sealed 18mm marine-grade plywood interior, deep gloss fiberglass exterior
  • Solid bass, uncolored premium quality music reproduction for stadiums, theme parks, cruise ships, beach clubs and restaurants

Community WX-1526 Specifications:

  • Loudspeaker Type 2-way, full-range
  • Driver Complement LF: 1 x 15" cone, HF: 1 x 1.4" driver
  • Coverage Pattern (H x V) 120° x 60°
  • Operating Range (-10 dB) 40 Hz - 22 kHz
  • Frequency Response: (-3 dB) 50 Hz - 18 kHz
  • Input Ratings 600W RMS,1200W Program, 69 volts RMS, 138 volts momentary peak
  • Sensitivity 1W/1m (Frequency range):
  • 99dB (63 Hz–16 kHz)
  • 98dB (250 Hz–4 kHz)
  • Maximum SPL Continuous / Peak: 127dB / 133dB peak
  • Nominal Minimal Impedance:
  • 8 Ohms,
  • 6.3 Ohms @ 9kHz
  • Crossover Frequency 1.5 kHz
  • Recommended High Pass Filter: 50Hz 24dB/oct
  • Horn Rotatable Yes
  • Input Connection 12' (4m) SJOW #16 gauge cable (stripped ends)
  • Rigging Provisions Two 1/2"-13 points; mounting bracket included; Integral 1/2"-13 Safety Cable Mounting Point
  • Construction Modified trapezoidal fiberglass outer shell and face lined and reinforced with 18 mm marine grade plywood
  • Finish Black or White gel coat fiberglass
  • Dimensions: H x W x D 19.5" (495 mm) H x 33.63" (854 mm) W x 20.5" (520 mm)
  • Net Weight with bracket 133 lbs (60.3 kg
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM