Rane HAL3S
1RU MultiProcessor

OUR PART #  HAL3S

Log In for price!

Don't have an account? Apply today!

A HAL3s Multiprocessor supports 6 in x 10 out audio, with 2 in x 6 out on balanced analog connections, and another 4 in x 4 out digitally through RADs. The two analog Inputs are Line / Line-Plus / Mic / Mic+48V capable. In addition to supporting balanced line and microphone inputs, this configuration allows a stereo pair connection to an input, converting to a single L+R mono signal.

Two DR ports provides support for preset recall, level control and select functions using a DR1, DR2 or DR3. If more logic ins and outs are needed for pots, switches or external indicators, a DR4 or DR5 may be added. DRs can be operated from a RAD port, so up to four DRs can plug into a HAL3s when RADs aren't needed.

Rane HAL3S Features:

  • DSP contains 2400 MIPS of processing power
  • Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
  • 2 analog Mic / Line-Plus Inputs on Euroblock connectors (green area)
    • “Mic / Line-Plus” Inputs accept a balanced line, or mono left & right unbalanced lines, configured in Halogen software.
  • 6 analog balanced line outputs on Euroblock connectors (orange area)
  • Front panel signal and overload indicators for all inputs and outputs
  • Two RAD Ports, each Port 2 in x 2 out plus control channel (blue areas)
    • RJ-45 shielded CAT 5e connections up to 150 meters (500 feet)
  • Four Digital Remote Ports (brown and blue areas) [DR can connect to RAD port]
    • RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
  • Four Logic Inputs on Mini-Euroblock 6-pin connectors (gray area)
    • Internal passive pull-up

Rane HAL3S Specifications:

  • Unit Size: 1U, 1.75"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm)
  • Unit Weight: 5 lb (2.2 kg)
  • Shipping Weight: 9 lb (3.8 kg)

Note: Your existing HAL3 software configuration files are not compatible with the new HAL3s. This means system designers should either create brand new HAL3s files to use with the new model, or copy and paste all the HAL3 DSP blocks and wires into a new HAL3s file. Then recreate links, presets or paging management settings. You’ll find HAL3s support in the latest version of Halogen software.

Rane HAL3S
1RU MultiProcessor

OUR PART #  HAL3S

Product Information:

A HAL3s Multiprocessor supports 6 in x 10 out audio, with 2 in x 6 out on balanced analog connections, and another 4 in x 4 out digitally through RADs. The two analog Inputs are Line / Line-Plus / Mic / Mic+48V capable. In addition to supporting balanced line and microphone inputs, this configuration allows a stereo pair connection to an input, converting to a single L+R mono signal.

Two DR ports provides support for preset recall, level control and select functions using a DR1, DR2 or DR3. If more logic ins and outs are needed for pots, switches or external indicators, a DR4 or DR5 may be added. DRs can be operated from a RAD port, so up to four DRs can plug into a HAL3s when RADs aren't needed.

Rane HAL3S Features:

  • DSP contains 2400 MIPS of processing power
  • Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
  • 2 analog Mic / Line-Plus Inputs on Euroblock connectors (green area)
    • “Mic / Line-Plus” Inputs accept a balanced line, or mono left & right unbalanced lines, configured in Halogen software.
  • 6 analog balanced line outputs on Euroblock connectors (orange area)
  • Front panel signal and overload indicators for all inputs and outputs
  • Two RAD Ports, each Port 2 in x 2 out plus control channel (blue areas)
    • RJ-45 shielded CAT 5e connections up to 150 meters (500 feet)
  • Four Digital Remote Ports (brown and blue areas) [DR can connect to RAD port]
    • RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
  • Four Logic Inputs on Mini-Euroblock 6-pin connectors (gray area)
    • Internal passive pull-up

Rane HAL3S Specifications:

  • Unit Size: 1U, 1.75"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm)
  • Unit Weight: 5 lb (2.2 kg)
  • Shipping Weight: 9 lb (3.8 kg)

Note: Your existing HAL3 software configuration files are not compatible with the new HAL3s. This means system designers should either create brand new HAL3s files to use with the new model, or copy and paste all the HAL3 DSP blocks and wires into a new HAL3s file. Then recreate links, presets or paging management settings. You’ll find HAL3s support in the latest version of Halogen software.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.