DPA Microphones FIOF34-2
d:fine Dual-Ear Omnidirectional Headset Microphone for Sennheiser Wireless with Long Boom in Beige

OUR PART #  FIOF34-2


The FIOF34-2 is a beige dual-ear microphone with a 4.3" long boom and is wired with a 3.5mm locking connector for Sennheiser wireless transmitters.

The DPA d:fine series has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible.

Just by rotating the boom and the earhook, the microphone can be moved from left to right ear, or into the optimum position.

Staying true to the DPA legacy, d:fine offers accurate, natural voice intelligibility and very high SPL capabilities – users can both speak and sing into the mic with no hint of distortion. Intensive protection against pop and wind noise is integrated in the microphone design and windscreens are included.

The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications.

DPA FIOF34-2 Features:

  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact
  • Adapts to all pro wireless systems

DPA FIOF34-2 Specifications:

  • Directional characteristics:  Omnidirectional or directional
  • Principle of operation:  Pressure or pressure gradient
  • Cartridge type:  Pre-polarized condenser
  • Frequency range:  20 Hz - 20 kHz
  • Frequency range, ± 2 dB:  Omni: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz.
  • Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa;-44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:  Omni: Typ.26 dB(A) re. 20 µPa (max. 28 dB(A)).
  • Equivalent noise level, ITU-R BS.468-4:  Omni:  Typ. 38 dB (max. 40 dB).
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL):  Omni: Typ. 68 dB(A).
  • Total Harmonic Distortion (THD):  <1 % up to123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
  • Dynamic range:  Omni: Typ. 97 dB.
  • Max. SPL, peak before clipping:  144 dB
  • Output impedance:  From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm.
  • Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
  • Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
  • Common Mode Rejection Ratio (CMRR):  > 60 dBfrom 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4V with DAD6001-BC XLR adapter.
  • Current consumption:  Typ. 1.5 mA (microphone).3.5 mA with DAD6001-BC XLR adapter.
  • Connector:  MicroDot
  • Color:  Beige
  • Weight:  Microphone boom: 0.8 g (0.03 oz);earhook: 1.1 g (0.04 oz); cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
  • Microphone head size (h x w x d):  9.5 x 5.3 x2.9 mm (0.37 x 0.21 x 0.11 in)
  • Capsule diameter:  5.4 mm (0.2 in)
  • Mic boom lengths:  Omni: 40 mm (1.6 in), 90 mm(3.5 in), (110 mm (4.3 in).
  • Cable length:  1.3 m (4.3 ft)
  • Cable color:  Beige
  • Cable diameter:  1.6 mm (0.06 in)
  • Polarity:  +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Electro Magnetic Compatibility (EMC):  Fully compatible
  • Temperature range:  -40 °C to 45 °C (-40 °F to113 °F)
  • Relative Humidity (RH):  Up to 90%
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6034 MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6034 is a MicroDot to Mini-Jack (with thread) adapter for DPA's series of Miniature Microphones and for use with Sennhesier's Evolution G2 / G3 / X2 digital wireless systems.
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

DPA Microphones FIOF34-2
d:fine Dual-Ear Omnidirectional Headset Microphone for Sennheiser Wireless with Long Boom in Beige

OUR PART #  FIOF34-2

Product Information:

The FIOF34-2 is a beige dual-ear microphone with a 4.3" long boom and is wired with a 3.5mm locking connector for Sennheiser wireless transmitters.

The DPA d:fine series has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible.

Just by rotating the boom and the earhook, the microphone can be moved from left to right ear, or into the optimum position.

Staying true to the DPA legacy, d:fine offers accurate, natural voice intelligibility and very high SPL capabilities – users can both speak and sing into the mic with no hint of distortion. Intensive protection against pop and wind noise is integrated in the microphone design and windscreens are included.

The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications.

DPA FIOF34-2 Features:

  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact
  • Adapts to all pro wireless systems

DPA FIOF34-2 Specifications:

  • Directional characteristics:  Omnidirectional or directional
  • Principle of operation:  Pressure or pressure gradient
  • Cartridge type:  Pre-polarized condenser
  • Frequency range:  20 Hz - 20 kHz
  • Frequency range, ± 2 dB:  Omni: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz.
  • Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa;-44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:  Omni: Typ.26 dB(A) re. 20 µPa (max. 28 dB(A)).
  • Equivalent noise level, ITU-R BS.468-4:  Omni:  Typ. 38 dB (max. 40 dB).
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dBSPL):  Omni: Typ. 68 dB(A).
  • Total Harmonic Distortion (THD):  <1 % up to123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
  • Dynamic range:  Omni: Typ. 97 dB.
  • Max. SPL, peak before clipping:  144 dB
  • Output impedance:  From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm.
  • Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
  • Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
  • Common Mode Rejection Ratio (CMRR):  > 60 dBfrom 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4V with DAD6001-BC XLR adapter.
  • Current consumption:  Typ. 1.5 mA (microphone).3.5 mA with DAD6001-BC XLR adapter.
  • Connector:  MicroDot
  • Color:  Beige
  • Weight:  Microphone boom: 0.8 g (0.03 oz);earhook: 1.1 g (0.04 oz); cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
  • Microphone head size (h x w x d):  9.5 x 5.3 x2.9 mm (0.37 x 0.21 x 0.11 in)
  • Capsule diameter:  5.4 mm (0.2 in)
  • Mic boom lengths:  Omni: 40 mm (1.6 in), 90 mm(3.5 in), (110 mm (4.3 in).
  • Cable length:  1.3 m (4.3 ft)
  • Cable color:  Beige
  • Cable diameter:  1.6 mm (0.06 in)
  • Polarity:  +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Electro Magnetic Compatibility (EMC):  Fully compatible
  • Temperature range:  -40 °C to 45 °C (-40 °F to113 °F)
  • Relative Humidity (RH):  Up to 90%
MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
DPA Microphones DAD6001-BC MicroDot to 3-Pin XLR (P48) Adapter with Belt Clip
The DPA Microphones DAD6001-BC is a MicroDot to 3-Pin XLR adapter for powering their Miniature Microphones via standard P48. The DAD6001 is active signal balanced which improves suppression of induced electromagnetic noise. ...
Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
DPA Microphones DAD6010 Microphones MicroDot to TA4F Switchcraft Adapter for Select Shure Wireless Systems
The DPA Microphones DAD6010 is a MicroDot to TA4F Switchcraft adapter for use with DPA's series of Miniature Microphones. Compatible with: Shure: U1, UR1,UT1, SC1, SLX1, ULX1TOA: WM4300,PGX1Line 6: XD-V70L
MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6034 MicroDot to Locking Mini-Jack Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6034 is a MicroDot to Mini-Jack (with thread) adapter for DPA's series of Miniature Microphones and for use with Sennhesier's Evolution G2 / G3 / X2 digital wireless systems.
MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
DPA Microphones DAD6003 MicroDot to 3-pin LEMO Adapter for Sennheiser Wireless Systems
The DPA Microphones DAD6003 is a MicroDot to 3-Pim Lemo adapter that is designed for use with DPA's series of Miniature Microphones.Compatible with: Sennheiser: SK 50/SK 250/SK 2000/SK 3063/SK 5012 Trantec: SD7000 Digital Wireless ...
Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
DPA Microphones DAD3056 Adapter for Lectrosonic LM, SM and UM Series (for low DC microphones)
Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067.MicroDot for TA-5F Switchcraft. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
DPA Microphones DAD6008 MicroDot to 4-pin Hirose Adapter for Sony WRT820/WRT860/WRT8
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Hirose.

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
DPA Microphones DAD6012 MicroDot to TA-5F Switchcraft Adapter for Lectrosonics M185.
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
DPA Microphones DAD6019 MicroDot to Mini-Jack (with thread) Adapter for Sony Freedom WRT 805
Adapter for use with DPA's series of Miniature Microphones.MicroDot to Mini-Jack (with thread).

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
DPA Microphones DAD6011 MicroDot to 4-pin Lemo Series S Adapter for Vega T-66/T-677 & Shure U1L
Adapter for use with DPA's series of Miniature MicrophonesMicroDot to 4-pin Lemo Series S. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
DPA Microphones DAD6032 MicroDot to TA 4F Switchcraft Adapter for Beyerdyn, OPUS, Mipro
Adapter for use with DPA's series of Miniature Microphones. For Beyerdyn, OPUS 300/500/600/800/900, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808.MicroDot to TA 4F Switchcraft.

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA-3F Switchcraft Adapter
DPA Microphones DAD6017 MicroDot to TA-3F Switchcraft Adapter
Adapter for use with DPA's series of Miniature Microphones.  Compatible with AKG DPT70/700, PT60/80/81/45/400/450/470/4000/4500 Samson UT1L, VT2L.  MicroDot to TA-3F Switchcraft. 

Usually ships in 7-14 business days.
Need it sooner? Call us!
MicroDot to TA 5F Switchcraft Adapter for Normal SPL
DPA Microphones DAD6021 MicroDot to TA 5F Switchcraft Adapter for Normal SPL
The DPA Microphones DAD6021 is a MicroDot to TA 5F Switchcraft adapter that is designed for use with DPA's series of Miniature Microphones and the Audio-Technica ATW-T101 (U100) and Lectrosonics UHF systems (low level). For ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM