AMX FG1010-320-BL
DXLink Multi-Format Wallplate Transmitter in Black

OUR PART #  FG1010-320-BL

Log In for price!

Don't have an account? Apply today!

AMX's DXLink Multi-Format Wallplate Transmitter sends analog or digital video including HDMI/HDCP, along with embedded audio or supplemental analog audio up to 100 meters to an Enova DGX Digital Media Switcher, compatible Enova DVX All-In-One Presentation Switcher, or directly to a DXLink Receiver. It receives Power over DXLink* from the Enova DGX, Enova DVX (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Dual Power over DXLink Controller over the twisted pair cable and features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.

AMX FG1010-320-BL common applications: Mount the DXLink Multi-Format Wallplate Transmitter in the wall or lectern to connect guest equipment and send audio and video signals across the room, on the other side of the house or in a classroom down the hall. Since it is powered remotely, the wallplate can be installed virtually anywhere.

AMX FG1010-320-BL Features:

  • Only One Cable Send audio and video, while passing Ethernet signals and power over one twisted pair cable
  • Multi-Format Analog Port and HDMI Port Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, Display Port++ and DVI signals
  • Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the white paper titled Cabling for Success with DXLink for more details
  • Power over DXLink* Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2(FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
  • DXLink Direct Connection – When receiving Power over DXLink* from the PS-POE-AT-TC or PDXL-2, DXLink Wallplates can be connected directly to a DXLink Receiver for a point-to-point solution
  • Power Remotely - Power over DXLink* is carried over twisted pair to simplify installation when used with the Enova DGX, Enova DVX,PS-POE-AT-TC or PDXL-2
  • 3D Support - Pass through latest video formats including 3D and Deep Color
  • Surround Sound Support - Pass through high definition surround sound including Dolby Digital, DTS and up to 8-channel L-PCM at 32kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
  • HDCP Compliant

* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.

AMX FG-1010320-BL Specifications:

GENERAL

  • Dimensions (HWD):  4-11/16" x 6" x 1-5/16"(11.90 cm x 15.20 cm x 3.33 cm)
  • Installation:  Mounts onto standard 2 gang US, UK or EU back boxes
  • Weight: 1.4 lb (0.64 kg)
  • Shipping Weight: Approx. 2.2 lb (1.0 kg)
  • Compatible AMX Products:
    • Enova DGX 8/16/32/64 Digital Media Switchers
    • Enova DVX-3155HD, DVX-2156HD and DVX-2155HDAll-In-One Presentation Switcher
    • AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC orPDXL-2)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller
  • Airflow: Natural convection via air vent openings on front, back and top
  • MTBF: 381,000 hours
  • Approvals:        
    • CE EN 55022, EN 55024 and EN 60950-1
    • IEC 60950-1
    • FCC
    • UL 60950-1
    • cUL
    • RoHS/ WEEE compliant

DXLink

  • Transport Layer Throughput (Max): 10.2 Gbps
  • Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7

DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference

For more details and helpful cabling information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX representative

  • Twisted Pair Cable Length: Up to 328 ft (100 m)

ACTIVE POWER REQUIREMENTS
DXLink Power:

  • Power must be supplied by a DXLink Power sourcing device such as:
    • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
    • Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller

When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration

AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC orPDXL-2 as a power source the wallplates require firmware v1.2.40 or above

  • Power Connector: Included on DXLink Connection
  • Power Consumption (Max): Power over DXLink Supplied 7 W

POWER SUPPLY
External, Required:

  • Power must be supplied by a DXLink Power sourcing device such as:
    • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
    • Compatible Enova DVX All-In-One Presentation Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller

AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wall plates require firmware v1.2.40 or above

ENVIRONMENTAL

  • Temperature (Operating): 32° to 104° F (0° to 40° C)
  • Temperature (Storage): -22° to 158° F (-30° to 70° C)
  • Humidity (Operating): 5% to 85% RH (non-condensing)
  • Humidity (Storage): 0% to 90% RH (non-condensing)
  • Heat Dissipation (Max): Power over DXLink supplied: 24 BTU/HR

FRONT CONNECTORS

  • HDMI Input: HDMI Type A Female
  • Analog Video Input: HD-15 (Breakout cable required for non RGB formats)
  • Analog Stereo Input: 3.5mm Mini-Stereo Jack
  • Advanced Configuration Interface**: USB Mini-B Connector
  • USB (HID) Keyboard & Mouse**: USB Mini-B Connector

**This feature will be available upon release of a future firmware update

SIDE CONNECTORS

  • ID Pushbutton:
    • Toggle between DHCP and static IP addressing
    • Places system in NetLinx Device ID assignment mode
    • Reset the factory default settings
    • Restore the factory firmware image
  • Reset Pushbutton: Resets/reboots the CPU of the wallplate

BACK CONNECTORS

  • DXLink Output: RJ-45

CONTROL

  • Advanced Configuration Interface**: USB Mini-B Connector

**This feature will be available upon release of a future firmware update

INDICATORS

  • Power Indicator: Green indicates whether or not the module is powered on

HDMI

  • Compatible Formats: HDMI, HDCP, DVI
  • Input Signal Type:
    • HDMI
    • DVI-D (Single Link With Cable Adapter)
    • Display Port ++ (Input Only, With HDMI Cable Adapter)
  • Input Connector: HDMI Type A Female
  • Propagation Delay (Typ): 5 us
  • Input Voltage (Nominal): 1.0 Vpp Differential
  • Input Re-clocking (CDR): Yes
  • Input Equalization: Yes, Adaptive
  • Data Rate (Max): 4.95 Gbps / 6.75 Gbps
    • 6.75 Gbps supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Pixel Clock (Max): 165 MHz / 225 MHz
    • 225 MHz supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Progressive Resolution Support: 480p up to 1920x1200 @60 Hz including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual
  • Interlaced Resolution Support:
    480i, 576i, 1080i including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual. If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through
  • Deep Color Support: 24-bit, 30-bit, 36-bit
    • 30-bit, 36-bit supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Color Space Support: RGB 4:4:4, YCbCr 4:4:4 and 4:2:2(Input signal support for YCbCr 4:4:4 and 4:2:2,output color-space is converted to RGB 4:4:4)
  • 3D Format Support: Yes (HDMI Primary Formats)
    • Frame Packing 1080p up to 24Hz
    • Frame Packing 720p up to 50/60Hz
    • Frame Packing 1080i up to 50/60Hz
    • Top-Bottom 1080p up to 24Hz
    • Top-Bottom 720p up to 50/60Hz
    • Side-by-Side Half 1080p up to 50/60Hz
    • Side-by-Side Half 720p up to 50/60Hz
    • 3D supported when the DXLink HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channels
  • Audio Resolution: 16 bit to 24 bit
  • Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz,192kHz
  • Local Audio Support: Yes for audio insertion
  • HDCP Support: Yes, supports AMX HDCP InstaGate ProTechnology when used with either an Enova DGX8/16/32 Digital Media Switcher orDVX All-In-One Presentation Switcher the key support is up to 16 sinks per output, independent of source device when used as a single point to point solution the key support is defined by the source device
  • CEC Support: None
  • DDC/EDID Support: The HDMI EDID in point to point mode is passed up from the sink device. When used with Enova DGX 8/16/32/64 Digital Media Switcher orEnova DVX-3155HD, DVX-3156HD or DVX-2155HD the HDMIEDID is passed from the Enova Switcher input to the TX and is user reprogrammable. The analog video input connection provides a fixed EDID set

ANALOG VIDEO

  • Compatible Formats: RGBHV, RGBs, RGsB; YPbPr (HDTV);Y/c (S-Video), C (Composite)
  • Progressive Resolution Support: 480p up to 1920x1200@ 60 Hz (reference the DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
  • Interlaced Resolution Support: 480i, 576i, 1080i (reference DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
    If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered
  • Auto-Adjust Input**: Supported
  • RGB Input Signal Level Range: 1 Vpp nominal
  • RGB Input Impedance: 75 ohms
  • HV Sync Input Signal Level Range: 2 to 5 Vpp
  • HV Sync Input Impedance: 2.5 pF Typ, 10 pF Max
  • Digital Processing: 24 bit, 165 MHz
  • Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700mVpp for Pb Pr
  • Y/Pb/Pr Input Impedance: 75 ohms
  • Y/c (S-Video) Input Signal Level Range: 1.0 Vpp forY, 1.0 Vpp for c
  • Y/c (S-Video) Input Impedance: 75 ohms
  • C (Composite) Input Signal Level Range: 1.0 Vpp
  • C (Composite) Input Impedance: 75 ohms
  • Input Connector: HD-15 (Breakout cable required for non RGBHV formats)

AUDIO (ANALOG & DIGITAL S/PDIF)

  • Input Signal Types: Stereo Analog, S/PDIF
    • Video signal must be present to pass Audio
  • Analog Input Level (Max): +2 dBu, unbalanced
  • Analog Input Impedance: 10k ohms
  • Analog to Digital Conversion: 48 kHz Sample Rate,24-bit
  • S/PDIF Audio Format Support: Dolby Digital, DTS, 2 CHL-PCM; Dolby Digital and DTS support up to 48kHz, 5.1 channels
  • S/PDIF Resolution: 16 to 24 bit
  • S/PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
  • S/PDIF Input Signal Level Range: 200 mVpp to 600mVpp terminated
  • S/PDIF Input Impedance: 75 ohms
  • Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
  • Input Connectors: 3.5mm Mini-Stereo Jack (Analog Stereo), RCA Jack (S/PDIF)

** This feature will be available upon release of a future firmware update

Note: Specifications are subject to change.

AMX FG1010-320-BL
DXLink Multi-Format Wallplate Transmitter in Black

OUR PART #  FG1010-320-BL

Product Information:

AMX's DXLink Multi-Format Wallplate Transmitter sends analog or digital video including HDMI/HDCP, along with embedded audio or supplemental analog audio up to 100 meters to an Enova DGX Digital Media Switcher, compatible Enova DVX All-In-One Presentation Switcher, or directly to a DXLink Receiver. It receives Power over DXLink* from the Enova DGX, Enova DVX (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Dual Power over DXLink Controller over the twisted pair cable and features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.

AMX FG1010-320-BL common applications: Mount the DXLink Multi-Format Wallplate Transmitter in the wall or lectern to connect guest equipment and send audio and video signals across the room, on the other side of the house or in a classroom down the hall. Since it is powered remotely, the wallplate can be installed virtually anywhere.

AMX FG1010-320-BL Features:

  • Only One Cable Send audio and video, while passing Ethernet signals and power over one twisted pair cable
  • Multi-Format Analog Port and HDMI Port Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, Display Port++ and DVI signals
  • Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the white paper titled Cabling for Success with DXLink for more details
  • Power over DXLink* Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2(FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
  • DXLink Direct Connection – When receiving Power over DXLink* from the PS-POE-AT-TC or PDXL-2, DXLink Wallplates can be connected directly to a DXLink Receiver for a point-to-point solution
  • Power Remotely - Power over DXLink* is carried over twisted pair to simplify installation when used with the Enova DGX, Enova DVX,PS-POE-AT-TC or PDXL-2
  • 3D Support - Pass through latest video formats including 3D and Deep Color
  • Surround Sound Support - Pass through high definition surround sound including Dolby Digital, DTS and up to 8-channel L-PCM at 32kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
  • HDCP Compliant

* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.

AMX FG-1010320-BL Specifications:

GENERAL

  • Dimensions (HWD):  4-11/16" x 6" x 1-5/16"(11.90 cm x 15.20 cm x 3.33 cm)
  • Installation:  Mounts onto standard 2 gang US, UK or EU back boxes
  • Weight: 1.4 lb (0.64 kg)
  • Shipping Weight: Approx. 2.2 lb (1.0 kg)
  • Compatible AMX Products:
    • Enova DGX 8/16/32/64 Digital Media Switchers
    • Enova DVX-3155HD, DVX-2156HD and DVX-2155HDAll-In-One Presentation Switcher
    • AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC orPDXL-2)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller
  • Airflow: Natural convection via air vent openings on front, back and top
  • MTBF: 381,000 hours
  • Approvals:        
    • CE EN 55022, EN 55024 and EN 60950-1
    • IEC 60950-1
    • FCC
    • UL 60950-1
    • cUL
    • RoHS/ WEEE compliant

DXLink

  • Transport Layer Throughput (Max): 10.2 Gbps
  • Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7

DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference

For more details and helpful cabling information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX representative

  • Twisted Pair Cable Length: Up to 328 ft (100 m)

ACTIVE POWER REQUIREMENTS
DXLink Power:

  • Power must be supplied by a DXLink Power sourcing device such as:
    • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
    • Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller

When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration

AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC orPDXL-2 as a power source the wallplates require firmware v1.2.40 or above

  • Power Connector: Included on DXLink Connection
  • Power Consumption (Max): Power over DXLink Supplied 7 W

POWER SUPPLY
External, Required:

  • Power must be supplied by a DXLink Power sourcing device such as:
    • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
    • Compatible Enova DVX All-In-One Presentation Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller

AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wall plates require firmware v1.2.40 or above

ENVIRONMENTAL

  • Temperature (Operating): 32° to 104° F (0° to 40° C)
  • Temperature (Storage): -22° to 158° F (-30° to 70° C)
  • Humidity (Operating): 5% to 85% RH (non-condensing)
  • Humidity (Storage): 0% to 90% RH (non-condensing)
  • Heat Dissipation (Max): Power over DXLink supplied: 24 BTU/HR

FRONT CONNECTORS

  • HDMI Input: HDMI Type A Female
  • Analog Video Input: HD-15 (Breakout cable required for non RGB formats)
  • Analog Stereo Input: 3.5mm Mini-Stereo Jack
  • Advanced Configuration Interface**: USB Mini-B Connector
  • USB (HID) Keyboard & Mouse**: USB Mini-B Connector

**This feature will be available upon release of a future firmware update

SIDE CONNECTORS

  • ID Pushbutton:
    • Toggle between DHCP and static IP addressing
    • Places system in NetLinx Device ID assignment mode
    • Reset the factory default settings
    • Restore the factory firmware image
  • Reset Pushbutton: Resets/reboots the CPU of the wallplate

BACK CONNECTORS

  • DXLink Output: RJ-45

CONTROL

  • Advanced Configuration Interface**: USB Mini-B Connector

**This feature will be available upon release of a future firmware update

INDICATORS

  • Power Indicator: Green indicates whether or not the module is powered on

HDMI

  • Compatible Formats: HDMI, HDCP, DVI
  • Input Signal Type:
    • HDMI
    • DVI-D (Single Link With Cable Adapter)
    • Display Port ++ (Input Only, With HDMI Cable Adapter)
  • Input Connector: HDMI Type A Female
  • Propagation Delay (Typ): 5 us
  • Input Voltage (Nominal): 1.0 Vpp Differential
  • Input Re-clocking (CDR): Yes
  • Input Equalization: Yes, Adaptive
  • Data Rate (Max): 4.95 Gbps / 6.75 Gbps
    • 6.75 Gbps supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Pixel Clock (Max): 165 MHz / 225 MHz
    • 225 MHz supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Progressive Resolution Support: 480p up to 1920x1200 @60 Hz including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual
  • Interlaced Resolution Support:
    480i, 576i, 1080i including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual. If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through
  • Deep Color Support: 24-bit, 30-bit, 36-bit
    • 30-bit, 36-bit supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
  • Color Space Support: RGB 4:4:4, YCbCr 4:4:4 and 4:2:2(Input signal support for YCbCr 4:4:4 and 4:2:2,output color-space is converted to RGB 4:4:4)
  • 3D Format Support: Yes (HDMI Primary Formats)
    • Frame Packing 1080p up to 24Hz
    • Frame Packing 720p up to 50/60Hz
    • Frame Packing 1080i up to 50/60Hz
    • Top-Bottom 1080p up to 24Hz
    • Top-Bottom 720p up to 50/60Hz
    • Side-by-Side Half 1080p up to 50/60Hz
    • Side-by-Side Half 720p up to 50/60Hz
    • 3D supported when the DXLink HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channels
  • Audio Resolution: 16 bit to 24 bit
  • Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz,192kHz
  • Local Audio Support: Yes for audio insertion
  • HDCP Support: Yes, supports AMX HDCP InstaGate ProTechnology when used with either an Enova DGX8/16/32 Digital Media Switcher orDVX All-In-One Presentation Switcher the key support is up to 16 sinks per output, independent of source device when used as a single point to point solution the key support is defined by the source device
  • CEC Support: None
  • DDC/EDID Support: The HDMI EDID in point to point mode is passed up from the sink device. When used with Enova DGX 8/16/32/64 Digital Media Switcher orEnova DVX-3155HD, DVX-3156HD or DVX-2155HD the HDMIEDID is passed from the Enova Switcher input to the TX and is user reprogrammable. The analog video input connection provides a fixed EDID set

ANALOG VIDEO

  • Compatible Formats: RGBHV, RGBs, RGsB; YPbPr (HDTV);Y/c (S-Video), C (Composite)
  • Progressive Resolution Support: 480p up to 1920x1200@ 60 Hz (reference the DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
  • Interlaced Resolution Support: 480i, 576i, 1080i (reference DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
    If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered
  • Auto-Adjust Input**: Supported
  • RGB Input Signal Level Range: 1 Vpp nominal
  • RGB Input Impedance: 75 ohms
  • HV Sync Input Signal Level Range: 2 to 5 Vpp
  • HV Sync Input Impedance: 2.5 pF Typ, 10 pF Max
  • Digital Processing: 24 bit, 165 MHz
  • Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700mVpp for Pb Pr
  • Y/Pb/Pr Input Impedance: 75 ohms
  • Y/c (S-Video) Input Signal Level Range: 1.0 Vpp forY, 1.0 Vpp for c
  • Y/c (S-Video) Input Impedance: 75 ohms
  • C (Composite) Input Signal Level Range: 1.0 Vpp
  • C (Composite) Input Impedance: 75 ohms
  • Input Connector: HD-15 (Breakout cable required for non RGBHV formats)

AUDIO (ANALOG & DIGITAL S/PDIF)

  • Input Signal Types: Stereo Analog, S/PDIF
    • Video signal must be present to pass Audio
  • Analog Input Level (Max): +2 dBu, unbalanced
  • Analog Input Impedance: 10k ohms
  • Analog to Digital Conversion: 48 kHz Sample Rate,24-bit
  • S/PDIF Audio Format Support: Dolby Digital, DTS, 2 CHL-PCM; Dolby Digital and DTS support up to 48kHz, 5.1 channels
  • S/PDIF Resolution: 16 to 24 bit
  • S/PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
  • S/PDIF Input Signal Level Range: 200 mVpp to 600mVpp terminated
  • S/PDIF Input Impedance: 75 ohms
  • Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
  • Input Connectors: 3.5mm Mini-Stereo Jack (Analog Stereo), RCA Jack (S/PDIF)

** This feature will be available upon release of a future firmware update

Note: Specifications are subject to change.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM