Shure ULXD4-H50
Digital Wireless Receiver

OUR PART #  ULXD4-H50


The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D™ Digital Wireless Systems.

With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.

Shure ULXD4 Features:

  • Predictive switching diversity
  • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
  • Interference detection and alerts provided on both the receiver and Wireless Workbench® 6 (coming soon)
  • Front panel gain adjustment buttons provide up to 60 dB additional gain
  • AES 256-bit encryption-enabled for applications where secure transmission is needed
  • Ethernet networking provides streamlined setup across multiple receivers,Wireless Workbench® 6 integration (coming soon), and AMX/Crestron control
  • Support for frequency coordination with the Axient™ Spectrum Manager (coming soon)
  • Rugged metal chassis
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Remoteable ½ wave antennas
  • Furnished rack hardware

Shure ULXD4 Specifications:

RF INPUT

  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ohms
  • Bias Voltage: 12–13 V DC, 170 mA maximum, per antenna

AUDIO OUTPUT

  • Gain Adjustment Range: -18 to +42 dB in 1 dB steps(plus Mute setting)
  • Configuration:
    • 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
    • XLR: Balanced (1=ground, 2=audio +, 3=audio -) < /LI> < /UL>
  • Impedance:
    • 1/4" (6.35 mm): 100 Ohms (50 Ohms Unbalanced)
    • XLR: 100 Ohms
  • Full Scale Output:
    • 1/4" (6.35 mm): +12 dBV
    • XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
  • Mic / Line Switch: 30 dB pad
  • Phantom Power Protection:
    • 1/4" (6.35 mm): Yes
    • XLR: Yes

NETWORKING

  • Power Over Ethernet (PoE): No, protected
  • Network Interface: Single Port Ethernet 10 / 100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 328 ft (100 m)

ADDITIONAL SPECS

  • Audio Frequency Response: 20 Hz–20 kHz, flat
  • Dynamic Range: 120 dB, extended
  • Tuning Range: Up to 64 MHz
  • Dimensions: 7.75" H x 6.75" W x 1.65" D (197 mm x 171 mm x 42 mm)
  • Weight: 2.0 lbs (913 g), without antennas
  • Housing: Galvanized steel
Active Directional Antenna, 470-698 MHz
Shure UA874US Active Directional Antenna, 470-698 MHz
Experience improved wireless reception with the UA874. This UHF antenna uses a log periodic dipole array to produce a cardioid pattern toward the desired coverage area, achieving greater rejection of RF signals outside the area than ...
100' UHF remote extension cable, BNC to BNC, RG213
Shure UA8100 100' UHF remote extension cable, BNC to BNC, RG213
Remote Antenna Extension Cable BNC to BNC, RG213 type, 100 foot (30m).Compatible with ULXS4, ULXP4, UC4, U4S and U4D.
50 ft UHF Remote Antenna Extension Cable with BNC Connectors
Shure UA850 50 ft UHF Remote Antenna Extension Cable with BNC Connectors
The Shure UA850 50 ft remote antenna extension cable features BNC connectors and RG8X/U type cable. It is compatible with their ULXS4, ULXP4, UC4, U4S and U4D models.
6' UHF coaxial cable, BNC to BNC
Shure UA806 6' UHF coaxial cable, BNC to BNC
Remote Antenna Extension Cable BNC-BNC, RG58C/U type 6 foot (2m).
Rackmount Kit for Single ULX Receiver
Shure UA506 Rackmount Kit for Single ULX Receiver
The Shure UA506 is a rackmount kit for mounting a single ULX receiver in to a standard 19" rack.
1/2 Wave Omnidirectional Antenna
Shure UA8 1/2 Wave Omnidirectional Antenna
The Shure UA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters. Features 0°, 45°, and 90° positioning for increased stability.

Shure ULXD4-H50
Digital Wireless Receiver

OUR PART #  ULXD4-H50

Product Information:

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D™ Digital Wireless Systems.

With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.

Shure ULXD4 Features:

  • Predictive switching diversity
  • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
  • Interference detection and alerts provided on both the receiver and Wireless Workbench® 6 (coming soon)
  • Front panel gain adjustment buttons provide up to 60 dB additional gain
  • AES 256-bit encryption-enabled for applications where secure transmission is needed
  • Ethernet networking provides streamlined setup across multiple receivers,Wireless Workbench® 6 integration (coming soon), and AMX/Crestron control
  • Support for frequency coordination with the Axient™ Spectrum Manager (coming soon)
  • Rugged metal chassis
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Remoteable ½ wave antennas
  • Furnished rack hardware

Shure ULXD4 Specifications:

RF INPUT

  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ohms
  • Bias Voltage: 12–13 V DC, 170 mA maximum, per antenna

AUDIO OUTPUT

  • Gain Adjustment Range: -18 to +42 dB in 1 dB steps(plus Mute setting)
  • Configuration:
    • 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
    • XLR: Balanced (1=ground, 2=audio +, 3=audio -) < /LI> < /UL>
  • Impedance:
    • 1/4" (6.35 mm): 100 Ohms (50 Ohms Unbalanced)
    • XLR: 100 Ohms
  • Full Scale Output:
    • 1/4" (6.35 mm): +12 dBV
    • XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
  • Mic / Line Switch: 30 dB pad
  • Phantom Power Protection:
    • 1/4" (6.35 mm): Yes
    • XLR: Yes

NETWORKING

  • Power Over Ethernet (PoE): No, protected
  • Network Interface: Single Port Ethernet 10 / 100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 328 ft (100 m)

ADDITIONAL SPECS

  • Audio Frequency Response: 20 Hz–20 kHz, flat
  • Dynamic Range: 120 dB, extended
  • Tuning Range: Up to 64 MHz
  • Dimensions: 7.75" H x 6.75" W x 1.65" D (197 mm x 171 mm x 42 mm)
  • Weight: 2.0 lbs (913 g), without antennas
  • Housing: Galvanized steel
Active Directional Antenna, 470-698 MHz
Shure UA874US Active Directional Antenna, 470-698 MHz
Experience improved wireless reception with the UA874. This UHF antenna uses a log periodic dipole array to produce a cardioid pattern toward the desired coverage area, achieving greater rejection of RF signals outside the area than ...
100' UHF remote extension cable, BNC to BNC, RG213
Shure UA8100 100' UHF remote extension cable, BNC to BNC, RG213
Remote Antenna Extension Cable BNC to BNC, RG213 type, 100 foot (30m).Compatible with ULXS4, ULXP4, UC4, U4S and U4D.
50 ft UHF Remote Antenna Extension Cable with BNC Connectors
Shure UA850 50 ft UHF Remote Antenna Extension Cable with BNC Connectors
The Shure UA850 50 ft remote antenna extension cable features BNC connectors and RG8X/U type cable. It is compatible with their ULXS4, ULXP4, UC4, U4S and U4D models.
6' UHF coaxial cable, BNC to BNC
Shure UA806 6' UHF coaxial cable, BNC to BNC
Remote Antenna Extension Cable BNC-BNC, RG58C/U type 6 foot (2m).
Rackmount Kit for Single ULX Receiver
Shure UA506 Rackmount Kit for Single ULX Receiver
The Shure UA506 is a rackmount kit for mounting a single ULX receiver in to a standard 19" rack.
1/2 Wave Omnidirectional Antenna
Shure UA8 1/2 Wave Omnidirectional Antenna
The Shure UA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters. Features 0°, 45°, and 90° positioning for increased stability.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM