Elation Pro Lighting ENODE-8-PRO
8-Universe Artnet/sACN to DMX Interface

OUR PART #  ENODE-8-PRO


Elation's eNode8  is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All 8 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the front are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode8 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial.

Elation Professional ENODE-8-PRO Features:

  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Net™,sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Multi language support
  • Operation:
    • Ethernet <-> DMX conversion
    • Ethernet and DMX Merger
    • Ethernet and DMX Backup
    • DMX splitter / booster
    • DMX trigger. Remote selection of the control source
    • Built-in DMX soft-patch

Elation Professional ENODE-8-PRO Specifications:

  • Connections:
    • 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
    • 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)
  • Size / Weight:
    • Length: 19.0” (482mm)
    • Width: 6.3” (160mm)
    • Vertical Height: 1.7” (44mm)
    • Weight: 4.6 lbs. (2.1kg)
  • Electrical / Thermal:
    • AC 100-240V - 50/60Hz
    • 7W Max Power Consumption
    • 35.6°F (2°C) to 113°F (45°C)

Elation Pro Lighting ENODE-8-PRO
8-Universe Artnet/sACN to DMX Interface

OUR PART #  ENODE-8-PRO

Product Information:

Elation's eNode8  is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All 8 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the front are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode8 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial.

Elation Professional ENODE-8-PRO Features:

  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Net™,sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Multi language support
  • Operation:
    • Ethernet <-> DMX conversion
    • Ethernet and DMX Merger
    • Ethernet and DMX Backup
    • DMX splitter / booster
    • DMX trigger. Remote selection of the control source
    • Built-in DMX soft-patch

Elation Professional ENODE-8-PRO Specifications:

  • Connections:
    • 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
    • 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)
  • Size / Weight:
    • Length: 19.0” (482mm)
    • Width: 6.3” (160mm)
    • Vertical Height: 1.7” (44mm)
    • Weight: 4.6 lbs. (2.1kg)
  • Electrical / Thermal:
    • AC 100-240V - 50/60Hz
    • 7W Max Power Consumption
    • 35.6°F (2°C) to 113°F (45°C)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM