Apogee Sound (Bogen) AFI-3
Fixed Installation 10" Loudspeaker with 60° x 45° Pattern

OUR PART #  AFI-3


The Apogee Sound AFI-3 offers exceptional output power with excellent high frequency pattern control.  With the addition of a subwoofer, the AFI-3 can
handle high-level music in clubs and discos.  The AFI-3 high frequency horn comes in a 60° x 45° pattern. These horns and the logo plate are rotatable to allow alternative hanging positions.

The Apogee Fixed Installation Speakers (AFI-Series) feature high power output, a distinctive modern appearance, versatile rigging, and the characteristic low distortion response that makes Apogee products unique.

The AFI series is a "processor optional" series, allowing the installer to decide if and what type of processing they wish to employ.

The use of an AFI processing card affords the installer not only the protection of adjustable limiting circuits, but electronically enhances the acoustic performance of the AFI product for which it was designed. This affords the installer a fast, low cost, and accurate system set-up, leaving only room equalization as needed.

The AFI processor provides the following functions:

  • Active protective limiting to guard against abuse
  • Fixed EQ points to flatten the response and extend the low and high frequencies
  • Electronic crossovers for the bi-amped models

To help the installer get the maximum performance from our product, Apogee makes available all gain, limiting and equalization for the complete AFI series upon request.

Apogee Sound AFI-3 Specifications:

  • Driver Complement:
    • Low Frequency: One Apogee 10"(254mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
    • High Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
  • Input Connectors: Barrier strip, screw type #8
  • Compatible Processors: AFI Main Frame Controller Chassis (using AF I-3 Module) or DLC24
  • Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
  • Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
  • Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
  • Finish: Textured high-strength black or white epoxy paint; other colors (optional )
  • Enclosure Type: 30° trapezoidal, optimally-vented bass
  • Cabinet Construction: Multi-ply hardwood with stainless steel fasteners
  • Options/Accessories:
    • AFI Controller Processor or DLC24 Digital Processor
    • SX weather treatment for harsh environments
    • Assorted rigging components

Apogee Sound AFI-3 Engineering Data:

  • Format: Passive/Two-way
  • Dispersion: H: 60° x V: 45° (rotatable)
  • Frequency Response (1m on axis): 61 Hz to 20 kHz ± 3 dB
  • Max. SPL (@1m): 120 dB cont./126 dB peak
  • PTML (peak transient mechanical limit): 137 dB
  • Sensitivity (1W @ 1m): 98 dB SPL/100 Hz to 4 kHZ
  • Nominal Impedance: 8 ohms
  • Max. Power Handling: 200W cont./800W peak
  • Dimensions:
    • front: 13.5"(343 mm) W x 25.5"(648 mm) H
    • rear: 8.2"(207 mm) W x 25.5"(648 mm) H
    • depth: 12.1"(307 mm)
  • Weight: 45 lbs (21 kg)

Apogee Sound (Bogen) AFI-3
Fixed Installation 10" Loudspeaker with 60° x 45° Pattern

OUR PART #  AFI-3

Product Information:

The Apogee Sound AFI-3 offers exceptional output power with excellent high frequency pattern control.  With the addition of a subwoofer, the AFI-3 can
handle high-level music in clubs and discos.  The AFI-3 high frequency horn comes in a 60° x 45° pattern. These horns and the logo plate are rotatable to allow alternative hanging positions.

The Apogee Fixed Installation Speakers (AFI-Series) feature high power output, a distinctive modern appearance, versatile rigging, and the characteristic low distortion response that makes Apogee products unique.

The AFI series is a "processor optional" series, allowing the installer to decide if and what type of processing they wish to employ.

The use of an AFI processing card affords the installer not only the protection of adjustable limiting circuits, but electronically enhances the acoustic performance of the AFI product for which it was designed. This affords the installer a fast, low cost, and accurate system set-up, leaving only room equalization as needed.

The AFI processor provides the following functions:

  • Active protective limiting to guard against abuse
  • Fixed EQ points to flatten the response and extend the low and high frequencies
  • Electronic crossovers for the bi-amped models

To help the installer get the maximum performance from our product, Apogee makes available all gain, limiting and equalization for the complete AFI series upon request.

Apogee Sound AFI-3 Specifications:

  • Driver Complement:
    • Low Frequency: One Apogee 10"(254mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
    • High Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
  • Input Connectors: Barrier strip, screw type #8
  • Compatible Processors: AFI Main Frame Controller Chassis (using AF I-3 Module) or DLC24
  • Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
  • Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
  • Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
  • Finish: Textured high-strength black or white epoxy paint; other colors (optional )
  • Enclosure Type: 30° trapezoidal, optimally-vented bass
  • Cabinet Construction: Multi-ply hardwood with stainless steel fasteners
  • Options/Accessories:
    • AFI Controller Processor or DLC24 Digital Processor
    • SX weather treatment for harsh environments
    • Assorted rigging components

Apogee Sound AFI-3 Engineering Data:

  • Format: Passive/Two-way
  • Dispersion: H: 60° x V: 45° (rotatable)
  • Frequency Response (1m on axis): 61 Hz to 20 kHz ± 3 dB
  • Max. SPL (@1m): 120 dB cont./126 dB peak
  • PTML (peak transient mechanical limit): 137 dB
  • Sensitivity (1W @ 1m): 98 dB SPL/100 Hz to 4 kHZ
  • Nominal Impedance: 8 ohms
  • Max. Power Handling: 200W cont./800W peak
  • Dimensions:
    • front: 13.5"(343 mm) W x 25.5"(648 mm) H
    • rear: 8.2"(207 mm) W x 25.5"(648 mm) H
    • depth: 12.1"(307 mm)
  • Weight: 45 lbs (21 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM