Ashly ne24.24M 12X8
Networkable Matrix Processor with 12 in and 8 Out

OUR PART #  NE24.24M-12X8

Log In for price!

Don't have an account? Apply today!

Ashly’s NE-Series Protea ne24.24M digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the base unit’s total inputs or outputs four channels at a time. These cards are easily installed in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly’s Protea NE Software on a PC platform. No front panel controls and multi-level software security assures you a tamperproof audio system. Input channel processing blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic or line level. Output channel processing blocks consist of a Cross Point Mixer, HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the output section allows you to route any input to any output at any  level and mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12, 18, 24 and 48dB/octave slopes.

Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring input/output matrixing with signal processing.

Ashly ne24.24M Features:

  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Mic/Line inputs
  • 24-bit A/D–D/A audio resolution
  • 24-bit/150 MHz DSPs
  • Up to 24 channels of audio processing
  • 4x4 base unit configuration
  • Expand inputs or outputs 4 channels per module
  • Modules easily field installable
  • Euroblock connectors for audio, preset recall, DC remote level control and data in/out
  • 31 preset locations
  • Four dedicated remote controls for Level, Preset Recall and Programmable Functions
  • Third Party Control Friendly
  • Input and output metering viewable in dBu
  • Multi-level Security
  • Five year worry-free warranty
  • Safety/Compliance: (FCC, CE, RoHS)
  • Rear panel:
    • 10/100 Ethernet port
    • RS-232 Port
    • Euroblock inputs
    • Euroblock outputs
    • Remote level control

Ashly ne24.24M Specifications:

  • Input:
    • Active Balanced, 18kOhm
    • MaxInput Level: +20 dBu
    • Input Gain Range: -50dB to +12dB, polarity select
  • Output:
    • Active Servo-Balanced, 112 Ohm
    • Max Output Level:   +20 dBu
    • Output Gain Range:  -50dB to +12dB, polarity select
    • Frequency Response:  20 Hz-20kHz, +/- 0.25 dB
    • THD: <0.01% @1kHz, +20 dBu
    • Dynamic Range: >110dB (20 Hz-20 kHz) unweighted
    • Output Noise: <-90dBu unweighted
  • Mic Preamp:
    • Gain: 0dB, +20dB, +40dB, +60dB
    • Phantom Power: +48VDC, 9.6mA max, soft on/off
    • Equivalent Input Noise: -128 dBu, 20-20kHz, 50 Ohm source
  • Signal Generator:
    • White Noise, Pink Noise: 0dB
  • Eq Filters:
    • Number: 15 per Input, 15 perOutput
    • Selectable As:
      • Parametric:
        • Bandwidth: 1/64th Octave to 4 Octave
        • Range: +15/-30dB, 0.1 dB increments
        • Frequency Resolution:   1Hz
      • Low-Shelf:
        • Slope: Selectable 6 or12 dB/Octave
        • Frequency Range:   20Hz to 2KHz
        • Range: +/-15dB, 0.1dB increments
      • High-Shelf:
        • Slope: Selectable 6 or12dB/Octave
        • Frequency Range:   3.886KHz to 20KHz
        • Range: +/-15 dB, 0.1 dB increments
      • All-Pass:
        • Type: Second Order (-180 degrees)
        • Frequency Range:   20Hz to 20KHz
  • Crossover Filters:
    • High Pass Filter:
      • Type: Linkwitz-Riley, Bessel, Butterworth
      • Slope: 12,18, 24 and 48 dB/Octave
      • Frequency Range: Off to 20KHz, 1Hz increments
    • Low Pass Filter:
      • Type: Linkwitz-Riley, Bessel, Butterworth
      • Slope: 12,18, 24 and 48dB/Octave
      • Frequency Range: Off to 20Hz, 1Hz increments
  • Delay:
    • Input Maximum Delay: 682.5ms
    • Increment: 20µs
    • Output Maximum Delay: 682.5ms
    • Increment: 20µs
  • Gate:
    • Threshold: -80 to +20dBu, 1dBu increments
    • Floor: Off, -80 to 0dBu, 1dBu increments
    • Attack: 2, 0.5, 1, 2, 5, 10, 20, 50ms/dB
    • Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Autoleveler:
    • Target Level: -40 to +20dBu, 1dBu increments
    • Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
    • Hold Time: 0, 1, 2, 3, 4, 5, 6 Sec
    • Threshold Below Target -30 to 0dB, 1dB increments
    • Gain Increase Rate:  5, 10, 20, 50, 100, 200, 500, 1000ms/dB
    • Gain Decrease Rate:  5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Ducker:
    • Trigger Threshold:   -80 to +20dBu,1dBu increments
    • Ducker Depth: Off, -30 to 0dB, 1dBu increments
    • Ducker Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Cross Point Mixer:
    • Gain: -Inf, -50 to +12dB, 1dB increments with Mute
  • Compressor/Limiter:
    • Threshold: -20dBu to +20dBu, 1dB increments
    • Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2, 3, 4, 6, 10, 20, Infinite:1)
    • Attack: 0.5 ms to 50 ms per dB
    • Release: 10 ms to 1sec. per dB
  • Processor:
    • Input A/D: 24 bit
    • Output D/A: 24 bit
    • Processors: 24 bit signal, 48 bit filters, 56 bit accumulator
    • Sample Rate: 48 kHz
    • Propagation Delay: 1.46 ms
  • Other:
    • Power Requirements: 90 - 240VAC, 50-60Hz, 40W
    • Shipping Weight: 13 lbs (5.9 kg) max
    • Dimensions: 19" L x 3.5" H x 8.5" D (483 x 89 x 216 cm)
    • Connections: Euroblock
    • Environmental: 40-120 deg. F, (4-49 deg, C) non-condensing
  • General Purpose Logic Output Option:
    • Output Source Current Per Channel: 10mA
    • OutputVoltage: +12VDC
    • Output Supply Current: 100mA
    • Output Sink Current PerChannel: 100mA
    • Preset Recall
    • Data in and out ports
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Output
Ashly 24.24M-OUTPUT Expansion Module, 4 Output
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Input
Ashly 24.24M-INPUT Expansion Module, 4 Input
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

Ashly ne24.24M 12X8
Networkable Matrix Processor with 12 in and 8 Out

OUR PART #  NE24.24M-12X8

Product Information:

Ashly’s NE-Series Protea ne24.24M digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the base unit’s total inputs or outputs four channels at a time. These cards are easily installed in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly’s Protea NE Software on a PC platform. No front panel controls and multi-level software security assures you a tamperproof audio system. Input channel processing blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic or line level. Output channel processing blocks consist of a Cross Point Mixer, HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the output section allows you to route any input to any output at any  level and mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12, 18, 24 and 48dB/octave slopes.

Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring input/output matrixing with signal processing.

Ashly ne24.24M Features:

  • 10/100 Ethernet and RS-232 computer interface is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Mic/Line inputs
  • 24-bit A/D–D/A audio resolution
  • 24-bit/150 MHz DSPs
  • Up to 24 channels of audio processing
  • 4x4 base unit configuration
  • Expand inputs or outputs 4 channels per module
  • Modules easily field installable
  • Euroblock connectors for audio, preset recall, DC remote level control and data in/out
  • 31 preset locations
  • Four dedicated remote controls for Level, Preset Recall and Programmable Functions
  • Third Party Control Friendly
  • Input and output metering viewable in dBu
  • Multi-level Security
  • Five year worry-free warranty
  • Safety/Compliance: (FCC, CE, RoHS)
  • Rear panel:
    • 10/100 Ethernet port
    • RS-232 Port
    • Euroblock inputs
    • Euroblock outputs
    • Remote level control

Ashly ne24.24M Specifications:

  • Input:
    • Active Balanced, 18kOhm
    • MaxInput Level: +20 dBu
    • Input Gain Range: -50dB to +12dB, polarity select
  • Output:
    • Active Servo-Balanced, 112 Ohm
    • Max Output Level:   +20 dBu
    • Output Gain Range:  -50dB to +12dB, polarity select
    • Frequency Response:  20 Hz-20kHz, +/- 0.25 dB
    • THD: <0.01% @1kHz, +20 dBu
    • Dynamic Range: >110dB (20 Hz-20 kHz) unweighted
    • Output Noise: <-90dBu unweighted
  • Mic Preamp:
    • Gain: 0dB, +20dB, +40dB, +60dB
    • Phantom Power: +48VDC, 9.6mA max, soft on/off
    • Equivalent Input Noise: -128 dBu, 20-20kHz, 50 Ohm source
  • Signal Generator:
    • White Noise, Pink Noise: 0dB
  • Eq Filters:
    • Number: 15 per Input, 15 perOutput
    • Selectable As:
      • Parametric:
        • Bandwidth: 1/64th Octave to 4 Octave
        • Range: +15/-30dB, 0.1 dB increments
        • Frequency Resolution:   1Hz
      • Low-Shelf:
        • Slope: Selectable 6 or12 dB/Octave
        • Frequency Range:   20Hz to 2KHz
        • Range: +/-15dB, 0.1dB increments
      • High-Shelf:
        • Slope: Selectable 6 or12dB/Octave
        • Frequency Range:   3.886KHz to 20KHz
        • Range: +/-15 dB, 0.1 dB increments
      • All-Pass:
        • Type: Second Order (-180 degrees)
        • Frequency Range:   20Hz to 20KHz
  • Crossover Filters:
    • High Pass Filter:
      • Type: Linkwitz-Riley, Bessel, Butterworth
      • Slope: 12,18, 24 and 48 dB/Octave
      • Frequency Range: Off to 20KHz, 1Hz increments
    • Low Pass Filter:
      • Type: Linkwitz-Riley, Bessel, Butterworth
      • Slope: 12,18, 24 and 48dB/Octave
      • Frequency Range: Off to 20Hz, 1Hz increments
  • Delay:
    • Input Maximum Delay: 682.5ms
    • Increment: 20µs
    • Output Maximum Delay: 682.5ms
    • Increment: 20µs
  • Gate:
    • Threshold: -80 to +20dBu, 1dBu increments
    • Floor: Off, -80 to 0dBu, 1dBu increments
    • Attack: 2, 0.5, 1, 2, 5, 10, 20, 50ms/dB
    • Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Autoleveler:
    • Target Level: -40 to +20dBu, 1dBu increments
    • Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
    • Hold Time: 0, 1, 2, 3, 4, 5, 6 Sec
    • Threshold Below Target -30 to 0dB, 1dB increments
    • Gain Increase Rate:  5, 10, 20, 50, 100, 200, 500, 1000ms/dB
    • Gain Decrease Rate:  5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Ducker:
    • Trigger Threshold:   -80 to +20dBu,1dBu increments
    • Ducker Depth: Off, -30 to 0dB, 1dBu increments
    • Ducker Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
  • Cross Point Mixer:
    • Gain: -Inf, -50 to +12dB, 1dB increments with Mute
  • Compressor/Limiter:
    • Threshold: -20dBu to +20dBu, 1dB increments
    • Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2, 3, 4, 6, 10, 20, Infinite:1)
    • Attack: 0.5 ms to 50 ms per dB
    • Release: 10 ms to 1sec. per dB
  • Processor:
    • Input A/D: 24 bit
    • Output D/A: 24 bit
    • Processors: 24 bit signal, 48 bit filters, 56 bit accumulator
    • Sample Rate: 48 kHz
    • Propagation Delay: 1.46 ms
  • Other:
    • Power Requirements: 90 - 240VAC, 50-60Hz, 40W
    • Shipping Weight: 13 lbs (5.9 kg) max
    • Dimensions: 19" L x 3.5" H x 8.5" D (483 x 89 x 216 cm)
    • Connections: Euroblock
    • Environmental: 40-120 deg. F, (4-49 deg, C) non-condensing
  • General Purpose Logic Output Option:
    • Output Source Current Per Channel: 10mA
    • OutputVoltage: +12VDC
    • Output Supply Current: 100mA
    • Output Sink Current PerChannel: 100mA
    • Preset Recall
    • Data in and out ports
Remote, 6-button Network
Ashly NEWR-5 Remote, 6-button Network
The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
Programmable Zone Controller, Wall Mount, Six Button
Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M
The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
Network Fader Remote Control, 16 Channel
Ashly FR-16 Network Fader Remote Control, 16 Channel
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
8 channel Network Fader Remote Control
Ashly FR-8 8 channel Network Fader Remote Control
The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Output
Ashly 24.24M-OUTPUT Expansion Module, 4 Output
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Expansion Module, 4 Input
Ashly 24.24M-INPUT Expansion Module, 4 Input
Each card has four channels and provides all the DSP necessary for those four channels.
Usually ships in 7-14 business days.
Need it sooner? Call us!
8-Channel Remote Level Control
Ashly RW8C 8-Channel Remote Level Control
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop Remote
Ashly RD8C Desktop Remote
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
2 Control Level Wallplate Remote for Ashly 24.24M
Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M
The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.